Comparison

MeshCore Update vs CairnOS

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

MeshCore Update

This utility app facilitates firmware updates for compatible MeshCore repeater devices. It supports both Bluetooth DFU and Wi-Fi OTA update methods, allowing users to download firmware, manage local files, and initiate the update process.

Highlights
  • Bluetooth DFU updates
  • Wi-Fi OTA updates
  • Check official firmware releases
  • Download firmware packages
  • Local firmware file management
  • Scan for compatible devices
Features
Read full description

MeshCore Update is a hardware utility app for updating supported MeshCore repeater devices. The app supports two firmware update methods: • Bluetooth DFU for supported nRF52-based MeshCore devices • Wi-Fi OTA for supported ESP32-based MeshCore devices You can select a supported hardware target, check official MeshCore firmware releases, download matching firmware packages, keep firmware files locally on your iPhone, and start the update flow from one place. For Bluetooth DFU devices, the app scans for compatible OTA / DFU devices and uploads the selected firmware package over Bluetooth. For ESP32 devices, the app connects to the device’s MeshCore OTA Wi-Fi access point and uploads the selected firmware using the device’s local OTA update interface. No login or account is required. Full firmware update testing requires supported MeshCore hardware. Without hardware, you can still browse supported targets, check official releases, download firmware files, and manage the local firmware repository.

About

CairnOS

Communicate off-grid using a mesh network of LoRa radios. Send messages, join channels, and track message paths without cell service or internet. Monitor radio status, network activity, and environmental data.

Highlights
  • Off-grid LoRa mesh messaging
  • Direct messages and channels
  • Message delivery status and retries
  • On-device message translation
  • Radio dashboard and settings
  • Node and repeater management
  • Spectrum analysis and charting
Features
Read full description

CAIRN is a companion app for MeshCore LoRa mesh radios. Pair your radio over Bluetooth or WiFi and send messages through a community-built network of radios and repeaters, with no cell service, no internet and no account. MESSAGING - Direct messages, channels and room servers in one inbox, with filters and favorites on top - Public, private and hashtag channels; share or join a channel by QR code - Delivery status, with retry for failed sends - Emoji reactions, @mentions, forwarding, search and text selection - Every hop of a message's path, on a list and a map - On-device translation of incoming messages - Chats kept on a Cairn touch radio come over to the app when you pair - Block contacts or channel senders, filter keywords and mute conversations - Sign and verify messages with your radio's identity - Optional link previews, with a warning for known malware links DASHBOARD - Battery, chats, nodes nearby, GPS, radio and network at a glance; tap a card for its settings - Your channel live on the Traffic card, in the chart style you pick, with the latest packet under it - Every tool behind one Tools button: Scan & Traffic, Send Advert, Trace Path and more - Sunrise, sunset, uptime and the radio's temperature sensor SETTINGS - One Settings page behind the gear, with search and your radio at the top - Radio presets by region, or set frequency, bandwidth, spreading factor, coding rate and TX power yourself - Front-End LNA and Boosted RX Gain on radios that have them - Firmware updates for nRF52 Cairn radios over Bluetooth, with a log if anything stops NODES & REPEATERS - Saved and heard nodes, with favorites on top, search, sort, filters and a card or list layout - A page for every node, with a map, readings and quick actions - Log in to your repeaters and room servers for status, telemetry, neighbors and an SNR map, and change their settings or use the remote CLI - Send commands to your own companion radios over the mesh (MeshCore 1.18 firmware) - Repeaters and room servers keep time: their clock is set from the phone after an admin login - Telemetry history charts, contact groups, QR sharing and a manual path editor SPECTRUM - Live noise floor, packet traffic, signal margin and airtime on your frequency, moving at the screen's pace - Five chart styles: Modern, Radio Screen, Analyzer, Waterfall and Line Chart, the same on every radio - Full screen like a radio's front panel, readouts along the top and bottom, a swipe between styles - Tap any plot for a marker with that moment's level, height over the floor and age - With a Cairn radio: its own channel history, with trace, heat map and 24-hour noise floor MAPS & GPS - Mesh map with standard, satellite and topographic layers, and offline regions - Live traffic layer that draws each packet across the map - Radio and phone GPS side by side, with a compass and a HUD that points to any node TOOLS - Scan & Traffic: each scan lists the nodes your radio hears directly, with Check Link for repeaters, while the map draws packets moving through the mesh - Nodes on Map: pin the scan's nodes, every node you've heard, your contacts or all of them; tap a pin for its page - Wardrive: repeat scans on the move and map where each node was heard - Network Health, Trace Path, Line of Sight with terrain and Fresnel zone, the RX Log and a CLI terminal IN THE CAR & AROUND iOS - CarPlay: Dashboard, Nodes and Chats, with GPS, Spectrum and Scan for Nodes; hear and answer messages with Siri - Siri and Shortcuts: check radio status, send a message or send an advert - Live Activity and Dynamic Island with connection, battery and unread count - An alert if Cairn may have stopped receiving in the background - Multiple windows on iPad MAKE IT YOURS - A color, gradient or photo background with glass cards over it - A photo or a color for any node - Backup and restore, plus CSV and GPX export

Screenshots

MeshCore Update3 screens
CairnOS4 screens

Verdict

The call

The clearest difference is iOS requirement: CairnOS at 18.0 against MeshCore Update's 26.0. On price, rating, review sentiment and ratings volume there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

On the App Store both sit at effectively the same score — 5.0 for MeshCore Update against 5.0 for CairnOS. Both are backed by a comparable volume of ratings — 3 and 2 respectively. Written reviews split almost evenly too, at 100% and 100% positive.

UpkeepUpdate frequency

MeshCore Update ships an update every 4 days, CairnOS every 5 days. The most recent releases landed on October 31, 2026 and November 16, 2026 respectively.

Scorecard1 real difference · 9 level
MeshCore Update versus CairnOS: the parameters behind the verdict, then further details
ParameterMeshCore UpdateCairnOS
PriceFreeFree
Rating5.0 (3 ratings)5.0 (2 ratings)
Positive reviews100.0% of reviews100.0% of reviews
Number of ratings3 — better2
Update frequencyEvery 4 days — betterEvery 5 days
AdsNoNo
In-app purchasesNoNo
MonetizationFreeFree
DevicesiPhoneiPhone, iPad — better
Requires iOS26.018.0 — better
Further details — not scored
Size10 MB60 MB
Age rating4+4+
DeveloperAleksandrs SergejevsChristopher Van Hoose

Customer experience

MeshCore Update

All ratings2 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews1 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

CairnOS

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews2 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

MeshCore Update

No in-app purchases

None

CairnOS

No in-app purchases

Questions

Is MeshCore Update free?
MeshCore Update is free to download, with no in-app purchases.
Is CairnOS free?
CairnOS is free to download, with no in-app purchases.
Which has better reviews, MeshCore Update or CairnOS?
MeshCore Update and CairnOS are both rated 5.0 out of 5 on the App Store, from 3 and 2 ratings respectively.
Do MeshCore Update or CairnOS have ads?
Neither MeshCore Update nor CairnOS shows ads.
Which is updated more often, MeshCore Update or CairnOS?
MeshCore Update ships an update every 4 days, and CairnOS every 5 days. Most recently, MeshCore Update was updated on October 31, 2026 and CairnOS on November 16, 2026.

Other comparisons