WeatherTRAK Mobile 3

September 22, 2022

New Feature: Move the Controller asset icon to your current location. A new icon has been added to the Controller asset popup, which, when pressed, will relocate the icon to your current location on the map. Fixes: Various bug fixes to address rare crashes and errors.

July 13, 2022

3.6.1: Stability improvements and fixes

June 14, 2022

New Feature: The new Station High Flow Alert and Manager High Flow Alert test becomes available when an alert containing more than one station has occurred. The test will operate each station and help you determine which station (or mainline) caused the alert. Requires an OptiFlow enabled controller. Workflow Improvements: A selected Controller’s Setting page can now be accessed directly from the Station’s List page via an icon in the top right corner of the page. A selected Controller’s Station List page can now be accessed directly from the Controller Setting page via an icon in the top right corner of the page. In Site Map, the Station Location asset and Station Valve asset, if assigned to the same Station, link to each other via their popup box. In Site Map, the Station Location asset now has complete Start & Stop control of the Station. In Site Map, an icon leading to the Station Programming page has been added to the popup box of the Station Location and Station Valve asset. OptiFlow Controllers in Standard Schedule mode can be programmed via the Program tab on the Controller Settings page. The Active Alerts page will display an Update Alert Status icon when Stations with alerts are present. Starting single station manual irrigation during the scheduled irrigation water window will introduce a new popup dialog with the added option to operate the single station along with any scheduled irrigation. General: The Controller model, firmware version, and modem type can be found listed at the top of the Program tab on the Controller Settings page. The Controller status is now displayed in the Controller icons in Site Map. Various bug fixes and under-the-hood improvements.

October 26, 2021

Fixed "Water Window 1 and 2 are overlapping" message on the Controller Programming page is now displaying correctly. Controller Mode summary on the Site Overview page is now listing modes correctly. Controllers listed under Unlock/Lock on the Access tab are now displaying serial numbers correctly. Scheduled irrigation will now pause correctly when manual irrigation is initiated at the same time - OptiFlow controllers. Various under-the-hood improvements to improve stability

August 5, 2021

New in Version 3.5 • Site Map: Asset icon display count options are now 500 (default) and No Limit. • Site Map: The Station Location asset now has Notes capability. • Dialog: If changes are made on any of the Station and Controller Programming pages and not applied, when attempting to leave, a dialog box will appear providing an option to apply those changes. • Station Programming: All the programming settings found in WeatherTRAK Central, under Stations, on the Program page are now available. This includes all the advanced settings for stations from Auto Mode and the settings from User Mode. • Station Programming: Each Station's Current Depletion can now be referenced and changed. This setting can be found at the bottom of GLOBAL. • Station Programming: Each Station's Flow Rate and High Flow Threshold can be user-defined. Otherwise, any learned flow will be displayed along with the calculated High and Low Flow Threshold values. If a learned Flow Rate and calculated High Flow Rate are user-defined, (User) will appear next to the setting name in blue. Enter a value of 0 (zero) to return to the learned and calculated values. Note: The calculated values are defined by the Station High Flow Offset % and Station Low Flow Offset % found on the new Controller Programming page, or on WeatherTRAK Central under Flow, on the Program page. • Controller Settings: Master Valve Override MVO and Controller Unlock/Lock can now be found under a single tab titled ACCESS. New messaging for controllers that do not support these features has been added. • Controller Programming: A new tab has been added on the Controller Settings page titled PROGRAM. Controller programming settings can be found under this tab. These are the same settings that are on the Program page for each controller on WeatherTRAK Central. Note: Due to the advanced requirements, some of the OptiFlow controller programming is still performed via the Configure page on WeatherTRAK Central. • Setup: Controller settings found in the Setup section of the Program page on WeatherTRAK Central are available. • Flow: Controller settings found in the Flow section of the Program page on WeatherTRAK Central are available. • Days/Times: Controller settings found in the Days/Times section of the Program page on WeatherTRAK Central are available. • Custom Plants can only be found on WeatherTRAK Central. • General: If a password reset has been set, you can now create a new password within the app. • General: When a new controller is powered up for the first time and begins the 10 – 15 minute-long server synchronization process. The Controllers page will display a sync icon next to the controller if present. A message will display if the controller is selected. • General: It is our continuing goal to provide a faster, more reliable, and more user-friendly experience. Therefore, bug fixes, minor visual tweaks, and under-the-hood improvements are always a part of a WeatherTRAK Mobile release.

March 31, 2021

Minor bug fixes and improvements. 

March 2, 2021

• New communication architecture aims to improve reliability and performance consistency. • Longer station, controller, and site names are better accommodated, more notably on smaller-sized screens. • Default zoom level in Site Map is increased, putting the site and the assets closer in view upon opening. • Asset icons in search queries are now appropriately scaled. • Station numbers have been added next to the station name in the Station Location asset popup. • “Location on Slope” setting has been added to Station Programming. • Changing controller mode now shows the newly selected mode name blink during the time it takes for the change to occur. Blinking stops once the new mode is set. • “Activating a manual run will pause all scheduled irrigation. Continue?” will now only show once per session for the selected controller once dismissed. • Accommodates triple-digit alert numbers. • Improved visual feedback in Multiple/Stacked mode during operation. • Various graphical tweaks throughout the application.

November 22, 2020

New in version 3.2.2: • Fixed issue where User Rain Pause was not accessible during both enabled or disabled WeatherTRAK Rain Pause Events.

