Stud Finder App vs SwitchPilot for Wemo
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Stud Finder App
This tool uses your phone's magnetometer to detect metal objects within walls, such as nails, screws, pipes, and rebar. It offers different modes for finding studs or larger metal objects and can even overlay stud locations on your camera view in augmented reality.
- Magnetometer-based stud and metal detection
- Multiple scan modes (Stud, Metal, Deep Scan Pro)
- Augmented reality wall view (Pro)
- Haptic and sound alerts
- Live field strength readings
- Calibration to your environment
- Save and review past scans
Read full descriptionHide full description
Find the stud before you drill. Stud Finder turns your iPhone's built-in magnetometer into a magnetic stud finder. It picks up the steel nails and screws that hold drywall to the studs, and warns you about the pipes, rebar and conduit you don't want to hit. Lay your phone flat on the wall, let it calibrate, then slide it slowly. The gauge climbs as you get closer to metal, and the scanner lights up, beeps and buzzes when it finds something. THREE SCAN MODES Stud Mode: Tuned for the small, brief signal of a nail or screw. Follow the line of fasteners to find the stud. Metal Mode: Less sensitive, so only larger metal like pipes, plates and steel studs stands out. A line of nails won't set it off, so you can tell a fastener from a pipe. Deep Scan (Pro): The most sensitive mode, for fasteners set deeper in the wall that Stud Mode can pass right over. WALL VIEW (PRO) Found one stud? Point your camera at the wall and Wall View draws a line on it in AR, then marks where the next studs should be at your stud spacing: 16 or 24 inches, or 40 or 60 cm. Slide your phone onto a predicted line to check it, and tap to confirm. Predicted lines are estimates. Doubled studs around doors, windows and corners can break the pattern, so check each one with the scanner before you drill. FEATURES • Calibrates against your own wall, so readings fit the room • Live field strength in microtesla (µT) or milligauss (mG) • Low, normal and high sensitivity • Haptic and sound alerts: one beep for a possible stud, three for metal • Save scans and look back at them later • Keep the screen awake while you scan • A step-by-step guide that walks you through hanging a shelf, from the first stud to the last screw • Available in 13 languages FREE AND PRO Stud Mode, Metal Mode and calibration are free. The free plan includes 3 scans of up to a minute each. After that, watch a short ad for another scan, as often as you like. You can keep up to 5 saved scans. Stud Finder Pro adds: • Deep Scan • Wall View • Unlimited scans with no time limit and no ads • Unlimited saved scans If your plan starts with a free trial, we'll remind you two days before it ends. HOW IT WORKS, AND WHAT IT CAN'T DO We want you to know exactly what you're getting. Your phone's magnetometer senses magnetic fields, so it detects ferrous metal: steel nails, screws, pipes, rebar and conduit. Wood isn't magnetic, and no phone can detect it directly. Stud Finder finds studs the way a magnetic stud finder does, by finding the metal fasteners holding them in place. That's why the app reports what it finds by signal strength instead of claiming to identify materials. If a reading in Stud Mode is unusually strong, it tells you it's likely metal rather than a stud. Results depend on your device's magnetometer, the wall material and how deep the metal is. Detection is less reliable through thick plaster, tile, concrete or metal lath. Always check before you drill, and never rely on any app alone where there may be electrical wiring or plumbing. SUBSCRIPTIONS Payment is charged to your Apple ID when you confirm your purchase. Subscriptions renew automatically unless cancelled at least 24 hours before the end of the current period. You can manage or cancel them in your App Store account settings. PRIVACY Your saved scans are stored on your device. Privacy Policy: https://redizeuz.com/privacy Terms of Use: https://redizeuz.com/terms
SwitchPilot for Wemo
Control your existing smart plugs and switches directly over your home Wi-Fi without needing a cloud account. This app allows you to manage devices locally, set schedules, and organize them into groups for convenient control, even if your internet is down.
