Comparison

Tresse Polyphonic Synthesizer vs AuTranspose

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Tresse Polyphonic Synthesizer

This app is a powerful polyphonic synthesizer for iPhone and iPad, featuring 39 diverse sound engines and a generative step sequencer. It offers extensive sound-shaping capabilities with dual layers, morphing filters, and flexible LFOs and envelopes. It functions as a standalone app or an AUv3 plugin.

Highlights
  • 39 diverse sound engines
  • Dual-layer synthesis
  • Morphing SEM-style filter
  • Generative step sequencer
  • AUv3 plugin support
  • Extensive modulation options
  • Preset sharing via QR codes
Read full description

TRESSE is a polyphonic synthesizer that merges 39 sound engines into one instrument for iPhone and iPad. It runs standalone and as an AUv3 plugin inside AUM, AudioBus, and GarageBand. Twenty-four engines come from Classic MI Plaits: subtractive, FM, wavetable, additive, granular, speech and formant, chords, resonators, and analog-modelled drums. Fifteen more are custom, ported and extended: Karplus-Strong strings, vowel formants, modal and sympathetic-string resonators, a seven-saw supersaw, Hammond-style drawbars, bytebeat, and a multi-waveform wavefolder. TWO LAYERS, ONE VOICE Run two engines at once and crossfade them with the balance knob - each layer has its own filter, envelopes and voice mode. A self-stable SEM-style filter morphs continuously from lowpass to bandpass to highpass to notch and stays stable at full resonance. Two ADSR envelopes per layer shape amplitude and filter independently. Three six-shape LFOs and two step-sequenced MOD lanes route to almost anything - timbre, filters, the layer balance, even the sequencer's own knobs. A master chain adds chorus, tape, ping-pong and lo-fi delays, hall, room, plate and shimmer reverbs, and a wavefolder. GENERATIVE SEQUENCER, POWERED BY VEKTE A generative step sequencer drives the synth with seven algorithms - wave interference, Euclidean, random walk, logistic map, cellular automata, Kaprekar and Fibonacci. Shape the pattern with DENSE, probability, swing or humanize, tie and strum over a full scale and chord system. The arpeggiator can play the main sequence itself - with or without its intervals - or walk your held notes in seven modes. Two synth-macro knobs put any synth parameter on the sequencer page. Presets save, load and rename instantly - and share as compact text keys or QR codes anyone on TRESSE can load. FORMAT AND COMPATIBILITY TRESSE is an iOS standalone app and an AUv3 instrument. Load it in any AUv3 host, including AUM, AudioBus, and GarageBand. Its state saves with your host project. It responds to MIDI note input from any connected keyboard or controller, with MIDI learn on every knob. FREE, ADVANCED, PRO FREE plays all factory presets and offers one editable oscillator layer using EastCoast or RingsInh, the Euclidean algorithm, up to 16 steps, three divisions, three scales and three chord options. LFO editing, Shimmer, MIDI Learn and split sequencing require an upgrade. Manual MIDI CC assignment remains available. ADV unlocks the 24-engine instrument, two editable layers, split sequencers, 32 steps, LFO 1, every algorithm, the arpeggiator, divisions up to 2 bars, Ping Pong, all scales and chords, Shimmer, MIDI Learn, MOD 1 and preset saving. PRO upgrades ADV with 15 additional Våld engines, 64 steps, LFOs 2 and 3, MOD 2, timing options up to 16 bars, Random Walk direction and oscillator/sequence copy-paste. FULL includes ADV and PRO in one purchase. All are one-time purchases covering the standalone app and AUv3 extension. UPDATING FROM AN EARLIER VERSION Version 1.3.0 changes the FREE editing limits. Features previously editable for free, including LFO 1, the second oscillator layer, Shimmer and MIDI Learn, now require ADV or FULL. FREE sequences are editable up to 16 steps. Existing preset and host-project settings are retained: locked features continue to play, but editing them requires the relevant pack. Already available also on desktop as VST3 and AU, for macOS and Windows.

About

AuTranspose

This utility plugin allows for simple pitch-shifting and detuning of audio. It offers a range of +/- two octaves in semitones and +/- 100 cents detune. While it introduces audio latency, it's suitable for tasks like adjusting backing tracks to a more comfortable key or remixing projects.

Highlights
  • Pitch shifting +/- two octaves
  • Semitone detune +/- 100 cents
  • AUv3 effects plugin
  • Standalone or host compatible
  • Latency reporting on UI
  • Universal Purchase
Read full description

