Under My Roof Home Inventory +

• New Add From Receipt feature that streamlines data entry. Tap and hold the Add Item button at the bottom of the Item List and select Add From Receipt to use the built-in camera to scan a receipt. The New Item Panel is then shown with the scanned receipt attached and the Purchased From and Purchase Date fields seeded with values recognized from the receipt. • When adding a new item where a receipt has been added inside the New Item Panel or creating a new item from a receipt in the Inbox, you can use the Select Receipt Text button to select text from the receipt and use it to set the value of the field. This is available for most text fields, date fields, and currency fields. • The Select Receipt Text feature is also available when editing an existing item that already has a receipt. • If you add a receipt inside the New Item Panel or use the Inbox to add a new item from a receipt, Under My Roof will try to automatically seed the Purchased From and Purchase Date fields from text it finds in the receipt. • You can now add receipts from the Inbox from inside the New Item Panel. • You can also add photos from the Inbox from inside the New Item Panel. • Under My Roof now prompts you on whether or not to delete the Inbox entries used when creating a new item from the Inbox or adding a photo, receipt, or attachment from the Inbox. • Fixed an issue where the default field values in the New Item Panel may not be set as expected when adding a new item to a container item. • Fixed a bug in Reports where the main photo of an item needs to start on the next page can overlay the information for the item that follows it. • Fixed a bug where only the first photo would be imported for a location when importing a .hi3 file.

Fixed an animation glitch when transitioning between two and three pane mode on the iPad. Also contains the enhances and fixes from version 1.6.2: • When disposing of an Item with a quantity greater than one, you can now choose the quantity to be disposed. This option is not available if you are disposing of multiple items at once via multi-select. • The Supply Category in New Supply Entry Panel is automatically seeded with the category the Supply List is being filtered by, if any, when adding a new supply. • When a filter is applied to the Item List, the item count and value now applies the same filter when determining the count and value contributions from any sub-locations and sub-categories. • Negative amounts are allowed in Payment entries so refunds can be recorded. • Changing the default currency for a home will update all currency-related fields for items, supplies, and other data in the home by converting the existing values to the new currency type based on the current exchange rate. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Currency field values are automatically converted to the new default currency when moving items to another home with a different default currency. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Currency field values for items and supplies in a moving box are automatically converted to the new default currency when the box is moved to another home with a different default currency. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Fixed an issue where the iPad version could crash in the background or when going from Slide Over to Full Screen. • Fixed a typo in the confirmation panel shown when checking off a maintenance task and the quantity of supplies on hand is lower than the amount required for the task. • Fixed a bug where items in a container item would appear in the category, collection, condition, tag, or heir section of a report that applies to the container item, but not the items within the container.

• When disposing of an Item with a quantity greater than one, you can now choose the quantity to be disposed. This option is not available if you are disposing of multiple items at once via multi-select. • The Supply Category in New Supply Entry Panel is automatically seeded with the category the Supply List is being filtered by, if any, when adding a new supply. • When a filter is applied to the Item List, the item count and value now applies the same filter when determining the count and value contributions from any sub-locations and sub-categories. • Negative amounts are allowed in Payment entries so refunds can be recorded. • Changing the default currency for a home will update all currency-related fields for items, supplies, and other data in the home by converting the existing values to the new currency type based on the current exchange rate. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Currency field values are automatically converted to the new default currency when moving items to another home with a different default currency. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Currency field values for items and supplies in a moving box are automatically converted to the new default currency when the box is moved to another home with a different default currency. The original amounts and currency codes are maintained (and shown when there is a difference from the home's default currency) for historical purposes and for future conversions. • Fixed an issue where the iPad version could crash in the background or when going from Slide Over to Full Screen. • Fixed a typo in the confirmation panel shown when checking off a maintenance task and the quantity of supplies on hand is lower than the amount required for the task. • Fixed a bug where items in a container item would appear in the category, collection, condition, tag, or heir section of a report that applies to the container item, but not the items within the container.

