MeshCoreScanner vs CairnOS
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
MeshCoreScanner
This app maps LoRa mesh network coverage in real-time by connecting to compatible BLE radio devices. It plots scan points and discovered repeaters on a map, cataloging signal quality and discovery history. Organize scans into sessions and export data for external analysis.
- Live coverage mapping on OpenStreetMap
- Repeater database with discovery history
- Coverage visualization per repeater
- Organized scan sessions
- Background scanning with GPS/BLE
- GeoJSON data export
- Fully offline functionality
Read full descriptionHide full description
MeshCoreScanner is a companion app for MeshCore BLE radio devices that maps LoRa mesh network coverage in real time. Connect to your MeshCore companion radio via Bluetooth Low Energy and start scanning for nearby repeaters as you move. The app automatically triggers discovery scans based on distance traveled or time intervals, logging every repeater response with signal strength, SNR, and GPS coordinates. KEY FEATURES • Live Coverage Mapping — Scan points and discovered repeaters are plotted on an OpenStreetMap-based map as you travel • Repeater Database — All discovered repeaters are cataloged with signal quality, node type, coordinates, and discovery history • Coverage Visualization — View per-repeater coverage areas based on aggregated scan data • Scan Sessions — Organize your scanning activity into sessions for easy comparison and management • Scan-to-Repeater Lines — Tap any scan point to see connections to all repeaters heard at that location • Background Scanning — Continues scanning while the app is in the background using GPS and BLE • Distance or Time Trigger — Configure scans to trigger every X meters or every X seconds • Data Management — Delete repeaters by age or distance, filter imports, manage sessions • GeoJSON Export — Share your coverage data for analysis in external tools • Fully Offline — All data is stored locally on your device, no account or internet connection required REQUIREMENTS • A MeshCore-compatible BLE companion radio device • iPhone with Bluetooth Low Energy support • Location permission for GPS-based scan mapping MeshCoreScanner is built for the MeshCore LoRa mesh networking community. Whether you're planning repeater placement, verifying coverage, or exploring network reach — this app gives you the data you need.
CairnOS
Communicate off-grid using a mesh network of LoRa radios. Send messages, join channels, and track message paths without cell service or internet. Monitor radio status, network activity, and environmental data.
- Off-grid LoRa mesh messaging
- Direct messages and channels
- Message delivery status and retries
- On-device message translation
- Radio dashboard and settings
- Node and repeater management
- Spectrum analysis and charting
Read full descriptionHide full description
CAIRN is a companion app for MeshCore LoRa mesh radios. Pair your radio over Bluetooth or WiFi and send messages through a community-built network of radios and repeaters, with no cell service, no internet and no account. MESSAGING - Direct messages, channels and room servers in one inbox, with filters and favorites on top - Public, private and hashtag channels; share or join a channel by QR code - Delivery status, with retry for failed sends - Emoji reactions, @mentions, forwarding, search and text selection - Every hop of a message's path, on a list and a map - On-device translation of incoming messages - Chats kept on a Cairn touch radio come over to the app when you pair - Block contacts or channel senders, filter keywords and mute conversations - Sign and verify messages with your radio's identity - Optional link previews, with a warning for known malware links DASHBOARD - Battery, chats, nodes nearby, GPS, radio and network at a glance; tap a card for its settings - Your channel live on the Traffic card, in the chart style you pick, with the latest packet under it - Every tool behind one Tools button: Scan & Traffic, Send Advert, Trace Path and more - Sunrise, sunset, uptime and the radio's temperature sensor SETTINGS - One Settings page behind the gear, with search and your radio at the top - Radio presets by region, or set frequency, bandwidth, spreading factor, coding rate and TX power yourself - Front-End LNA and Boosted RX Gain on radios that have them - Firmware updates for nRF52 Cairn radios over Bluetooth, with a log if anything stops NODES & REPEATERS - Saved and heard nodes, with favorites on top, search, sort, filters and a card or list layout - A page for every node, with a map, readings and quick actions - Log in to your repeaters and room servers for status, telemetry, neighbors and an SNR map, and change their settings or use the remote CLI - Send commands to your own companion radios over the mesh (MeshCore 1.18 firmware) - Repeaters and room servers keep time: their clock is set from the phone after an admin login - Telemetry history charts, contact groups, QR sharing and a manual path editor SPECTRUM - Live noise floor, packet traffic, signal margin and airtime on your frequency, moving at the screen's pace - Five chart styles: Modern, Radio Screen, Analyzer, Waterfall and Line Chart, the same on every radio - Full screen like a radio's front panel, readouts along the top and bottom, a swipe between styles - Tap any plot for a marker with that moment's level, height over the floor and age - With a Cairn radio: its own channel history, with trace, heat map and 24-hour noise floor MAPS & GPS - Mesh map with standard, satellite and topographic layers, and offline regions - Live traffic layer that draws each packet across the map - Radio and phone GPS side by side, with a compass and a HUD that points to any node TOOLS - Scan & Traffic: each scan lists the nodes your radio hears directly, with Check Link for repeaters, while the map draws packets moving through the mesh - Nodes on Map: pin the scan's nodes, every node you've heard, your contacts or all of them; tap a pin for its page - Wardrive: repeat scans on the move and map where each node was heard - Network Health, Trace Path, Line of Sight with terrain and Fresnel zone, the RX Log and a CLI terminal IN THE CAR & AROUND iOS - CarPlay: Dashboard, Nodes and Chats, with GPS, Spectrum and Scan for Nodes; hear and answer messages with Siri - Siri and Shortcuts: check radio status, send a message or send an advert - Live Activity and Dynamic Island with connection, battery and unread count - An alert if Cairn may have stopped receiving in the background - Multiple windows on iPad MAKE IT YOURS - A color, gradient or photo background with glass cards over it - A photo or a color for any node - Backup and restore, plus CSV and GPX export
Screenshots
Verdict
The clearest difference is rating: CairnOS at 5.0 against MeshCoreScanner's 4.5. CairnOS also leads on update cadence (every 5 days vs every 6 weeks) and iOS requirement (18.0 vs 26.0). On price, review sentiment, ratings volume and ads there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
CairnOS holds the better App Store score, 5.0 against 4.5. Both are backed by a comparable volume of ratings — 2 and 2 respectively. Written reviews split almost evenly too, at 100% and 100% positive.
MeshCoreScanner ships an update every 6 weeks, CairnOS every 5 days. The most recent releases landed on October 31, 2026 and November 16, 2026 respectively.
| Parameter | MeshCoreScanner | CairnOS |
|---|---|---|
| Price | Free | Free |
| Rating | 4.5 (2 ratings) | 5.0 (2 ratings) — better |
| Positive reviews | 100.0% of reviews | 100.0% of reviews |
| Number of ratings | 2 | 2 |
| Update frequency | Every 6 weeks | Every 5 days — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Free | Free |
| Devices | iPhone, iPad | iPhone, iPad |
| Requires iOS | 26.0 | 18.0 — better |
| Further details — not scored | ||
| Size | 1 MB | 60 MB |
| Age rating | 4+ | 4+ |
| Developer | Jaroslaw Karas | Christopher Van Hoose |
Customer experience
MeshCoreScanner
CairnOS
In-app purchases
MeshCoreScanner
No in-app purchases
CairnOS
No in-app purchases