AuTranspose is a simple pitch-shifting / transpose utility plugin with a range of +/- two octaves in semitones, and a +/- 100 cents detune (semitone up or down). Please note that AuTranspose has audio latency (see the PLEASE READ section below) so it is not really suitable for realtime pitch shifting in situations where timing is critical - for example, shifting the pitch of an instrument as you play it or syncing multiple tracks in a live performance. AuTranspose is an AUv3 effects plugin that can run standalone, or in any AUv3 compatible host such as Logic Pro, GarageBand or AUM. AuTranspose currently runs on iPadOS / iOS (iPad & iPhone) and macOS (Intel & Silicon) and is available as a Universal Purchase from the Apple App Store. If you’re planning on using AuTranspose on Mac / desktop, please ensure that your favourite DAW / host supports AUv3 (not just AU). PLEASE READ THIS SECTION CAREFULLY! AuTranspose uses a pitch shifting technique that adds latency (delay) to the processed audio. Please note that this is unrelated to your audio interface buffer size or sample rate. The quality of the pitch conversion is a compromise between low latency or decent quality results - unfortunately, you can’t have both. AuTranspose can get as low as around 25ms latency which is just about good enough for a guitar octaver type application, but will probably sound a bit “wobbly” / “lo-fi” on more general audio. If you’re interested in a more guitar-centric octaver, please check out OttavaBassa which uses similar DSP, but tuned for guitar. AuTranspose does not report its latency to the host! This is by design. Instead, the current latency is shown on the UI in samples (and ms) so you can decide yourself if you need to compensate for it - for example, when remixing projects and you need to re-sync tracks that aren’t going through AuTranspose. So what is it for, and why did I make it? In my own search for a simple pitch shifter, I found that the really simple ones didn’t sound so good, and the ones that did produce good results were fairly complicated and / or CPU intensive. So I tried to make something that was very simple to use, that produced reasonable results. When might AuTranspose be useful? Backing tracks: You might want to transpose up or down by a semitone or two to put the song in a more comfortable key to sing, or perhaps you tune your guitar to Eb. In these situations, you could probably transpose the whole track up or down and it’ll still sound OK. The only other thing to keep in mind is that the playback of the track will be delayed by the latency so as long as the backing track doesn’t have to sync with anything else, you should be fine. Remixing recorded projects: Perhaps you have a project that’s audio only and you’ve decided it needs to be in a different key. You could use AuTranspose to pitch-shift the tracks or stems that need to be in key, but leave the percussion tracks as they are. You can then add a sample length delay (*) to these tracks so that everything plays in sync. For convenience AuTranspose reports the number of samples to adjust by. And of course, you could simply use AuTranspose as an effect in itself, for example as a “Lo-Fi” pitch shifter for a retro vibe. There are a few examples in the factory presets to get you started. (*) In cases where you need to compensate for latency on tracks that aren’t using AuTranspose, add a sample delay plugin to those tracks and set the number of samples to what’s reported on the AuTranspose UI. There are several sample delay plugins available, although many of the free ones (Apple’s included) don’t go that high. By the time you read this, MicroLag should be available which supports longer delay times.

Screenshots

Tresse Polyphonic Synthesizer4 screens
AuTranspose1 screens

Verdict

The call

The clearest difference is price: Tresse Polyphonic Synthesizer at Free against AuTranspose's $2.99. Tresse Polyphonic Synthesizer also leads on update cadence (every 10 days vs every 2 months) and ratings volume (4 vs 1). AuTranspose's advantage is rating (5.0 vs 4.8). On ads, in-app purchases, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Tresse Polyphonic Synthesizer is free to download; AuTranspose costs $2.99 up front. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

AuTranspose holds the better App Store score, 5.0 against 4.8. Both are backed by a comparable volume of ratings — 4 and 1 respectively.

UpkeepUpdate frequency

Tresse Polyphonic Synthesizer ships an update every 10 days, AuTranspose every 2 months. The most recent releases landed on November 18, 2026 and November 15, 2026 respectively.

Scorecard5 real differences · 5 level
Tresse Polyphonic Synthesizer versus AuTranspose: the parameters behind the verdict, then further details
ParameterTresse Polyphonic SynthesizerAuTranspose
PriceFree — better$2.99
Rating4.8 (4 ratings)5.0 (1 ratings) — better
Positive reviews—100.0% of reviews
Number of ratings4 — better1
Update frequencyEvery 10 days — betterEvery 2 months
AdsNoNo
In-app purchasesNoNo
MonetizationFree with in-app purchases — betterPaid
DevicesiPhone, iPad, iPodiPhone, iPad, iPod, Mac — better
Requires iOS14.0 — better15.0
Further details — not scored
Size36 MB22 MB
Age rating4+4+
DeveloperJaime Filipe Candido Paiva VieiraRob Jackson

Customer experience

Tresse Polyphonic Synthesizer

All ratings2 ratings
Positive100.0%
Neutral0.0%
Negative0.0%

AuTranspose

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews2 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

Tresse Polyphonic Synthesizer

No in-app purchases

None

AuTranspose

No in-app purchases

Questions

Is Tresse Polyphonic Synthesizer free?
Tresse Polyphonic Synthesizer is free to download, with no in-app purchases.
Is AuTranspose free?
AuTranspose costs $2.99, with no in-app purchases.
Which has better reviews, Tresse Polyphonic Synthesizer or AuTranspose?
AuTranspose is rated higher. Tresse Polyphonic Synthesizer averages 4.8 out of 5 from 4 ratings, while AuTranspose averages 5.0 from 1 ratings.
Do Tresse Polyphonic Synthesizer or AuTranspose have ads?
Neither Tresse Polyphonic Synthesizer nor AuTranspose shows ads.
Which is updated more often, Tresse Polyphonic Synthesizer or AuTranspose?
Tresse Polyphonic Synthesizer ships an update every 10 days, and AuTranspose every 2 months. Most recently, Tresse Polyphonic Synthesizer was updated on November 18, 2026 and AuTranspose on November 15, 2026.

Other comparisons