Comparison

BMS Pal vs CellKeeper

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

BMS Pal

Consolidate data from various battery management systems into a single, live list. Monitor state of charge, voltage, current, and more with detailed per-cell views and historical charts. Offers advanced features like capacity testing and AI-powered sanity checks for your battery packs.

Highlights
  • Live telemetry from multiple BMS
  • Per-cell voltage and balancing indicators
  • Protection alerts in plain language
  • Group packs for combined readings
  • Capacity test and history logging
  • Chemistry detection and override
  • AI-powered sanity checks
Features
Read full description

All your batteries. One app. A JBD pack in the garage, a Victron in the van, a power station on the table - and a different vendor app for each one. BMS Pal ends the app-hopping: every pack you own in one live list, with state of charge, voltage, current, watts, and time remaining. Device detail pages have tools for a deep dive into your devices. Up to eight connected at once. EIGHT FAMILIES AT LAUNCH BMS boards get the deep treatment - per-cell voltages with live balancing indicators, protection alerts, chemistry detection, configuration reads, and confirmation-gated FET control: - JBD (including XiaoXiang and legacy variants) - JK - Daly Battery monitors and power stations get their essentials, with the same charts and history: - Victron (including encrypted advertising) - Junctek KL-F shunt monitors - Bluetti, Jackery, and EcoFlow power stations Coverage varies by family - the full who-reports-what table is at bmspal.app. WHAT IT DOES - Live telemetry: voltage, current, power, temperature, and state of charge stream in as your BMS reports them. Charts hold the last week, so you can see what happened while you slept. - Per-cell detail: every cell gets its own bar, down to the millivolt. Cells the BMS is balancing light up, so you can watch the spread tighten in real time. - Alerts, plainly stated: protection events appear in plain language. No sirens, no red flashing. Just the facts. - Groups: packs that work as one bank read as one battery. Group them series, parallel, or series-parallel and get combined voltage, current, and state of charge. - Capacity tests: run a real discharge test on any pack that reports current. BMS Pal integrates it over time against your cutoff and files the result in the pack's history, so "how many amp-hours, really?" gets a measured answer. - Chemistry detection: BMS Pal reads your protection thresholds and works out whether the pack is LiFePO4 or Li-ion. You can override it - you know your pack best. - Sanity Checks: not sure those numbers are fine? Send a snapshot of your pack for an AI review across six dimensions and get a written verdict back - findings graded by severity, with the reasoning and trade-offs spelled out. You see exactly what is sent before anything leaves your phone, and nothing is sent until you tap. BMS boards only, where the setup can actually be changed. - Write mode, off by default: toggling charge or discharge FETs is serious business on a high-energy pack. Writes sit behind a master switch plus a per-command confirmation, and every attempt is logged. LOCAL-FIRST. ACTUALLY LOCAL. No account, ever. No analytics, no trackers, no background traffic. Your telemetry history lives on your device; delete the app and it is gone. The only network calls are the ones you explicitly ask for (a Sanity Check or a problem report), and you see the exact payload first. THE DEAL Free download, and everything works for 7 days - every protocol, every feature, no card up front. Then $5 unlocks it for good: one purchase, no subscription, no "premium tier" holding features hostage. Sanity Checks run in the cloud and cost real server money, so the app includes 25 and $2 adds 25 more. Everything else runs entirely on your device. ONE DEVELOPER, ONE BENCH Every supported family sits on my bench: 92 wire-protocol variants documented, 1,100+ automated tests in the suite. Got a pack that will not identify, a value that reads wrong, or a feature idea? Report a Problem, Confirm Device Support, and Send Feedback are built in, replies land in your Support inbox, and none of it is ever paywalled. Your reports steer the roadmap. Runs on iPhone, iPad, and Apple Silicon Macs. JBD, XiaoXiang, JK, Daly, Victron, Junctek, Bluetti, Jackery, and EcoFlow are trademarks of their respective owners. BMS Pal is an independent project, not affiliated with or endorsed by any battery vendor. BMS Pal shows you what your BMS reports; it is not a substitute for proper fusing, wiring, and common sense.

