EchoSketch vs AuTranspose

EchoSketch turns delay and reverb into a live, playable instrument. Shape your sound in real time using a responsive X/Y performance surface designed for intuitive touch expression. At its core are four great-sounding delays: digital, analog, ping-pong, and reverse. The range for each parameter and the XY axes direction can be set independently, allowing you to easily morph between sounds. It works as an Audio Unit plugin or standalone — iOS or Mac. Comprehensive Delays • Digital (patterned after a legendary '80s rack delay), Analog (warm, with tape-style pitch glide), Reverse, and Left/Right Ping-Pong • Delay times can sync to tempo or be set in milliseconds • Feedback features delay-dependent tone shaping — bright for short delays and darker for long ones Convolution Reverb • Stereo or mono Spring, Plate, and Hall • Reverb path is separate from the delay (same as vintage tape echo units), so repeats don’t get washed out Modulation and Filter • Analog-style modulation for chorused, warbly pitch echoes • Tone control — darken or brighten delays, with a center detent for flat Designed for Hands-On Performance • HOLD / LIFT — leave the XY cursor in place, or touch the pad for momentary delay sounds • FREEZE — set the current feedback into an infinite loop and play over it • MOTION — record a gesture on the XY pad and loop it Presets and More • Presets are transferable between hosts • Two looks — light "Trail" and dark "Glow" • Works standalone with live audio or as an AUv3 plugin • Universal — iPad/iPhone also gets you the Mac version — one purchase • Mac: after installing, open EchoSketch once to use it as a plugin in your DAW • Works in AUM, AudioBus, GarageBand, Logic, and other AUv3 hosts

AuTranspose is a simple pitch-shifting / transpose utility plugin with a range of +/- one octave in semitones, and a +/- 100 cents detune (semitone up or down). Please note that AuTranspose has audio latency (see the PLEASE READ section below) so it is not really suitable for realtime pitch shifting in situations where timing is critical - for example, shifting the pitch of an instrument as you play it or syncing multiple tracks in a live performance. AuTranspose is an AUv3 effects plugin that can run standalone, or in any AUv3 compatible host such as Logic Pro, GarageBand or AUM. AuTranspose currently runs on iPadOS / iOS (iPad & iPhone) and macOS (Intel & Silicon) and is available as a Universal Purchase from the Apple App Store. If you’re planning on using AuTranspose on Mac / desktop, please ensure that your favourite DAW / host supports AUv3 (not just AU). PLEASE READ THIS SECTION CAREFULLY! AuTranspose uses a pitch shifting technique that adds latency (delay) to the processed audio. Please note that this is unrelated to your audio interface buffer size or sample rate. The quality of the pitch conversion is a compromise between low latency or decent quality results - unfortunately, you can’t have both. AuTranspose can get as low as around 25ms latency which is just about good enough for a guitar octaver type application, but will probably sound a bit “wobbly” / “lo-fi” on more general audio. If you’re interested in a more guitar-centric octaver, please check out OttavaBassa which uses similar DSP, but tuned for guitar. AuTranspose does not report its latency to the host! This is by design. Instead, the current latency is shown on the UI in samples (and ms) so you can decide yourself if you need to compensate for it - for example, when remixing projects and you need to re-sync tracks that aren’t going through AuTranspose. So what is it for, and why did I make it? In my own search for a simple pitch shifter, I found that the really simple ones didn’t sound so good, and the ones that did produce good results were fairly complicated and / or CPU intensive. So I tried to make something that was very simple to use, that produced reasonable results. When might AuTranspose be useful? Backing tracks: You might want to transpose up or down by a semitone or two to put the song in a more comfortable key to sing, or perhaps you tune your guitar to Eb. In these situations, you could probably transpose the whole track up or down and it’ll still sound OK. The only other thing to keep in mind is that the playback of the track will be delayed by the latency so as long as the backing track doesn’t have to sync with anything else, you should be fine. Remixing recorded projects: Perhaps you have a project that’s audio only and you’ve decided it needs to be in a different key. You could use AuTranspose to pitch-shift the tracks or stems that need to be in key, but leave the percussion tracks as they are. You can then add a sample length delay (*) to these tracks so that everything plays in sync. For convenience AuTranspose reports the number of samples to adjust by. And of course, you could simply use AuTranspose as an effect in itself, for example as a “Lo-Fi” pitch shifter for a retro vibe. There are a few examples in the factory presets to get you started. (*) In cases where you need to compensate for latency on tracks that aren’t using AuTranspose, add a sample delay plugin to those tracks and set the number of samples to what’s reported on the AuTranspose UI. There are several sample delay plugins available, although many of the free ones (Apple’s included) don’t go that high. By the time you read this, MicroLag should be available which supports longer delay times.