Audio Frequency Analyzer vs HouseCurve

"Audio Frequency Analyzer" is a powerful real-time audio analyzer (RTA) app for iPhone. With its simple operation, you can easily measure and evaluate your sound environment. This app measures the frequency response in 30 split band scale of 1/3 octave in real time. It can also display the FFT analysis results. It supports calibration for 1/3-octave bands. By adjusting the characteristics to match not only the built-in microphone but also your external microphone, it achieves high measurement accuracy. "Audio Frequency Analyzer" can be used for various applications, including sound room tuning, speaker settings, audio equipment testing, stage setup measurement, sound mixing environment evaluation and noise environment investigation. Features: - Frequency spectrum response measurement of 1/3 octave unit, 30 bands. (OCT) - FFT Analyzer (FFT) - Observation frequency range: 20 - 23000 Hz - Logarithmic amplitude display. - Touch-scroll function to adjust visible amplitude ranges. - Display the measured value of 1/3 oct bands at OCT mode. (dB@OCT) - Function to change the graph slope at FFT mode. (Slope): -3dB/oct (less than 1kHz), +3dB/oct (1kHz or higher) - Peak hold function. (Hold) - Average display function. (Avg): Time linear averaging. Fast-2.56sec, Slow-12.8 sec - Display response control. (Fast/Slow) - Reset of Measurement display position. (Scroll) - Snapshot of Measurement display. (Snap) - Calibration function in OCT mode. (Calibrate): 1/3 octave band offset and total offset setting. - Supports built-in microphone, headset microphone, and external digital audio connection. Note: The first time you access your microphone and photos after installing the app, the iOS system will ask you for permission to access them. If you have not enabled this setting, the app will not be able to access them due to iOS system privacy restrictions. Please enable the access permission in the iOS setting "Settings > Privacy & Security > Photos or Microphone". Please visit our iOS app support page for more information about this app.

HouseCurve is a multi-tool for audio systems. Use it for room correction, adjusting equalizers, setting subwoofer phase, choosing crossovers and more. Features: * Sine sweep and real time pink noise measurements * Sweep measurements can be averaged as they are collected * Alternatively, use real time tool to collect moving mic measurements (MMM) * Compare measurements to a selected target curve * Create and edit target curves * Generate room correction filters (PEQ or FIR) * Filters compatible with a variety of systems including Roon, Volumio, CamillaDSP, EqualizerAPO, miniDSP and Crestron DM NAX * Display magnitude, phase and group delay * Use with built-in or external microphones * Connect with AirPlay, Bluetooth, headphone jack (analog) or use external stimulus HouseCurve measures in-room frequency response by listening to your audio system play a sine sweep. Measurements are displayed on top of a target curve, making it easy to see where adjustment is needed. Multiple measurements can be averaged to fully capture how the system sounds in the listening area. With small changes and repeat measurements, you can manually tune your system to the target curve. If your audio system has a parametric equalizer or convolution engine, HouseCurve can automatically generate filter settings to match the target curve. HouseCurve can help with home and car audio system tuning, from system equalization and room correction to subwoofer time alignment and speaker placement. Visit housecurve.com for more information on how HouseCurve works and how to use it. HouseCurve will produce acceptable results with the built in iPhone/iPad microphone. Using calibrated external microphones will provide higher accuracy. The free version of HouseCurve can measure your audio system and display a magnitude plot (aka "frequency response"). Additional features, such as room correction filter generation, advanced measurement tools and target curve editing can be obtained via in-app purchases.