This update fixes an issue with incorrectly calculating the area of non-rectangular rooms in 3D room scans. 3D room scans exhibiting this behavior will need to be rescanned. Rest assured that the development team (Kevin) feels much shame. This update also includes all of the wonderful new features and fixes introduced in version 1.6: • Create 3D scans of the locations in your home, using a LiDAR-capable iPhone Pro (12 Pro and later) or iPad Pro (Spring 2020 and later models). Just tap the + button in the Photos section of a Location's Detail View and select From Room Scan. • You can view and interact with the scans on any device. Tap any part of the room or the objects in it to get dimensions. Note: These measurements are estimates only and you should be sure to use a real tape measure when exact measurements are needed. • Use the Virtual Tape Measure feature to take virtual measurements within a scanned room. Note: The measurements are only estimates. • Supplies now have their own categories. Tap or click the folder icon in the upper right corner of the Supplies List to manage supply categories. • You can now filter the Supply List by supply category. • Supply entries can now have multiple locations. • You can now distribute quantities from a supply purchase across the different supply locations. • New Usage section shows you the usage history of a supply. • Add supply usage entries for additional usage tracking outside of the Parts & Components section for Repairs and Changes entries and Maintenance Task supplies. • Add supply usage entries for supplies that were disposed of (thrown away, lost, expired, etc). • You can now add all of the supplies needed for a maintenance task through a single panel. • Configure which locations are pulled from for maintenance task supplies. • Edit the supplies used when checking off a maintenance tasks instead of having to edit the created maintenance history record. • You can now add items as Parts & Supplies entries for Repair/Maintenance and Change/Modification entries for homes and locations. This is intended for things like replacing a furnace. • Tap and hold (iPhone/iPad) or right click (Mac) on a Parts & Supplies entry to view the associated item or supply, if any. • The total contribution from Payments to the cost of a Repair/Maintenance or Change/Modification is now shown along with the contribution from Parts & Supplies. • Supply Availability Summary reports include location information for supplies that are stored in multiple locations. • Supply Availability Summary reports can be organized by supply category. • Supply Usage Summary reports now include a breakdown of disposed supplies by disposal method. • Keep track of Payments for Policies. • Keep track of Payments for Warranties. • Added two new disposal types: Damaged and Expired. • The Sq. Feet/Area (sq m) field for homes and locations has been renamed to just Area, regardless of the device's region settings. • You can now change the units used for the Area field in a home. This value is reflected in all locations within the home as well. • Added a toggle to the Inbox View to show Inbox Entries at a larger size. • Item List and Item Detail reports can now be filtered by Moving Box. • Added a Filter Items option to Moving Box Item List and Moving Box Item Detail reports with the ability to select specific boxes that appear in the report. • Fixed an issue where you aren't prompted to add low supplies to Reminders in iOS/iPadOS 17 and macOS 14. • Fixed a bug that resulted in periodically repeating prompts to add a low supply to Reminders if you selected Cancel on the prompt. • Fixed a bug that resulted in the Repairs View filter being hidden when there are no entries to show.

• Create 3D scans of the locations in your home, using a LiDAR-capable iPhone Pro (12 Pro and later) or iPad Pro (Spring 2020 and later models). Just tap the + button in the Photos section of a Location's Detail View and select From Room Scan. • You can view and interact with the scans on any device. Tap any part of the room or the objects in it to get dimensions. Note: These measurements are estimates only and you should be sure to use a real tape measure when exact measurements are needed. • Use the Virtual Tape Measure feature to take virtual measurements within a scanned room. Note: The measurements are only estimates. • Supplies now have their own categories. Tap or click the folder icon in the upper right corner of the Supplies List to manage supply categories. • You can now filter the Supply List by supply category. • Supply entries can now have multiple locations. • You can now distribute quantities from a supply purchase across the different supply locations. • New Usage section shows you the usage history of a supply. • Add supply usage entries for additional usage tracking outside of the Parts & Components section for Repairs and Changes entries and Maintenance Task supplies. • Add supply usage entries for supplies that were disposed of (thrown away, lost, expired, etc). • You can now add all of the supplies needed for a maintenance task through a single panel. • Configure which locations are pulled from for maintenance task supplies. • Edit the supplies used when checking off a maintenance tasks instead of having to edit the created maintenance history record. • You can now add items as Parts & Supplies entries for Repair/Maintenance and Change/Modification entries for homes and locations. This is intended for things like replacing a furnace. • Tap and hold (iPhone/iPad) or right click (Mac) on a Parts & Supplies entry to view the associated item or supply, if any. • The total contribution from Payments to the cost of a Repair/Maintenance or Change/Modification is now shown along with the contribution from Parts & Supplies. • Supply Availability Summary reports include location information for supplies that are stored in multiple locations. • Supply Availability Summary reports can be organized by supply category. • Supply Usage Summary reports now include a breakdown of disposed supplies by disposal method. • Keep track of Payments for Policies. • Keep track of Payments for Warranties. • Added two new disposal types: Damaged and Expired. • The Sq. Feet/Area (sq m) field for homes and locations has been renamed to just Area, regardless of the device's region settings. • You can now change the units used for the Area field in a home. This value is reflected in all locations within the home as well. • Added a toggle to the Inbox View to show Inbox Entries at a larger size. • Item List and Item Detail reports can now be filtered by Moving Box. • Added a Filter Items option to Moving Box Item List and Moving Box Item Detail reports with the ability to select specific boxes that appear in the report. • Fixed an issue where you aren't prompted to add low supplies to Reminders in iOS/iPadOS 17 and macOS 14. • Fixed a bug that resulted in periodically repeating prompts to add a low supply to Reminders if you selected Cancel on the prompt. • Fixed a bug that resulted in the Repairs View filter being hidden when there are no entries to show.

