PTZ Cntrl vs HC ROP

*Abstract [PTZ Cntrl] is camera control application which controls the system which combines control assist camera (CAC:AW-HEA10) and PTZ camera which means HD integrated cameras (AW-HE130, AW-HE60, AW-HE40/65/70, AW-UE70 and so on which are made by Panasonic Corporation). It shows live views of both cameras on iPad screen and controls PTZ camera's Pan/Tilt, Zoom, Iris, Focus, Gain and so on. If you tap by one finger on the lower screen which shows CAC's wide view, PTZ camera moves the position you tap easily. If you tap by two fingers on it, it moves there and is zoomed up/down. *Accepted model number Control Assist Camera: AW-HEA10, AW-UE4 HD Integrated Camera: AW-UE150, AW-UE70, AW-HE130, AW-HE40/65/70, AW-HE42/68/75, AW-HE60 *Features 1.Pan/Tilt/Zoom operation of HD integrated cameras 2.9 preset position memories 3.Focus/Iris/Gain Control 4.Calibration for camera position by tapping 5.Up to 100 camera registrations by grouping 6.Function to start or stop recording to a microSD card *Remarks This application is for iPad only. Please confirm details for your usage as follows. Japanes:http://panasonic.biz/sav/ English:http://pro-av.panasonic.net/

=== Name of App === HC ROP (HC series memory camera recorder Remote Operation Panel) === Description === HC ROP is a control program that enables the wireless remote control of the memory camera recorder "Panasonic HC-X series" and "Panasonic AG-CX series"(excluding some models). It provides a GUI that displays status information, settings and user switch status in a single screen and the ability to change camera settings intuitively using a screen touch. Buttons such as user buttons and REC S/S button in screen can manipulate camera recorder. HC ROP cam manipulate one memory camera reorder by switching up to eight memory camera reorders. Please tap a "?" button to see a hint for usage of this app. === Applicable Model === HC-X1500, HC-X2000、HC-X1200、HC-X1600、HC-X1800、HC-X2100、HC-X2、HC-X20 AG-CX7, AG-CX8, AG-CX10, AG-CX98、AG-CX20、AG-CX100、AG-CX18 === Supported OS === iOS 15 or later iPadOS 15 or later === Features === 1. Camera status display - List of camera information - ND/CC FILTER - ZOOM/FOCUS - KNEE - TCG - Remaining time of recording media 2. CONTROLLABLE FUNCTIONS - SHUTTER (AUTO/MANUAL) - GAIN - WHITE BALANCE(PRE/A/B, AWB, ABB) - MASTER PEDESTAL - IRIS(AUTO/MANUAL) - Painting GAIN(R/B) - USER SW (1-9) - MENU display and setting - HELP - LOCK（disable operation on HC ROP) - ZOOM(i.ZOOM/i.ZOOM_OFF) - FOCUS(AUTO/MANUAL) - KNEE(AUTO/MANUAL(MID)) - TCG(TC/UB display and setting) - REC CHECK - REC Start/Stop 3. Settings and switching of a connected camera You can set or switch connected cameras in a connect setting panel by tapping a connect manipulation button in the screen. Please refer to "CONNECTION" item by tapping "?" for details. === NOTE === (1)Permission for the local network is required since iOS14. If you cannot connect the app to the camera, make the following settings. 1. Open "Settings" on iPhone/iPad 2. Select "Privacy">"Local Network" 3. Set "HC ROP" to "ON" (2)In iOS, camera information may not be displayed correctly on the app screen.This can be fixed by turning on airplane mode and then turning off again. 1. Close "CX ROP". 2. Select "Settings" on the device home screen 3. Turn on "Airplane mode" 4. Turn off "Airplane mode" 5. Launch "CX ROP" *These settings need to be repeated after turning off or restarting the device.