- Local Wi-Fi control
- No cloud account required
- Discover devices automatically
- Organize devices into groups
- Create on/off schedules
- Rename supported devices
Read full descriptionHide full description
SwitchPilot brings local control to compatible Wemo and Kasa plugs, switches, and dimmers. On supported Wemo devices, create schedules, auto-off timers, motion rules, long-press actions, and scheduled restarts that run on the devices themselves, even when the app is closed or your phone is away. Built after Wemo's smart-home cloud was discontinued, SwitchPilot exists for a simple reason: the hardware on your walls still works. The service behind it went away, but the silicon didn't. WHY SWITCHPILOT • Direct connections. Wemo and Kasa commands travel over your home Wi-Fi instead of making a cloud round-trip. Local switching works during an internet outage while your Wi-Fi remains running. • One place to manage rules. Create, edit, enable, disable, and delete supported routines from the Rules tab. • No SwitchPilot account required. Discover compatible devices and start using them without registering for another service. WHAT YOU CAN DO Create five types of local rules on supported Wemo devices: • Schedules. Turn devices on or off at chosen times and on selected days. • Auto-off. Turn a device off after a chosen duration. Give a hot-water recirculator a five-minute timer or keep a light from staying on all night. • Motion. Turn on compatible Wemo devices when a Wemo Motion sensor detects movement, with optional shutoff after motion stops. • Long-press automations. Hold a supported Wemo wall switch to control other Wemo devices. Switch several lights together from one physical button. • Restart. Schedule equipment to turn off briefly and back on automatically. Give a Wi-Fi router or streaming box a regular restart. Schedules are also supported on compatible Kasa devices. You can also: • Discover devices automatically or add one manually by IP address. • Refresh devices to check their reported state. • Organize switches into groups such as Living Room or Outdoor, and control a whole group at once. • Rename supported devices, reorder groups, and collapse sections to keep your dashboard tidy. • Arrange your most-used switches in Favorites. That order follows you to Apple Watch and Favorites widgets. • Switch Wemos from Apple Watch. Browse Favorites or switches by room; your nearby iPhone handles the connection, even when locked. • See Wemo status in Home Screen, Lock Screen, and StandBy widgets. On iOS 17 or later, tap a Home Screen tile to switch it. • Use Siri and Shortcuts to turn supported switches on or off, toggle them, or get their state, including while SwitchPilot is closed. • Retrieve a compatible Wemo's setup code and add it to Apple Home. • Control supported Cync lights. • See live switch updates and your current Wi-Fi network on the Dashboard. • Choose whether SwitchPilot opens on Dashboard or Favorites. • Use SwitchPilot on a Mac with Apple silicon. PRIVACY BY DESIGN Device names, groups, and your home layout are stored on your phone. Cync support is optional and uses a Cync account, GE's service, and an internet connection. WHO IT'S FOR • People who've moved newer gear to another ecosystem but still have older Wemo or Kasa devices to manage. • Households with switches spread across several rooms and routines to manage together. • Anyone adding automation to existing lights, pumps, fans, or other switched equipment. Keep your switches. Keep your routines. Keep control. COMPATIBILITY Supported device families include Wemo and Kasa smart plugs, switches, and dimmers, plus Cync lights. Device and rule availability vary by model. SwitchPilot is independent and is not affiliated with, endorsed by, sponsored by, approved by, or officially supported by Belkin, Wemo, TP-Link, Kasa, GE, or Cync. These names identify compatible device families and do not imply a partnership. All trademarks belong to their respective owners.
Screenshots
Verdict
The clearest difference is rating: SwitchPilot for Wemo at 4.9 against Stud Finder App's 3.8. SwitchPilot for Wemo also leads on in-app purchases (none vs 2) and ads (none vs shown). On price, device support and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Stud Finder App sells 2 in-app purchases, starting at $9.99 per year. SwitchPilot for Wemo asks for nothing beyond the download.
SwitchPilot for Wemo holds the better App Store score, 4.9 against 3.8. That said, the two scores are not equally well evidenced: SwitchPilot for Wemo has 67 ratings behind it against 6, so its average is the more settled of the two. Written reviews point the same way: 80% of Stud Finder App's written reviews are positive against 100% of SwitchPilot for Wemo's.
Stud Finder App ships an update every 2 months, SwitchPilot for Wemo every 8 days. The most recent releases landed on November 15, 2026 and November 18, 2026 respectively.
| Parameter | Stud Finder App | SwitchPilot for Wemo |
|---|---|---|
| Price | Free | Free |
| Rating | 3.8 (6 ratings) | 4.9 (67 ratings) — better |
| Positive reviews | 80.0% of reviews | 100.0% of reviews — better |
| Number of ratings | 6 | 67 — better |
| Update frequency | Every 2 months | Every 8 days — better |
| Ads | Yes | No — better |
| In-app purchases | Yes | No — better |
| Monetization | Free with in-app purchases | Free — better |
| Devices | iPhone, iPad | iPhone, Apple Watch |
| Requires iOS | 17.6 | 17.0 — better |
| Further details — not scored | ||
| Size | 20 MB | 118 MB |
| Age rating | 4+ | 4+ |
| Developer | Ebenezer Oteng | Vadim Snitkovsky |
Customer experience
Stud Finder App
SwitchPilot for Wemo
In-app purchases
Stud Finder App
- Yearly$9.991 Year
- Lifetime$7.99
SwitchPilot for Wemo
No in-app purchases
Questions
Is Stud Finder App free?
Is SwitchPilot for Wemo free?
Which has better reviews, Stud Finder App or SwitchPilot for Wemo?
Do Stud Finder App or SwitchPilot for Wemo have ads?
Which is updated more often, Stud Finder App or SwitchPilot for Wemo?
Other comparisons