• You can now filter Repair and Maintenance entries in the Repairs section. • Improved the alignment of dates and made better use of space in the Repairs List, Changes List, Claims List, Claims Expenses List, and Supply Purchases List. • New sort option for the Disposed Items List to sort disposed items by Disposed Method. • You can now create filters based on the Disposed Method. • The Disposed Items List can now have a different active Filter than used for the Item Lists showing non-disposed items. • Support for inventory passwords greater than 31 characters in length. • The currently selected Item Detail Sub-view, such as Photos, Receipts, Repairs, or Changes, is maintained when moving from one item to another in the Item List. This behavior is also implemented for the Navigation List when switching between different Collections, Heirs, Locations, Policies, or Supplies. (iPad Only) • Fixed an issue where a crash could result from applying a Filter to the Item List that only returned a few results. • Fixed an issue with editing a Search Result from a different home than the currently active home. • Fixed an issue with prices from item barcode lookups where ',' is used as the decimal separator in the device's settings. • Fixed a bug where an item that was explicitly included as part of a policy's coverage was still included after the item was marked as disposed. • Enhancement to the sync engine to automatically handle an unexpected database merge issue without user intervention. • Various improvements to Under My Roof's built-in troubleshooting utilities, including the ability to export all log files at once. These tools were designed with privacy in mind and cannot be run remotely by us, nor do they send any information back to us.

• You can now add items to another item. So as not to overwhelm the Location List with every item in your inventory, you must first tap and hold (iPhone/iPad) or right click (Mac) on the item in the Item List and select "Can contain other items" to make the item a container. The item will now appear in the Location List and it will also be a valid choice in many places where you can choose a location. • You can now expand and collapse sub-locations when navigating the Location List. • You can now expand and collapse sub-categories when navigating the Category List. • The Moving Boxes List now shows moving boxes hierarchically and supports collapsing and expanding boxes that are stored in other boxes. • Moving Boxes that are sub-locations of a non-moving box location (and any boxes packed inside of those boxes) now appear in the Location List. • New Unpacking Panel for Moving Boxes. • Select All/Deselect All button in the Moving Box Move Panel. • Add a new Moving Box by scanning its barcode. The new box's Barcode field will automatically be set to the scanned barcode. • Enabling the new Scanned Barcode As Box Name setting will automatically set the name of a Moving Box added using Barcode Scanning to that of the scanned barcode. • The auto-generated Moving Box Name/Number assigned when a new moving box is added will still increment if you add additional text to the name. • Supplies with their Location set to a Moving Box will now be moved with the box when it is moved to a new home. • Searching for a Moving Box by scanning its barcode will search the Name field of each box in addition to the Barcode field for an exact match. • Improved Packing Interface for packing items into Moving Boxes. • The Moving Box Prefix portion for the auto-generated Moving Box name can now be set to no value in Settings, allowing for auto-generated box names with no prefix. • The number of digits of the Next Moving Box Number value in Settings indicates the minimum number of digits displayed when auto-generating Moving Box names. • You can now add a photo directly when adding a new Moving Box instead of having to go to its Photos section after the box was added. • Maintenance Task Supply entries are updated appropriately when moving an Item to another Home. • Sub-Locations and Moving Boxes that appear in the Item List now include a photo (if available). • Add a new component to the Parts & Supplies list for a Repair or Change by scanning its barcode. This option is accessible from the + button in the top right of a Repair View or Change View. • You now right click on a sub-location, sub-category, or collection in the Item List to view or edit it directly. • New Moving Box Item Detail report type for creating reports with the full detail os each item packed in each moving box. • New Moving Box Item List report type for producing a compact list of items packed in each moving box. • Added a new Moving Box List report type that generates a simple list of all of your Moving Boxes, including the dimensions, weight, and value of the items packed in each box. The totals include the total number of boxes, number of boxes packed inside of other boxes, the weight, and the number of items packed and their value. • The dimensions and weight for Moving Boxes are now included on section title pages when generating a report. • Item-based reports organized by Location will now include a breakdown by Moving Box in the report's summary. • Fixed a crash that can occur while navigating in Split View mode or in Stage Manager on the iPad. • Fixed a crash that can occur when using Search in Split View mode of in Stage Manager on the iPad. • Fixed an issue with the bottom toolbars drawing incorrectly in some cases when navigating in or exiting Split View mode or resizing in Stage Manager on the iPad. • Fixed an issue with not including the items in a Moving Box that is in a sub-location in the totals that appear in above the Item List when browsing the parent location.

