Wifi Rig CTRL vs N6YYO Remote Base
Price, ratings, monetisation and update history for both apps, side by side โ with what reviewers say about each.
Wifi Rig CTRL
Read full descriptionHide full description
WifiRigCTRL is an iPhone / iPad app for remotely operating your amateur-radio transceiver via a Raspberry Pi or ICOM CI-V (Wi-Fi / Bluetooth). Features: - Real-time RX frequency, mode and S-meter display - Change frequency, mode, power, squelch and filter width - RX audio playback through the speaker (with noise reduction) - PTT on/off and microphone transmit - CW Morse send and receive-decode (BLE / USB-NCM keyers) - RTTY AFSK transmit/receive (on-device software modem or via the Raspberry Pi's minimodem, with spectrum display) - FT8 / FT4 receive-decode and transmit - Automatic FT8 all-decode log to ~/ALL.TXT (WSJT-X compatible) - Band Scope (CAT single-sweep / native ICOM CI-V scope, with POTA/SOTA spots overlaid) - APRS beacon transmit (GPS) - QSO log (ADIF export, POTA/SOTA references) - Operating-location (JCC/JGC, grid) registration and operating sessions - eQSL auto-upload, Smart Ham Log integration, PSKReporter spotting - Band memory, POTA/SOTA spot integration (SP2ALART) - Multiple profiles, API-key auth, WireGuard VPN - Direct Wi-Fi / Bluetooth CI-V to Icom IC-705 / IC-9700 - One-tap Raspberry Pi SSH setup โ Requirements (Important) This app does not work on its own. You need one of the following, owned by you: A Raspberry Pi Zero 2W that is already set up (connected to your radio, with Hamlib/FastAPI installed), or An IC-705 or IC-9700 (for a direct CI-V connection) Connect either one to the same Wi-Fi network as your iPhone. Setup instructions and firmware for the Raspberry Pi are available on GitHub: https://github.com/ji1ore/M5CoreHamCAT โ Intended Users This app is for licensed amateur radio operators who have a compatible radio setup. *This app contains no ads and no usage tracking. All data it collects is used only on your device and is never sent to an external server.
N6YYO Remote Base
Read full descriptionHide full description
N6YYO Remote Base puts your amateur radio station in your pocket. Your station computer stays next to your radio; the app connects to it over the internet or your home network, so you can listen, tune and transmit from wherever you are. LISTEN AND SEE THE BAND - Live receive audio from your radio, with volume and mute - A live waterfall of the band: tap or drag to tune, with DX spot markers - S-meter, and power, SWR and ALC while you transmit - Main and sub receiver on radios that have one TUNE AND OPERATE - Frequency dial, step buttons, typed frequencies and band shortcuts - Mode and filter from your radio's own list, including FT8 and FT4 - Split with offsets, RIT and XIT, and scan - Transmit tools: antenna tune, CW memories, voice memories and VOX TRANSMIT WITH PTT - Hold to talk, or tap on and tap off - On iPhone and iPad, PTT works from the system Push to Talk control - Play back your last transmission to hear exactly what went out - Built-in safety: every transmission is limited to 120 seconds, and the station unkeys by itself if the connection drops LOG AND CHASE DX - A full logbook that follows the radio's frequency and mode - DX cluster spots: tap a spot to tune to it and log the contact - FT8 and FT4 decodes on stations with WSJT-X's decoder - QSL services and award progress - Rotator and amplifier panels for stations that have them - Tune amp: one press tunes an SPE Expert amplifier's tuner, with each step and the SWR shown, and the same button stops it YOUR STATION, YOUR ACCOUNTS - Pair a device by scanning the code your station shows, or sign in with your callsign and password - Approve a new device from one where you are already signed in - No accounts with us, no ads, no tracking TRY IT WITHOUT A RADIO Tap "Try the demo station" on the sign-in screen to use a demo station with a simulated radio. Nothing you do on it reaches the air. N6YYO Remote Base needs the N6YYO Remote Base station software running on the computer connected to your radio. Transmitting requires an amateur radio license. For help setting up a station, see the support page.
Screenshots
Verdict
The clearest difference is update cadence: Wifi Rig CTRL at daily against N6YYO Remote Base's every 3 days. On price, ads, in-app purchases and device support there is nothing between them.
Scored on Price ยท Rating ยท Positive reviews ยท Number of ratings ยท Update frequency ยท Ad data ยท In-app purchases ยท Monetization ยท Best chart rank ยท Devices ยท Requires iOS
Both are free to download. Neither carries in-app purchases, so what you see is what you pay.
Wifi Rig CTRL ships an update daily, N6YYO Remote Base every 3 days. The most recent releases landed on November 18, 2026 and November 10, 2026 respectively.
| Parameter | Wifi Rig CTRL | N6YYO Remote Base |
|---|---|---|
| Price | Free | Free |
| Update frequency | Daily โ better | Every 3 days |
| Ad data | No | No |
| In-app purchases | No | No |
| Devices | iPhone, iPad | iPhone, iPad, Mac โ better |
| Requires iOS | 17.0 | 17.0 |
| Further details โ not scored | ||
| Size | 16 MB | 6 MB |
| Age rating | 4+ | 4+ |
| Developer | JIRO UENO | Leo Lebel |
In-app purchases
Wifi Rig CTRL
No in-app purchases
N6YYO Remote Base
No in-app purchases





