OpenOBD vs Tachwire
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
OpenOBD
Transform your iPhone into a real-time car dashboard. Connect an OBD2 adapter to monitor live engine data, track your trips with GPS, and diagnose fault codes with clear explanations. Explore all features in demo mode without hardware.
- Live engine data monitoring
- Real-time speed, RPM, temperature gauges
- Trip logging with GPS mapping
- Read and clear diagnostic trouble codes (DTCs)
- Vehicle information display
- Demo mode for exploration
Read full descriptionHide full description
OpenOBD turns your iPhone into a real-time car dashboard. Connect any ELM327 OBD2 adapter (Bluetooth or Wi-Fi) and see what your car is really doing — live. LIVE ENGINE DATA • Speed, RPM, coolant temperature, intake, throttle, engine load, battery voltage and more • 50+ sensors with gauges you pick and reorder yourself • Instant and average fuel consumption • Tap any gauge for a live 60-second chart CARPLAY • A live 8-tile dashboard on your car's built-in screen • Start and stop trip recording without touching your phone DIAGNOSTICS • Read and clear fault codes (DTCs) with plain-language explanations • For common codes: what it means, how urgent it is, what to do next • Emissions readiness monitors before an inspection • Freeze frame — the sensor values from the moment the fault occurred • Vehicle info: VIN, fuel type, supported sensors TRIP LOGGING • Automatically record your drives with the GPS route on a map • Keeps recording in the background, even with the screen locked • Distance, duration, speed and fuel for every trip • Export any trip as CSV or GPX CAR HEALTH TOOLS • Battery and charging test: state of charge, alternator and cranking check • Diesel and DPF pre-check from standard, read-only OBD evidence • Used car check before you buy • Measure 0-100 km/h acceleration and 100-0 km/h braking • Live alerts for overheating and low voltage, in plain language BUILT FOR DRIVERS • Beautiful dark interface designed for the car • Over 40 languages, metric and imperial units • Works with affordable ELM327 adapters — no subscription, no account, no ads • Your data stays on your phone TRY IT WITHOUT HARDWARE • Tap Connect, then Demo Mode, to explore every feature with simulated live data OpenOBD is not affiliated with any car manufacturer. An OBD2 adapter (sold separately) is required to read data from your vehicle. Most petrol cars built after 2001 and diesels after 2004 are supported. The battery, diesel and used-car results are read-only pre-checks and do not replace a professional inspection.
Tachwire
This app displays real-time car data like temperatures, boost, and battery levels on your car's screen. It offers customizable layouts, drive logging, and alerts for critical conditions. It also provides speed camera warnings and track guidance for driving enthusiasts.
- Live OBD data display
- Customizable screen layouts
- Drive logging and analysis
- Speed and red-light camera alerts
- Track guidance and lap timing
- Support for various car makes
Read full descriptionHide full description
Tachwire reads your car through a Bluetooth LE OBD adapter and puts what the dashboard keeps to itself — oil and gearbox temperatures, boost, gear, a hybrid's battery, on a BMW even oil pressure — on the car's screen, laid out the way you want. When something runs critically hot, it says so out loud. A SCREEN OF YOUR OWN IN THE CAR • Tiles of any size on a grid fitted to your car's display. • Pages for the road, the track and the warm-up, a button apart. • Arrange it on the phone, start from a layout in the Gallery, or edit on the car's screen while parked. • A Live Activity on the Lock Screen, in the Dynamic Island and, on iOS 26, in CarPlay. YOUR CAR AND YOUR DRIVES • Car: your car pictured in its factory colour; tank, battery, tyres and the last drive at a glance. • Drives: a diary by day — city, highway or track, with alerts, pulls and records. • A drive's page: the route, a verdict with its reason, every reading on one time line. • Logbook: records and trends against your car's own usual; ignition timing pull and power by rpm. • Power from the torque the engine reports, never estimated. 