Cut List Optimizer vs FINOpti
Price, ratings, monetisation and update history for both apps, side by side ā with what reviewers say about each.
Cut List Optimizer
Read full descriptionHide full description
SawKit works out how to cut your parts from sheets of plywood, MDF or melamine ā and timber, battens and tube from the lengths you buy ā with the least waste. Then it walks you through the cuts at the saw, one at a time. Type your cut list the way you'd say it. 15 3/16. 3/4". 4' 6". Millimetres if that's your shop. A unit written on a number always wins, so imported hardware drops into a metric project without doing sums. WHAT IT DOES ⢠Lays out sheets. It tries twelve packing strategies on your list and keeps the best, across as many sheets as it takes ā and says how many sheets to buy, or how many more you need. ⢠Lays out lengths. Rails, legs and battens are cut from your bar lengths, with the offcut shown on each bar. ⢠Respects the grain. Give a part a material with grain and it follows that grain on its own. Set it by hand wherever you want. ⢠Accounts for the blade. Kerf and edge trim are part of the calculation, and you can change them right in the project. ⢠Takes you to the saw. One cut at a time, both sides of the blade in big figures, each cut ticked off and grayed on the drawing. The screen stays on. ⢠Cuts the way a saw cuts. Every cut runs edge to edge across the piece in your hands ā never one that stops halfway. ⢠Prints. A page per sheet and per set of bars, plus a shopping list with prices and a total ā to mark off as you work. ⢠Runs on iPhone, iPad and Mac. On the iPhone it works on its side too. ⢠Works with no signal at all. Workshops are usually the worst room in the building for that. FREE The whole calculation, the drawings for sheets and bars, the saw screen and the shop calculators. Up to 25 parts, three projects, one kind of sheet and one kind of bar. PRO (one payment, no subscription) Unlimited parts, projects and stock, with several materials in one project. PDF export and printing. The cut order on the drawing. Edge banding edge by edge: parts cut to size, banding counted and priced. Offcuts kept in your library and used first next time. Your own stock list with prices. Your projects on every device you own through iCloud, kept in step as you work. SHOP CALCULATORS ā always free Board feet with cost. Purchase allowance, done properly: waste comes out of what you buy, not what you need, so 15% waste means buying about 18% more ā not 15%. Project cost with markup. PRIVACY Nothing is collected. No account, no analytics, no tracking. Your cut lists stay on your devices and in your own iCloud.
FINOpti
Read full descriptionHide full description
FINOpti turns your cut list into an optimized cutting plan in seconds ā so you get more parts from every sheet, waste less material, and cut with confidence. Built for carpenters, joiners, and cabinet makers working with plywood, MDF, melamine, and veneered panels. ENTER A JOB IN SECONDS ⢠Type panels on a big, glove-friendly keypad, or paste a cut list and let it fill the table. ⢠Set your stock sheets, saw kerf, grain direction, and edge banding. GET AN OPTIMIZED PLAN ⢠The on-device engine nests your parts to maximize yield and minimize offcuts. ⢠See every sheet laid out, with utilization, sheet count, and estimated cost. CUT WITH CONFIDENCE ⢠Cutting Mode guides you through the cuts one at a time, with the exact fence dimension for each ā tap to mark each cut done. ⢠The plan respects kerf and grain, so what you see is what you cut. STAY ORGANIZED ⢠Save jobs and reopen their plans anytime. ⢠Track material stock and get a heads-up before you run low. ⢠Bank your offcuts and reuse them on future jobs. EVERY FEATURE INCLUDED ā FREE No subscription, no unlocks, nothing held back: ⢠Defect zones ā mark knots and damage; parts are placed around them. ⢠Move parts ā drag a part; every move snaps to a cut the saw can make. ⢠Rotate sheet ā re-pack any sheet the other way with one tap. ⢠Client quote ā export a clean, professional quote PDF for your customer. PRIVATE BY DESIGN ⢠Works offline ā no account, no sign-in, and we never ask for your name, email or phone. Nothing you enter ever leaves your phone. ⢠Your jobs, materials, and offcuts stay on your device. ⢠FINOpti is free and supported by a few clearly-marked sponsored cards on the Home, Jobs, and Inventory screens ā never while you're cutting. They are not personalised and you are not tracked. ⢠Available in English and Albanian, in millimetres, centimetres, or inches. Cut smarter. Waste less. ā Privacy Policy: https://finopti.net/privacy
Screenshots
Verdict
The clearest difference is in-app purchases: FINOpti at none against Cut List Optimizer's 1. FINOpti also leads on update cadence (every 9 days vs every 3 weeks) and iOS requirement (16.0 vs 26.0). Cut List Optimizer's advantage is device support (3 vs 1). On price and ads there is nothing between them.
Scored on Price Ā· Rating Ā· Positive reviews Ā· Number of ratings Ā· Update frequency Ā· Ad data Ā· In-app purchases Ā· Monetization Ā· Best chart rank Ā· Devices Ā· Requires iOS
Both are free to download. Cut List Optimizer sells 1 one-off in-app purchase. FINOpti asks for nothing beyond the download.
Cut List Optimizer ships an update every 3 weeks, FINOpti every 9 days. Both last shipped on November 18, 2026.
| Parameter | Cut List Optimizer | FINOpti |
|---|---|---|
| Price | Free | Free |
| Update frequency | Every 3 weeks | Every 9 days ā better |
| Ad data | No | No |
| In-app purchases | Yes | No ā better |
| Devices | iPhone, iPad, Mac ā better | iPhone |
| Requires iOS | 26.0 | 16.0 ā better |
| Further details ā not scored | ||
| Size | 8 MB | 5 MB |
| Age rating | 4+ | 4+ |
| Developer | Armen Ter-Oganezov | BLENDI YMERI |
In-app purchases
Cut List Optimizer
- SawKit Pro$24.99
FINOpti
No in-app purchases
Questions
Is Cut List Optimizer free?
Is FINOpti free?
Do Cut List Optimizer or FINOpti have ads?
Which is updated more often, Cut List Optimizer or FINOpti?
Other comparisons















