Strelok Internal Ballistics vs FieldSolve

Strelok Internal Ballistics is the mobile Quick Load: an interior-ballistics workbench for precision handloaders. It's the load-development companion to Strelok Pro — Pro solves the bullet in flight, this app helps you build the cartridge, and predicts what that cartridge will actually do before you ever pull the trigger. PREDICT YOUR LOAD — ON DEVICE - Pick a cartridge, powder and bullet, and the engine predicts muzzle velocity, peak chamber pressure and case fill across the whole charge range. - A live chart plots velocity and pressure against the SAAMI/CIP maximum, with a clear over-pressure warning zone. - The engine is fit to 34,000+ published loads and runs entirely on your device — no signal needed at the bench. CALIBRATE IT TO YOUR RIFLE - Enter the velocities you actually chronographed and the engine tunes itself to your barrel and powder lot, so every prediction is personalized — not a generic table. LOAD LAB — YOUR DATA, SMARTER - Find your velocity node (the flat spot / OCW window) and your lowest-spread charge automatically. - Track powder temperature sensitivity (fps/degF) and barrel round-count and life. - The more you log, the sharper your load development gets. A REFERENCE THAT WORKS OFFLINE - 34,000+ published loads across 519 cartridges and 100+ powders, normalized from Hodgdon, Vihtavuori, Alliant and Norma data. - Browse by cartridge, then filter by bullet weight and powder — start/max charge, velocity, pressure and COAL, with SAAMI/CIP context. The whole catalog lives on your device. A SMARTER LOGBOOK - Record loads with full component detail and chronograph strings. - Automatic statistics: average velocity, standard deviation (SD) and extreme spread (ES). - Track rifle profiles and your powder, primer, brass and bullet inventory. PART OF THE STRELOK ECOSYSTEM - One Strelok account works here and in Strelok Pro. - Develop a load here, then send it to Strelok Pro with its measured muzzle velocity (Rifles > Import from Reload on the Pro side). - Strelok Cloud keeps your logbook, rifles and developed loads in sync across devices. BUILT FOR SAFETY Predictions are a development aid, not published load data. The app always shows the start charge, clamps and warns against SAAMI/CIP maximum, and reminds you to start low and work up while watching for pressure signs. Always cross-check against your component manufacturer's current data. This app is not a maximum-charge authority — you are responsible for safe reloading practice. FREE & PRO Free: browse the full catalog, keep your logbook, and run the prediction engine. Pro adds chrono calibration and Load Lab analytics — monthly or yearly subscription (7-day free trial), or a one-time Lifetime purchase. Subscriptions auto-renew unless cancelled at least 24 hours before the period ends; manage or cancel anytime in your App Store account settings. Terms of Service: https://strelokpro.com/terms Terms of Use (EULA): https://strelokpro.com/eula Privacy Policy: https://strelokpro.com/privacy

FieldSolve is a fast, accurate ballistic calculator built for long range shooters, hunters, and precision rifle competitors who need a firing solution they can trust on the first shot. Enter your rifle, load, and conditions and FieldSolve solves the full trajectory — bullet drop, windage, and the exact hold or dial in MOA or mils. BALLISTIC SOLVER A precision ballistic engine that accounts for muzzle velocity, ballistic coefficient (G1/G7), zero range, sight height, shooting angle, spin drift, aerodynamic jump, and Coriolis. Get your holdover and windage instantly, as a dialed solution or a reticle hold. BUILT FOR THE FIELD Save unlimited rifle and load profiles. Build range cards and DOPE charts for every distance. A clean heads-up display gives you the numbers you need at a glance, even on the clock. LIVE ENVIRONMENTAL DATA Wind, temperature, pressure, humidity, and density altitude all change your solution. Enter them by hand, or connect a weather meter to pull live atmospherics straight into your solve. Connect an anti-cant level to read your rifle's true cant, and import muzzle velocity directly from your chronograph so your data is real, not estimated. RECORD YOURSELF SHOOTING FieldSolve records video of your shot with a live data overlay — your solution, wind, cant, and velocity burned right onto the clip. Review your form, confirm your DOPE, and share your best shots. FEATURES - Advanced ballistic solver with G1 and G7 drag models - Bullet drop, windage, and lead in MOA, mils, or clicks - Spin drift, aerodynamic jump, and Coriolis - Unlimited rifle and load profiles - Range cards and DOPE charts - Angle (cosine) and cant correction - Metric and imperial units - Live weather, level, and chronograph integration - Video recording with data overlay FieldSolve is a free ballistic calculator. Whether you shoot PRS, NRL, F-class, or hunt at distance, it gives you a firing solution you can rely on. Always follow safe shooting practices and know your target and what lies beyond it. Ballistic solutions are calculated estimates; confirm your come-ups on paper before relying on them in the field.