新途动力 vs MultiVolt

新途动力是一款配合新途动力智能电池设备使用的移动端管理工具，适用于两轮车电池、智能锂电池及相关设备的日常查看与维护。 通过应用连接已绑定设备后，用户可以查看电池运行状态、关键参数、温度信息、告警信息及设备位置，帮助用户更直观地了解电池当前状态，提升设备使用和维护效率。 主要功能： 电池状态查看 支持查看电量百分比、续航里程、电池电压、电池电流、剩余容量等核心信息。 关键参数监测 支持查看平均电压、电芯最高电压、电芯最低电压、电芯最大压差等关键数据，便于了解电池组运行状态。 温度信息查看 支持查看 MOS、T1、T2、T3 等温度数据，帮助用户关注设备运行温度变化。 告警与保护信息 支持查看设备保护信息和告警信息，及时了解异常状态。 设备位置查看 支持查看已绑定设备的位置信息，便于用户了解设备所在位置。 基础控制功能 支持充电 MOS、放电 MOS、蜂鸣器报警等相关功能查看与控制，具体功能以设备支持能力为准。 本应用需配合新途动力相关智能电池设备使用。部分功能需要设备在线、蓝牙连接或网络连接后才能正常使用。定位信息仅用于展示已绑定设备位置及相关设备管理功能。

MultiVolt shows what your camper batteries are doing — all of them at once. The app connects over Bluetooth directly to the battery management system and reads what it measures anyway: state of charge, voltage, current, power, every single cell voltage, temperature and the BMS protection flags. No account, no cloud, no internet. THE WHOLE BANK AT A GLANCE Several batteries add up to one balance — weighted by capacity, not simply averaged. A 200 Ah battery at 90 % and a 50 Ah one at 10 % make 74 % together, not 50 %. Runtime is calculated from the smoothed current: a cycling compressor fridge no longer makes the estimate jump between 40 hours and 2 hours. EVERY CELL ON ITS OWN Cell voltages as bars, the spread in millivolts, the active balancer. When a cell drifts away, you see it before the BMS shuts down. LIMITS YOU SET YOURSELF State of charge, cell voltage high and low, cell drift, temperature, charging in the cold, current. Per-battery limits where batteries differ — a 280 Ah battery takes currents a 100 Ah one does not. HONEST READINGS A value the BMS does not report shows as "--", never as zero. Zero is a statement; a missing value is not. When a protocol reports no protection status, it says so — instead of a reassuring green check mark. TRY IT WITHOUT A BATTERY Demo mode simulates three batteries with real LiFePO4 physics and stays free forever. You see the whole app before pairing anything. SUPPORTED SYSTEMS • Ective and identical Topband modules (also StartCraft, KiloVault, Wattstunde) • JBD / Xiaoxiang and equivalents • Daly Smart BMS (D2 series and relatives) FREE AND PRO One battery is free — with every reading, all limits, the history and all warnings. MultiVolt Pro monitors up to six batteries at once. IMPORTANT MultiVolt is a display and a log, not a safety device. No commands are sent over Bluetooth — the app only reads. Deep discharge protection, cut-off and overcurrent protection belong in the BMS and must work without a phone. SUBSCRIPTION AND TERMS MultiVolt Pro is a subscription with a monthly or yearly term. It renews automatically until it is cancelled; cancellation is done in the App Store account at least 24 hours before the current period ends. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://multivolt.dkcloud.at/privacy