Studkit vs Stud Finder App
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Studkit
This app uses your iPhone's magnetic sensor to locate studs, nails, screws, and pipes within walls. It also includes a bubble level, laser cross, drill guide, measurement converter, and timestamp camera for various DIY and home improvement tasks.
- Magnetic stud finder
- Bubble level with multiple modes
- Self-leveling laser crosshair
- Smart drill guide recommendations
- Millimeter to inch converter
- Timestamp camera with GPS
Read full descriptionHide full description
Studkit finds studs, nails, screws, pipes, and metal hidden inside any wall using your iPhone's built-in magnetic sensor - no extra hardware. Plus five more pro DIY tools in one app: bubble level, laser cross, drill guide, mm to inch converter, and timestamp camera. The complete builder's toolkit for hanging frames, mounting shelves, or any home improvement job. --- SIX PRO TOOLS IN ONE APP * STUD FINDER Uses your iPhone's built-in magnetometer to detect nails inside wood studs and metal studs in any wall. Sweep slowly, watch the live trace, mark the wall when the meter peaks. Works through drywall, plaster, and most paint. * BUBBLE LEVEL Three modes (horizontal, vertical, and surface) for aligning frames, hanging shelves, leveling appliances. Accurate to under 1 degree in real-world use. * LASER CROSS A self-leveling crosshair you project onto any wall to mark a perfectly level line. Hold the phone against the surface, mark with a pencil, hang your art straight every time. * DRILL GUIDE Pick your wall type (drywall, brick, concrete, plaster, tile) and the load weight. Studkit recommends the exact drill bit size, anchor type, and pilot depth. No more ruined walls. * CONVERTER Quick mm to inch table with the most common screw, bit, and lumber sizes pre-listed. Tap to copy any value. * TIMESTAMP CAMERA Take photos with the current date, time, and GPS coordinates burned directly into the image. Perfect for documenting work, before and after shots, contractor reports. --- WHY A TOOLKIT INSTEAD OF SIX APPS Most DIY apps do one thing. Studkit is the kit you reach for every time you pick up your phone before picking up a hammer. One subscription, six tools, zero clutter on your home screen. --- HOW STUDKIT FINDS STUDS The iPhone has a 3-axis magnetometer, the same sensor that powers Compass. Studkit reads it 60 times per second and watches for distortions in the magnetic field. Iron and steel objects bend the field around them. WILL FIND: nails and screws inside wood studs, steel studs in commercial walls, iron and steel pipes, metal junction boxes. WILL NOT FIND: wood studs without any nails (very rare), plastic, PEX or copper pipes, electrical wires (unless in metal conduit), or anything deeper than about 8 cm / 3 inches. These are physics limits, no app can change this. For best results: remove your phone case (especially MagSafe), decide your scanning pose first, then press power. Hold the back of the phone flat against the wall and sweep at about one finger-width per second. --- WHO IT IS FOR DIY enthusiasts. Renters who do not want to buy six separate hardware-store tools. Carpenters wanting a backup kit. Contractors documenting work. Anyone tired of switching apps every time they pick up a screwdriver. --- PRO SUBSCRIPTION Studkit Pro unlocks all six tools. Choose Weekly ($4.99/week) or Yearly ($29.99/year, best value). Cancel anytime from your Apple ID settings. No ads ever. Auto-renewable subscription. Payment is charged to your Apple ID at confirmation of purchase. Subscription renews automatically unless cancelled at least 24 hours before the end of the current period. You can manage and cancel subscriptions in your Apple ID account settings after purchase. Privacy Policy: https://sites.google.com/view/privacy-policy-zelat/inicio Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Stud Finder App
This tool uses your phone's magnetometer to detect metal objects within walls, such as nails, screws, pipes, and rebar. It offers different modes for finding studs or larger metal objects and can even overlay stud locations on your camera view in augmented reality.
