FishingGPS vs Pipe Offset & Cut Length

This app recored your fishing log with information of GPS. Feature - The fishing location and moving way are recorded automatically. - The destination can be registered and navigation. - The orientation of the ship can be displayed with playback GPS trace. - Photos can be displayed with playback GPS trace. - The fishing data can be recorded with GPS information and you can share with your friend. The fishing sections and the moving sections are displayed by classification by color. Boat fishing, surf fishing, run&gun fishing, and mountain stream fishing etc is possible. Especially in boat fishing, you can grasp how the ship is moving in the sea, and where fishing. This app will consume power receives the GPS in the background. Continued use of GPS running in the background can dramatically decrease battery life. Please check the battery level,and use it. Moreover, please stop the GPS by the STOP button after end of fishing.

Rolling offsets, solved before you cut. Pick the fitting and the size, type what you measured, and you get the cut length with the takeoff (Z in the standards) already subtracted from both ends. Mark the pipe and cut it. ■ If it will not go together, you hear it first A positive number does not mean it can be assembled. When the socket depths would overlap, the app finds it before you cut and shows what does fit — a fitting with a smaller angle, or one size down. ■ Offsets that move in two directions For a rolling offset, the app separates true offset, run, travel (center to center) and the roll angle. It works at 22.5° and 11.25° as well as 45°, and when the run you have is fixed, it can solve for the angle instead. ■ Every number carries its source Welded fittings use the bend radius R = 38.1 x nominal size (inch) with ASME B16.9 for the 45° center-to-end; PVC DWV uses the published fitting dimensions. Japanese standards (JIS K 6739 / K 6743 / K 6777, JIS B 2301) are there when you switch regions. Tap the info button next to the answer to read where a number came from. ■ Fittings that are not in the table, you measure and add Measure a fitting once and register it, and every answer after that matches the part in your hand. Thread engagement can be adjusted per size, one thread at a time. ■ Keep it per job, hand it over on paper Add an answer to a job and it becomes a table: piece number, cut length, fitting, roll angle. Export it as a PDF or CSV. Register a fitting and the numbers on the paper are recomputed too. ■ Works with no connection Everything is computed on the device. Job records stay on this device only — they are not stored in iCloud, so they cannot move to a new phone. What leaves the device is your support messages, plus anonymous usage statistics and crash diagnostics (Firebase Analytics / Crashlytics). ■ About pricing Cut length for a straight run between two fittings, the 45° offset in one plane, the 78 bundled fittings and the welded formula are free, always. Rolling offsets, 22.5° and 11.25°, solving for the angle, your own measured fittings and thread engagement, and job cut lists (PDF/CSV) are Pro. There is a one-time purchase, or monthly and yearly plans. ■ Units and standards Switch between inch (ASME, North America) and mm (JIS, Japan). In North America the fittings become ASME B16.9 (welded) and PVC DWV, and the 45° center-to-end is read from the published table. What the app shows is a guide for installation. The final call belongs to the job's own standards and a licensed fitter. The app does not reproduce standards documents or manufacturer catalogues — it cites the number and name of the standard, the maker and the revision, and computes dimensions from published values and formulas. Monthly and yearly plans renew automatically. You can cancel in Settings > your name > Subscriptions on your iPhone. The one-time purchase does not renew. Terms of Use: https://rainbowtree.work/app/terms Privacy Policy: https://rainbowtree.work/privacy/haikan-kirisunpo.html