Cut List Optimizer vs Kesim
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Cut List Optimizer
Read full descriptionHide full description
SawKit works out how to cut your parts from sheets of plywood, MDF or melamine — and timber, battens and tube from the lengths you buy — with the least waste. Then it walks you through the cuts at the saw, one at a time. Type your cut list the way you'd say it. 15 3/16. 3/4". 4' 6". Millimetres if that's your shop. A unit written on a number always wins, so imported hardware drops into a metric project without doing sums. WHAT IT DOES • Lays out sheets. It tries twelve packing strategies on your list and keeps the best, across as many sheets as it takes — and says how many sheets to buy, or how many more you need. • Lays out lengths. Rails, legs and battens are cut from your bar lengths, with the offcut shown on each bar. • Respects the grain. Give a part a material with grain and it follows that grain on its own. Set it by hand wherever you want. • Accounts for the blade. Kerf and edge trim are part of the calculation, and you can change them right in the project. • Takes you to the saw. One cut at a time, both sides of the blade in big figures, each cut ticked off and grayed on the drawing. The screen stays on. • Cuts the way a saw cuts. Every cut runs edge to edge across the piece in your hands — never one that stops halfway. • Prints. A page per sheet and per set of bars, plus a shopping list with prices and a total — to mark off as you work. • Runs on iPhone, iPad and Mac. On the iPhone it works on its side too. • Works with no signal at all. Workshops are usually the worst room in the building for that. FREE The whole calculation, the drawings for sheets and bars, the saw screen and the shop calculators. Up to 25 parts, three projects, one kind of sheet and one kind of bar. PRO (one payment, no subscription) Unlimited parts, projects and stock, with several materials in one project. PDF export and printing. The cut order on the drawing. Edge banding edge by edge: parts cut to size, banding counted and priced. Offcuts kept in your library and used first next time. Your own stock list with prices. Your projects on every device you own through iCloud, kept in step as you work. SHOP CALCULATORS — always free Board feet with cost. Purchase allowance, done properly: waste comes out of what you buy, not what you need, so 15% waste means buying about 18% more — not 15%. Project cost with markup. PRIVACY Nothing is collected. No account, no analytics, no tracking. Your cut lists stay on your devices and in your own iCloud.
Kesim
Read full descriptionHide full description
Tell Kesim the parts you need and the material you have. It works out how to get them out of the least stock, then shows you the exact order of saw cuts that produces the layout. Built for people who cut sheet goods on a table saw, a track saw or a panel saw. WHY THE LAYOUTS ACTUALLY WORK Guillotine cuts only. Every cut runs edge to edge, because that is what a saw physically does. A denser layout that needs a cut to stop halfway across the sheet is worthless to the person holding the saw, so Kesim never produces one. Real kerf accounting. The blade turns a few millimetres into dust at every pass. Kesim subtracts a full kerf between neighbouring parts and squares off your edge trim before placing anything. Ignoring that is the classic way to finish a job one part short. Grain locking. A part whose grain must run one way is never quietly turned to make the numbers look better. WHAT YOU GET • A layout for every sheet, with the yield and the cost • A step-by-step cut sequence — rip, then crosscut, in order • An offcut rack: save the leftovers worth keeping, and the next job cuts from material you already own before it opens a new sheet • Sheet goods and linear stock — plywood, MDF, glass and sheet metal, or pipe, timber, extrusion and moulding • Inches with fractions or millimetres, whichever your shop uses • PDF and CSV export, so the plan goes to the shop printer PRIVATE BY DEFAULT No account. No sign-up. No analytics, no tracking, no ads. Your projects are stored on your device and never sent to us — we run no servers. Optional iCloud backup keeps a copy in your own iCloud account, and it is off until you turn it on. FREE AND PRO Free plans jobs of up to 10 parts, which covers a shelf or a small box. Kesim Pro — monthly, yearly with a free week, or a one-time lifetime purchase — unlocks jobs beyond the free limit, the offcut rack, PDF and CSV export, several stock sizes per job, and a more thorough search. Subscriptions renew automatically unless cancelled at least 24 hours before the period ends. Manage or cancel in your Apple Account settings. Privacy policy: https://kesim.app/privacy Support: https://kesim.app/support
Screenshots
Verdict
The clearest difference is iOS requirement: Kesim at 18.0 against Cut List Optimizer's 26.0. On price, ads, in-app purchases and device support there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Both are free to download. Cut List Optimizer sells 1 one-off in-app purchase and Kesim sells 3 in-app purchases, starting at $4.99 per month. Whichever you choose, the download price is not the number that matters.
| Parameter | Cut List Optimizer | Kesim |
|---|---|---|
| Price | Free | Free |
| Rating | — | 5.0 (1 ratings) — better |
| Number of ratings | — | 1 — better |
| Update frequency | Every 3 weeks | — |
| Ads | No | No |
| In-app purchases | Yes | Yes |
| Devices | iPhone, iPad, Mac — better | iPhone, iPad |
| Requires iOS | 26.0 | 18.0 — better |
| Further details — not scored | ||
| Size | 8 MB | 2 MB |
| Age rating | 4+ | 4+ |
| Developer | Armen Ter-Oganezov | BURAK KADAN |
In-app purchases
Cut List Optimizer
- SawKit Pro$24.99
Kesim
- Kesim Pro — Monthly$4.991 Month
- Kesim Pro — Yearly7 Days trial$24.991 Year
- Kesim Pro — Lifetime$39.99








