iPerf Falcon vs Syscope

iPerf Falcon brings native iPerf testing to iPhone, iPad, and Mac. Measure Wi-Fi, LAN, routers, NAS devices, servers, or broadband to find network bottlenecks. Connect to your chosen endpoint, listen locally, or automate the test over SSH. You control the target and method. Three ways to get started Connect • Enter any iPerf host and port, or choose from 8 free public servers • Check port reachability with one tap; Falcon Pro can also save and pin frequent targets Listen • Turn your iPhone, iPad, or Mac into an iPerf server • Listen on all interfaces or choose an IPv4 address from Wi-Fi, Ethernet, cellular, or VPN • See exactly which address and port the other device should use • Start once and accept multiple client connections until you stop listening; results follow your automatic or manual saving preference SSH (Falcon Pro) • Connect to OpenWrt, Linux, or another SSH device; start the iPerf server, run the test, and clean up automatically • Authenticate with a password, an OpenSSH private key, or no credential on a lab device configured to allow it • Run the server remotely, or listen locally and have the SSH endpoint connect back Professional measurement without the friction • Both iPerf3 and iPerf2 engines, switchable in one place • TCP and UDP with upload and download modes; iPerf3 also supports simultaneous bidirectional tests • A graphical form for direction, protocol, duration, parallel streams, bitrate, and more • Chart-focused results with clear live and average speeds, minimums and peaks, test stages, and elapsed measurement time • Throughput charts label direction, time, and units, follow your bits/s or bytes/s preference, and let you tap to inspect each sample • Open current test details during or after a run to see the connection and full configuration • Separate upload and download speeds, charts, and metrics for bidirectional tests • Live Ping, TCP RTT, retransmissions, UDP jitter, and packet loss • Text details for each measurement interval, plus a searchable parameter and command reference Keep the results that matter • Save every run automatically, or keep only the tests you choose • Add notes, search instantly, and load a saved configuration for your next test • History details share the test screen's readings and layouts, with direction, measured time, averages, extrema, protocol metrics, charts, interval text, and saved parameters and commands • Export individual results as CSV or JSON, or create a shareable result card Falcon Pro One purchase unlocks these features on iPhone, iPad, and Mac: • SSH remote orchestration • Advanced graphical options and iPerf command-line configuration—paste a command to parse and synchronize the graphical form, then save complete commands for quick reuse • Five built-in scenarios for VoIP, 4K streaming, gaming, NAS backup, and Wi-Fi roaming, plus custom presets • Saved targets and SSH endpoints • Charts and metric comparisons for up to 6 runs, plus batch history export Designed for Apple devices On iPhone, landscape keeps readings and run controls visible while charts and details scroll independently. Wide iPad and Mac windows show parameters and results together. On iPhone Duo, layouts adapt to both displays and place content on either side of the fold when space allows, preserving your page, drafts, and current test state. Larger text, light and dark appearances, and nine languages are supported: Simplified Chinese, Traditional Chinese, English, Japanese, Korean, German, French, Spanish, and Russian. On iOS 27 and macOS 27, App Shortcuts can open Speed Test, History, or Settings, or load a saved preset. Privacy first No account is required, and there are no ads or analytics trackers. Test history stays on your device. SSH passwords and private keys are stored only in the system Keychain. Test traffic goes only to the target you choose; the target list briefly checks port reachability.

Measure real speeds on your own network with iPerf3. Run upload and download tests between your iPhone or iPad and a Mac, PC, NAS, or another device running iPerf3 on your local network — or turn Syscope into an iPerf3 server and pair with a QR code. Is it the Wi-Fi or the internet? Did moving closer to the router make a difference? Syscope also brings device information and network checks together, so CPU, memory, storage, DNS, and connection details are all in one place. INCLUDED FOR FREE • Live CPU, memory, storage, battery, and thermal information, with device-wide and Syscope-specific readings clearly labeled. • A one-hour view of locally recorded metric history. • Connection details, local IP addresses, DNS lookup, and TCP connection checks. • A quick health check that pings your router, then checks DNS and HTTPS, to show whether a problem is more likely on your Wi-Fi or beyond it. Includes a shareable summary. • Bonjour discovery and manual iPerf3 server entry. • TCP upload and download tests: 10 seconds, one stream. • Foreground iPerf3 server mode and QR-code pairing on a local network. • A one-time Wi-Fi reading through an optional Shortcut, with suggestions for weak signal, low signal-to-noise ratio, or an older Wi-Fi standard. On supported iPhone and iPad models, it also tells you when enabling 160 MHz on your router could raise the link rate. • Widgets for quick access. SYSCOPE PRO — ONE-TIME PURCHASE • 24-hour and 7-day history views, configurable local retention, and metric export. • Repeated DNS measurements and detailed HTTPS connection timings. • UDP tests, parallel streams, custom duration or transfer size, and on-demand local-subnet discovery on a single TCP port. • Latency under load: Syscope pings your router before and during each iPerf3 test to reveal bufferbloat, the queueing delay that makes calls and games stutter. • Saved tests, labels, reusable profiles, reruns, and side-by-side comparisons. • Room-by-room comparison: tag each test with a location to compare speed, Wi-Fi signal, and latency across your home or office. • Continuous Wi-Fi readings and charts through the optional Shortcut. • PDF, JSON, and CSV test reports. Network identifiers are hidden by default. Pro is an optional, non-consumable in-app purchase, not a subscription. See the app for your local price. Restore purchases with the Apple Account used for the purchase. YOUR DATA STAYS WITH YOU No account, ads, or tracking. The Syscope developer does not collect your personal data. Metrics and saved tests are processed and stored on your device unless you choose to export or share them. Network diagnostics send traffic to the target you choose, which can see your source IP. Purchases are handled by Apple. Optional Wi-Fi name access may require iOS location permission; Syscope does not read or save location coordinates. BEFORE YOU TEST iPerf3 requires a reachable compatible server, such as another device on your network. Syscope does not provide a public speed-test server network. Throughput tests can use substantial traffic; cellular testing is disabled by default. Server mode runs only in the foreground on Wi-Fi or a wired local network. Syscope does not list other apps or show their individual memory use. It records metrics while in the foreground, not as an always-on background monitor. Requires iOS 17 or later. Available for iPhone and iPad, in English and Traditional Chinese.