Comparison

Spectrum Analyzer+ Audio FFT vs 気になる音チェッカー

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Spectrum Analyzer+ Audio FFT

Analyze live audio frequencies from your microphone to identify peak Hz, hums, and room modes. Capture and average sound over five seconds to pinpoint the strongest frequencies and their levels. Compare changes by saving reference captures and analyzing differences.

Highlights
  • Live frequency spectrum display
  • 5-second audio capture and averaging
  • Peak frequency and level identification
  • Adjustable dB range
  • Reference capture comparison
  • Specialized modes for voice, machine, and room acoustics
  • CSV export of spectrum data
Features
Read full description

Spectrum Analyzer+ Audio FFT shows the live frequency spectrum of any sound your iPhone microphone hears, then lets you capture a 5-second average and read the result: the strongest frequency in Hz, the top components and where the energy sits. ▶ See the spectrum live • 32 bands from 20 Hz to 20 kHz, computed with a 2048-point FFT • Four views: Bars with peak hold, Line, Waterfall and Spectrogram • Peak frequency and peak level update as you listen • Min / Max traces in the Bars view, tap a bar for a cursor readout, freeze the display to study it • Adjustable dB range from 30 to 120 dB ▶ Capture 5 seconds, get an answer Tap Capture 5 s under the graph and hold the sound steady. The app power-averages the spectrum over five seconds and shows a result card: • Strongest component in Hz, with the musical note and cents in Voice mode • Up to three top components with their levels • Share of the detected energy in the low, mid and high part of the selected range • Strongest band level and the FFT resolution of the measurement If the sound is too quiet in that range, the card says so instead of inventing a peak. ▶ Compare before and after Save a capture as a reference (up to 10). Make a change — move a speaker, add treatment, adjust a machine — capture again in the same mode and the card shows the average band-level difference in dB. References can also be overlaid on the live spectrum. ▶ Pick the job • Voice: 80–4000 Hz, shows the note of the strongest pitch • Machine: 20–2000 Hz, looks for 50/60 Hz mains hum and its harmonics • Room: 20–500 Hz, the low end where room modes build up ▶ Export and share • Export a CSV of the live spectrum or of a 5-second capture • Share a short text summary of a capture ▶ Extras • Calibration offset from −20 to +20 dB in 0.5 dB steps to line up with a reference meter • Pink noise generator, unlocked for 24 hours by watching a short ad • Interface in 30 languages ▶ Good to know Levels are relative to the microphone's full scale (dBFS). A phone microphone is not a certified sound level meter, so use the numbers to find frequencies and compare changes, not for compliance measurements. Audio is analysed in memory while you listen and is not saved as a recording. For musicians checking a tone, home studio and hi-fi owners chasing a boomy note, and anyone tracking down a hum from a fridge, fan or transformer.

About

気になる音チェッカー

Features
Read full description

身の回りで気になる高音や低音を、iPhoneで手軽に確認できるアプリです。 【高音を測る】 iPhoneのマイク入力を端末内で解析し、1〜20 kHzの範囲で最も強い高音成分の周波数と相対レベルを表示します。蛍光灯、安定器、電子機器などから聞こえる高音の確認に利用できます。 【低音を測る】 20〜250 Hzの範囲を解析し、室外機、換気扇、エンジン音など、測定周波数から考えられる音源の例を表示します。推定音量に応じて「会話程度」「掃除機程度」「近くのクラクション程度」など、身近な音との比較も確認できます。 【聞こえ方テスト】 静かな場所でiPhone本体のスピーカーを使い、1〜18 kHzのテスト音を確認します。再生ボタンは最初に1回押すだけ。その後は「聞こえた」「聞こえない」を選ぶと、自動で次の周波数へ進みます。 聞こえなくなった帯域では、最後に聞こえた音との間を500 Hz刻みで詳しく確認します。結果画面では、聞こえた最高周波数、国内の平均傾向を参考にした参考聴覚年齢、年齢別の聞こえやすい高音の目安グラフを表示します。 【ご利用上の注意】 ・測定周波数、音源候補、音量比較は参考値です。音源を断定するものではありません。 ・iPhoneのマイクは騒音計として校正されていないため、表示するdB相当値や「クラクション程度」などの比較は正確な騒音測定には使用できません。 ・端末、周囲の音、距離、向き、個人差によって結果が変わります。 ・聞こえ方テストは娯楽・セルフチェック用であり、聴力検査や医学的診断には使用できません。 ・無理に音量を上げず、耳鳴り、痛み、不快感がある場合はすぐに使用を中止してください。 ・聞こえに不安がある場合は、耳鼻咽喉科や聴覚の専門家へご相談ください。

Screenshots

Spectrum Analyzer+ Audio FFT3 screens
気になる音チェッカー4 screens

Verdict

The call

The clearest difference is ads: 気になる音チェッカー at none against Spectrum Analyzer+ Audio FFT's listed. On price, in-app purchases, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ad data · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ad data · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

Scorecard1 real difference · 9 level
Spectrum Analyzer+ Audio FFT versus 気になる音チェッカー: the parameters behind the verdict, then further details
ParameterSpectrum Analyzer+ Audio FFT気になる音チェッカー
PriceFreeFree
Rating2.6 (5 ratings) — better—
Positive reviews0.0% of reviews—
Number of ratings5 — better—
Update frequencyEvery 4 days—
Ad dataYesNo — better
In-app purchasesNoNo
MonetizationAd-supported—
DevicesiPhoneiPhone
Requires iOS17.017.0
Further details — not scored
Size100 MB1 MB
Age rating17+4+
DeveloperKyu-Hee JangL AND R TRADE STAGE LIMITED LIABILITY CO.

In-app purchases

None

Spectrum Analyzer+ Audio FFT

No in-app purchases

None

気になる音チェッカー

No in-app purchases

Questions

Is Spectrum Analyzer+ Audio FFT free?
Spectrum Analyzer+ Audio FFT is free to download, with no in-app purchases.
Is 気になる音チェッカー free?
気になる音チェッカー is free to download, with no in-app purchases.
Do Spectrum Analyzer+ Audio FFT or 気になる音チェッカー have ads?
The App Store privacy details of Spectrum Analyzer+ Audio FFT list data used for advertising; those of 気になる音チェッカー do not.

Other comparisons