October 3, 2020

WeatherTRAK enables you to manage and operate your WeatherTRAK smart irrigation sites from anywhere, on-site, or on the go. Within one intuitive interface, you can access all your accounts, sites, controllers, and stations to activate manual irrigation easily, manage alerts, map out your site, efficiently troubleshoot issues, and adjust programming and controller modes. WeatherTRAK gives you the freedom and flexibility to manage your smart water management solution from anywhere. New in version 3.2.1: • Fixed issue where single site accounts with large controller counts were causing significant performance slowdowns. • Fixed issue with large alert counts not displaying correctly. New in version 3.2: • Proactive Notification Banner will popup to display important messages regarding server maintenance updates, for example. • Refined user interface throughout the app. • Added alert Icons and highlight color to add clarity to the severity and type of alert being viewed throughout the app. • Ability to independently clear flow or electrical alerts from the Active Alerts page. • Alert Icons and highlight color to add clarity to the severity and type of alert being viewed on the Stations page. • Ability to place a Station Location Asset directly from the Station Settings/Programming page. • Ability to view an existing Station Location Asset directly from the Station Settings/Programming page. • Ability to Start/Stop a station for a defined period of time from the Station Settings/Programming page. • Consolidated view of Site and Controllers for ones managing a single site. • Ability to view station level alerts on the Station Settings/Programming page. • Alerts now total Critical/Major and Minor/Low on the Sites and Controller pages. • Icon indicator on the Station page when Station Location Assets are assigned to a station. • Individual program overview added to the Program tab on the Stations page. • Current app version number now displayed at the top of the Support and Profile pages. Also included: • Access any of your sites, controllers, or stations • Create a virtual as-built of your site using the Site Map. • Navigate to individual assets on your site using GPS navigation. • Get an overview of your site that includes a 7-day weather forecast and current alerts and controller statuses. • Take photos and notes for individual assets and keep track of crucial details for troubleshooting. • Three manual irrigation modes: single station, multiple station, and by program • View currently running stations for manual irrigation • Create manual irrigation sequences with specific times for each station • Improved manual irrigation response time • Station Programming: Configure new stations or adjust settings right from the app • Set the controller mode (on, off, winterized, shutdown) • Set rain pauses and view the irrigation cycle resume time and date • Override the Master Valve for hose irrigation or troubleshooting, with automatic shut-off • Adjust station runtime percentages • View and clear alerts • Use the app in either English or Spanish • Built-in help in both English and Spanish Supported controllers: • OptiFlow XR • ET Pro3 • LC and LC+ • Pro2 Note: For access to all the mobile features, and to ensure optimal performance, make sure your controller has the latest firmware installed. Update your controller over-the-air with the Cloud Update Key or OptiFlow Key. For questions or to upgrade your firmware, contact support@hydropoint.com

September 29, 2020

WeatherTRAK enables you to manage and operate your WeatherTRAK smart irrigation sites from anywhere, on site or on the go. Within one intuitive interface, you can access all your accounts, sites, controllers, and stations to easily activate manual irrigation, manage alerts, map out your site, efficiently troubleshoot issues, and adjust programming and controller modes. WeatherTRAK gives you the freedom and flexibility to manage your smart water management solution from anywhere. New in version 3.2: • Proactive Notification Banner will popup to display important messages regarding server maintenance updates, for example. • Refined user interface throughout the app. • Added alert Icons and highlight color to add clarity to the severity and type of alert being viewed throughout the app. • Ability to independently clear flow or electrical alerts from the Active Alerts page. • Alert Icons and highlight color to add clarity to the severity and type of alert being viewed on the Stations page. • Ability to place a Station Location Asset directly from the Station Settings/Programming page. • Ability to view an existing Station Location Asset directly from the Station Settings/Programming page. • Ability to Start/Stop a station for a defined period of time from the Station Settings/Programming page. • Consolidated view of Site and Controllers for ones managing a single site. • Ability to view station level alerts on the Station Settings/Programming page. • Alerts now total Critical/Major and Minor/Low on the Sites and Controller pages. • Icon indicator on the Station page when Station Location Assets are assigned to a station. • Individual program overview added to the Program tab on the Stations page. • Current app version number now displayed at the top of the Support and Profile pages. Also included: • Access any of your sites, controllers, or stations • Create a virtual as-built of your site using the Site Map. • Navigate to individual assets on your site using GPS navigation. • Get an overview of your site that includes a 7-day weather forecast, and current alerts and controller statuses. • Take photos and notes for individual assets and keep track of crucial details for troubleshooting. • Three manual irrigation modes: single station, multiple station, and by program • View currently running stations for manual irrigation • Create manual irrigation sequences with specific times for each station • Improved manual irrigation response time • Station Programming: Configure new stations or adjust settings right from the app • Set the controller mode (on, off, winterized, shutdown) • Set rain pauses and view the irrigation cycle resume time and date • Override the Master Valve for hose irrigation or troubleshooting, with automatic shut-off • Adjust station runtime percentages • View and clear alerts • Use the app in either English or Spanish • Built-in help in both English and Spanish Supported controllers: • OptiFlow XR • ET Pro3 • LC and LC+ • Pro2 Note: For access to all the mobile features, and to ensure optimal performance, make sure your controller has the latest firmware installed. Update your controller over-the-air with the Cloud Update Key or OptiFlow Key. For questions, or to upgrade your firmware, contact support@hydropoint.com