About

CellKeeper

Features
Read full description

Keep your portable power station ready for storage, outages and trips. Track charge, follow guided care and estimate how long your appliances can run. CellKeeper is a care log and runtime planner for portable power stations and solar generators of any brand. Log charge levels, get reminders to check and maintain your station, and plan what you can power during an outage. CHARGE LOG AND REMINDERS • Log a charge reading in seconds and see how well your station holds its charge • Get reminders to check the charge and to run maintenance when it's due • Set a reminder to get your station ready before a trip, a storm or expected power cuts • Follow guided steps through a full charge cycle and pick up where you left off CHARGE GAUGE CALIBRATION • Follow a guided BMS calibration cycle for unreliable charge readings when your manufacturer recommends it • Save your progress and get a reminder for each step CARE GUIDE • Clear advice on storage charge, charging speed, safe use and warning signs • Quick links to official manufacturer instructions RUNTIME PLANNER • Pick the appliances you want to run and see how long your station will last • Follow the charge over time on an interactive timeline • Get a warning when your appliances need more power than the station can deliver • Plan rolling power cuts with recharging in between • See which appliance to switch off to make it through • Plan solar charging during the day PRIVATE AND OFFLINE • Works without an internet connection • Syncs privately across your devices with iCloud • No sign-up and no ads GOOD TO KNOW CellKeeper doesn't connect to your power station. You read the charge on its screen or in the manufacturer's app and log it here. Estimates are for planning and depend on your appliances and conditions, so always follow your station's manual. CellKeeper isn't affiliated with any power station manufacturer. Calibration may improve reported charge levels; it does not repair the battery or hardware. Some features, such as tracking more stations, planning rolling power cuts with recharging in between and planning solar charging, require an in-app purchase. Privacy Policy: https://katenin.dev/cellkeeper/privacy Terms of Use: https://katenin.dev/cellkeeper/terms

Screenshots

BMS Pal4 screens
CellKeeper4 screens

Verdict

The call

BMS Pal and CellKeeper are too close to call on the numbers: across 6 compared parameters — price, update cadence, ads and in-app purchases among them — neither pulls far enough ahead to decide it. What separates them is feature set and interface, not measurable difference.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. BMS Pal sells 2 one-off in-app purchases and CellKeeper sells 1 one-off in-app purchase. Whichever you choose, the download price is not the number that matters.

UpkeepUpdate frequency

BMS Pal ships an update every 5 days, CellKeeper weekly. The most recent releases landed on November 21, 2026 and November 16, 2026 respectively.

ScorecardNo meaningful differences
BMS Pal versus CellKeeper: the parameters behind the verdict, then further details
ParameterBMS PalCellKeeper
PriceFreeFree
Rating5.0 (1 ratings) — better—
Positive reviews100.0% of reviews—
Number of ratings1 — better—
Update frequencyEvery 5 days — betterWeekly
AdsNoNo
In-app purchasesYesYes
MonetizationFree with in-app purchases—
DevicesiPhone, iPadiPhone, iPad
Requires iOS26.226.0 — better
Further details — not scored
Size25 MB6 MB
Age rating4+4+
DeveloperInquiring Minds, IncVadym Katenin

In-app purchases

2 purchases

BMS Pal

One-time2
  • 25 Additional Sanity Checks$2.00
  • BMS Pal Unlock (Lifetime)$5.00
1 purchases

CellKeeper

One-time1
  • CellKeeper Plus$4.99

Questions

Is BMS Pal free?
BMS Pal is free to download, with in-app purchases available.
Is CellKeeper free?
CellKeeper is free to download, with in-app purchases available.
Do BMS Pal or CellKeeper have ads?
Neither BMS Pal nor CellKeeper shows ads.
Which is updated more often, BMS Pal or CellKeeper?
BMS Pal ships an update every 5 days, and CellKeeper weekly. Most recently, BMS Pal was updated on November 21, 2026 and CellKeeper on November 16, 2026.

Other comparisons