- Magnetometer-based stud and metal detection
- Multiple scan modes (Stud, Metal, Deep Scan Pro)
- Augmented reality wall view (Pro)
- Haptic and sound alerts
- Live field strength readings
- Calibration to your environment
- Save and review past scans
Read full descriptionHide full description
Find the stud before you drill. Stud Finder turns your iPhone's built-in magnetometer into a magnetic stud finder. It picks up the steel nails and screws that hold drywall to the studs, and warns you about the pipes, rebar and conduit you don't want to hit. Lay your phone flat on the wall, let it calibrate, then slide it slowly. The gauge climbs as you get closer to metal, and the scanner lights up, beeps and buzzes when it finds something. THREE SCAN MODES Stud Mode: Tuned for the small, brief signal of a nail or screw. Follow the line of fasteners to find the stud. Metal Mode: Less sensitive, so only larger metal like pipes, plates and steel studs stands out. A line of nails won't set it off, so you can tell a fastener from a pipe. Deep Scan (Pro): The most sensitive mode, for fasteners set deeper in the wall that Stud Mode can pass right over. WALL VIEW (PRO) Found one stud? Point your camera at the wall and Wall View draws a line on it in AR, then marks where the next studs should be at your stud spacing: 16 or 24 inches, or 40 or 60 cm. Slide your phone onto a predicted line to check it, and tap to confirm. Predicted lines are estimates. Doubled studs around doors, windows and corners can break the pattern, so check each one with the scanner before you drill. FEATURES • Calibrates against your own wall, so readings fit the room • Live field strength in microtesla (µT) or milligauss (mG) • Low, normal and high sensitivity • Haptic and sound alerts: one beep for a possible stud, three for metal • Save scans and look back at them later • Keep the screen awake while you scan • A step-by-step guide that walks you through hanging a shelf, from the first stud to the last screw • Available in 13 languages FREE AND PRO Stud Mode, Metal Mode and calibration are free. The free plan includes 3 scans of up to a minute each. After that, watch a short ad for another scan, as often as you like. You can keep up to 5 saved scans. Stud Finder Pro adds: • Deep Scan • Wall View • Unlimited scans with no time limit and no ads • Unlimited saved scans If your plan starts with a free trial, we'll remind you two days before it ends. HOW IT WORKS, AND WHAT IT CAN'T DO We want you to know exactly what you're getting. Your phone's magnetometer senses magnetic fields, so it detects ferrous metal: steel nails, screws, pipes, rebar and conduit. Wood isn't magnetic, and no phone can detect it directly. Stud Finder finds studs the way a magnetic stud finder does, by finding the metal fasteners holding them in place. That's why the app reports what it finds by signal strength instead of claiming to identify materials. If a reading in Stud Mode is unusually strong, it tells you it's likely metal rather than a stud. Results depend on your device's magnetometer, the wall material and how deep the metal is. Detection is less reliable through thick plaster, tile, concrete or metal lath. Always check before you drill, and never rely on any app alone where there may be electrical wiring or plumbing. SUBSCRIPTIONS Payment is charged to your Apple ID when you confirm your purchase. Subscriptions renew automatically unless cancelled at least 24 hours before the end of the current period. You can manage or cancel them in your App Store account settings. PRIVACY Your saved scans are stored on your device. Privacy Policy: https://redizeuz.com/privacy Terms of Use: https://redizeuz.com/terms
Screenshots
Verdict
The clearest difference is rating: Studkit at 5.0 against Stud Finder App's 3.8. Studkit also leads on ads (none vs shown). Stud Finder App's advantage is ratings volume (6 vs 2). On price, in-app purchases, monetization model and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Studkit sells 2 in-app purchases, starting at $4.99 per 7 days and Stud Finder App sells 2 in-app purchases, starting at $9.99 per year. Whichever you choose, the download price is not the number that matters.
Studkit holds the better App Store score, 5.0 against 3.8. Both are backed by a comparable volume of ratings — 2 and 6 respectively.
| Parameter | Studkit | Stud Finder App |
|---|---|---|
| Price | Free | Free |
| Rating | 5.0 (2 ratings) — better | 3.8 (6 ratings) |
| Positive reviews | — | 80.0% of reviews |
| Number of ratings | 2 | 6 — better |
| Update frequency | — | Every 2 months |
| Ads | No — better | Yes |
| In-app purchases | Yes | Yes |
| Monetization | Freemium | Free with in-app purchases |
| Devices | iPhone | iPhone, iPad — better |
| Requires iOS | 17.0 — better | 17.6 |
| Further details — not scored | ||
| Size | 8 MB | 20 MB |
| Age rating | 4+ | 4+ |
| Developer | Mohammed Baydi | Ebenezer Oteng |
In-app purchases
Studkit
- Weekly Access$4.997 Days
- Yearly Access$29.991 Year
Stud Finder App
- Yearly$9.991 Year
- Lifetime$7.99
Questions
Is Studkit free?
Is Stud Finder App free?
Which has better reviews, Studkit or Stud Finder App?
Do Studkit or Stud Finder App have ads?
Other comparisons















