Qu vs SDC
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Qu
Control your digital mixing console wirelessly from your iPad. Mix sound from anywhere in the room or on stage, allowing for independent control of front-of-house and monitor mixes simultaneously.
- Wireless control for Qu mixers
- Full mixing and setup functions
- Simultaneous independent control
- Remote monitor mixing
- Supports multiple iOS devices
Read full descriptionHide full description
Qu-Pad V1.96 for iPad. This version is for Allen & Heath Qu mixers running V1.9* firmware. Qu-Pad provides full wireless control for Qu range of digital mixing consoles giving the engineer the freedom to walk the room or stage and control the mix right where it is needed. Qu-Pad and the Qu mixing console can work together to provide simultaneous control of independent functions, for example one engineer using the console to mix front-of-house sound and another using the iPad to mix monitors on stage. The Qu mixer supports a maximum of 8 connections to iOS devices with up to two of these running Qu-Pad and the others running the Qu-You Personal Monitor app or Qu-Control app, which are also available free from the Apple Store. This version provides full remote control of the Qu including all mixing and setup functions. Requirements: An Allen & Heath Qu-16, Qu-24, Qu-32, Qu-Pac or Qu-SB mixing console running V1.9* version firmware, with a suitable wireless router or access point connected to its Network port. The Qu mixer firmware and Qu-Pad app maintenance version numbers do not need to be identical, for example Qu-Pad V1.95 will run with Qu mixer V1.91. Refer to the Allen & Heath web site for more information and to download the latest Qu mixer firmware.
SDC
Read full descriptionHide full description
stop guessing - start measuring. you are a touring dj or a sound engineer on a tight schedule and a tighter budget. sdc gets your subs and tops aligned with the gear you already carry. WHAT YOU NEED - iPhone, iPad or Mac - an audio interface, or the usb card already in your mixer - a measurement microphone run the output and the microphone through the same interface. that shared sample clock is what makes the timing trustworthy, and sdc warns you when the two don't match. a built-in phone mic is fine for a rough look - a measurement mic on one shared clock is what you want when it counts. HOW IT GOES 1. hook it up and pick your input and output channels 2. hit start - a level check runs first so you can set your gain 3. the app walks you through it: mute the sub and it measures the top, mute the top and it measures the sub 4. read the answer WHAT YOU GET not a chart to interpret. a sentence to act on: "increase sub delay by 0.8 ms to reach phase alignment at 100 Hz" and the numbers behind it: arrival times for top and sub, the difference in milliseconds and in metres, how far the phase is off at your crossover, and how high up the two stay inside the 60 degree corridor. tell sdc if your dsp or sub runs a 180 degree polarity flip and it aims at the right target angle. set the value on your mixer or dsp. done. THE ROOM, IF YOU WANT IT after a measurement you can add a room sweep to the same export. sdc plays a reference sweep, records the response, and hands you both files as a stimulus/response pair for whatever analyser you already use. no analysis happens in the app - that part stays in your tool. for sweeps, use an interface. a phone's built-in speaker and mic don't share a tight enough clock, and the recording gets rejected on import. BUILT FOR THE FIELD - a guide inside the app: signal chain, mic position and height, the full workflow - an ear protection warning before anything loud plays - works with what you have: usb interfaces, mixer usb cards, wired measurement mics YOUR DATA STAYS YOURS no account, no network, no tracking, no ads. every export lands on your device and goes nowhere unless you send it yourself.
Screenshots
Verdict
The clearest difference is price: Qu at Free against SDC's $3.99. SDC's advantage is update cadence (every 5 days vs every 4 months) and device support (3 vs 1). On ads, in-app purchases and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Qu is free to download; SDC costs $3.99 up front. Neither carries in-app purchases, so what you see is what you pay.
Qu ships an update every 4 months, SDC every 5 days. The most recent releases landed on November 16, 2026 and November 13, 2026 respectively.
| Parameter | Qu | SDC |
|---|---|---|
| Price | Free — better | $3.99 |
| Rating | 3.5 (58 ratings) — better | — |
| Positive reviews | 45.5% of reviews | — |
| Number of ratings | 58 — better | — |
| Update frequency | Every 4 months | Every 5 days — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Free | — |
| Devices | iPad | iPhone, iPad, Mac — better |
| Requires iOS | 15.6 — better | 16.0 |
| Further details — not scored | ||
| Size | 7 MB | 4 MB |
| Age rating | 4+ | 4+ |
| Developer | Allen & Heath Limited | frank Barsch |
In-app purchases
Qu
No in-app purchases
SDC
No in-app purchases