• Updated barcode lookups to handle changes in how information is provided by our product information service providers. • Fixed a problem where the currency unit would not show up correctly until after an item was added when adding an item via barcode scanning with a price in a different currency unit from the currency type associated with the home. • Under My Roof now parses the → character separating nested Locations and Categories when importing CSV data. • Fixed a typo in the search results prompt.

Fixed an issue with the Options Menu button not always being visible on the iPad in portrait mode in iPadOS 16.1 and later. This update also includes all of the enhancements and fixes in version 1.4.1: • Improved camera focusing when attempting to scan a barcode using an iPhone 11 Pro, iPhone 12 Pro, or iPad Pro with a rear triple-camera setup. • Added an additional product lookup service. This will increase the likelihood of being able to find product information when adding a new item via a barcode lookup. • Product information lookups from 12-digit UPC-A barcodes are now performed with both the 13-digit EAN variant and the original 12-digit code to increase the likelihood of finding a match. • The Serial Number field is now also considered when searching your existing inventory from a barcode scan. • Scanning barcodes with the built-in camera no longer interrupts background audio playback. • Maintenance tasks now include the home when shown in the Maintenance Schedule for an inventory that includes multiple homes. • Added a new scheduling type for Maintenance Tasks called At Interval After Completion. This type schedules the next occurrence of a task based on the date it was completed or skipped. This differs from tasks that are scheduled At Regular Intervals, where the next occurrence is based on the due date of the task. • You can now edit the Scheduled field for existing Maintenance Tasks. • The Scheduled field is now displayed in the Detail View for a Maintenance Task. • Binary data export operations will now continue when encountering minor errors instead of stopping the entire export.

• Improved camera focusing when attempting to scan a barcode using an iPhone 11 Pro, iPhone 12 Pro, or iPad Pro with a rear triple-camera setup. • Added an additional product lookup service. This will increase the likelihood of being able to find product information when adding a new item via a barcode lookup. • Product information lookups from 12-digit UPC-A barcodes are now performed with both the 13-digit EAN variant and the original 12-digit code to increase the likelihood of finding a match. • The Serial Number field is now also considered when searching your existing inventory from a barcode scan. • Scanning barcodes with the built-in camera no longer interrupts background audio playback. • Maintenance tasks now include the home when shown in the Maintenance Schedule for an inventory that includes multiple homes. • Added a new scheduling type for Maintenance Tasks called At Interval After Completion. This type schedules the next occurrence of a task based on the date it was completed or skipped. This differs from tasks that are scheduled At Regular Intervals, where the next occurrence is based on the due date of the task. • You can now edit the Scheduled field for existing Maintenance Tasks. • The Scheduled field is now displayed in the Detail View for a Maintenance Task. • Binary data export operations will now continue when encountering minor errors instead of stopping the entire export.