0–60 mph or 0–100 km/h, ¼ and ½ mile, timed from the car's speed — on a closed track only. ROAD CAMERAS • Spoken alerts and a map window on the car's screen for speed and red-light cameras, section controls and low-emission zones in Spain, Portugal, Italy, the United Kingdom, Poland, Austria, Belgium, Bulgaria, Norway, the Netherlands, Czechia, Cyprus, Malaysia and Russia. France: danger zones and low-emission zones only, as French law allows. Silent where such alerts are banned. • Off until you turn it on. TRACKS • 535 tracks in 17 countries, or set your own start/finish line. • Laps by session and the gap to your best, on the car's screen too. Runs and laps only on a closed track. • Track guidance in CarPlay: on a circuit, the track map with the next turn, and your braking points once a lap is recorded. A Track map tile for any page. WHICH CARS • BMW, the deepest: G-series from 2018 and F-series, recognised from the VIN — oil temperature and pressure, gearbox temperature and gear, boost, torque and power, a plug-in hybrid's e-motor and battery, a diesel's DPF and AdBlue. • MINI (2014–2024) and the Toyota GR Supra are read the way a BMW is. • First support, readings vary by model: Mercedes-Benz, Porsche, Ford, Toyota and Lexus, RAM, Dodge, Jeep, Chrysler, Land Rover, Jaguar, Audi, Volkswagen, SEAT, CUPRA, Mazda and Honda. Renault, Dacia and Alpine are recognised. • Any other car with an OBD port: revs, speed, coolant, intake, load, often oil temperature and boost. A tile stays empty rather than show a wrong number. Make by make: tachwire.app/cars. WHAT YOU NEED • A Bluetooth LE OBD adapter: OBDLink CX (the fastest), vLinker, UniCarScan, or an ELM327 BLE clone (slower). Classic Bluetooth and Wi-Fi adapters can't connect to an iPhone. • iOS 18.4 or later and CarPlay, wired or wireless: the app reads the car only while CarPlay is connected. • No adapter yet? Choose "No adapter yet" on the first screen: which one to get, and a demo drive. READ-ONLY, PRIVATE Tachwire only reads live values: no fault codes, no coding, nothing changed in the car. No account, ads or tracking. Drives stay on the phone unless you turn sending on (encrypted, route removed; only laps on a track keep their positions). Crash reports turn off with one switch; usage data only if you agree. GPS runs only during a drive. SUPPORT TACHWIRE Everything in the app is free. Monthly coffee and Monthly burger are optional monthly subscriptions, a thank-you to the developer, with car looks: a playful picture for the Car card and your pick of its trim and colour; every figure stays your car's. Auto-renews monthly; cancel in Apple Account settings at least 24 hours before renewal. Terms of Use: tachwire.app/terms. Privacy Policy: tachwire.app/privacy. Tachwire is independent and not affiliated with or endorsed by any carmaker. All trademarks belong to their owners.
Screenshots
Verdict
The clearest difference is monetization model: OpenOBD at free against Tachwire's free with in-app purchases. OpenOBD also leads on ratings volume (5 vs 1) and iOS requirement (16.4 vs 18.4). Tachwire's advantage is rating (5.0 vs 4.8) and update cadence (every 3 days vs weekly). On price, review sentiment, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. OpenOBD sells 1 one-off in-app purchase and Tachwire sells 2 in-app purchases, starting at $2.99 per month. Whichever you choose, the download price is not the number that matters.
Tachwire holds the better App Store score, 5.0 against 4.8. That said, the two scores are not equally well evidenced: OpenOBD has 5 ratings behind it against 1, so its average is the more settled of the two. Written reviews split almost evenly too, at 100% and 100% positive.
OpenOBD ships an update weekly, Tachwire every 3 days. The most recent releases landed on November 17, 2026 and November 16, 2026 respectively.
| Parameter | OpenOBD | Tachwire |
|---|---|---|
| Price | Free | Free |
| Rating | 4.8 (5 ratings) | 5.0 (1 ratings) — better |
| Positive reviews | 100.0% of reviews | 100.0% of reviews |
| Number of ratings | 5 — better | 1 |
| Update frequency | Weekly | Every 3 days — better |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Monetization | Free — better | Free with in-app purchases |
| Devices | iPhone, iPad — better | iPhone |
| Requires iOS | 16.4 — better | 18.4 |
| Further details — not scored | ||
| Size | 80 MB | 202 MB |
| Age rating | 4+ | 4+ |
| Developer | Osman Cengeri | Maksim Pogozhii |
Customer experience
OpenOBD
Tachwire
In-app purchases
OpenOBD
- Founder Pack$4.99
Tachwire
- Monthly coffee$2.991 Month
- Monthly burger$9.991 Month









