DrawerCraft

DrawerCraft turns a messy drawer into a printed, labeled Gridfinity layout, without the guesswork. Measure the space. Get the baseplate that actually fits. Lay out the bins. Write down what goes in each one. Find it again six months later. MEASURE THE SPACE - Type in what you measured. - Millimeters or inches, your choice. - Preview the finished layout in AR at full size, sitting in the actual drawer, before you commit nine hours of printing to it. GET THE PLATE THAT FITS - DrawerCraft works out the largest baseplate that drops into the space you measured, and shows exactly how much room is left over. - Real Gridfinity geometry throughout: 42 mm pitch, 7 mm height units, 0.5 mm clearance, magnet and screw hole positions. LAY OUT THE BINS - Drag bins onto the plate. Everything snaps to the grid, nothing overlaps, nothing hangs off the edge. - Auto-fill covers a whole plate in one tap. Reroll it until you like what you see. - Color-code bins so the plan reads at a glance. PLAN THE PRINT RUN (Pro) - Set your printer's bed size, from presets for common machines or your own numbers. - Oversized baseplates are divided into pieces that fit your bed and reassemble into the original plate. - See how many bed-loads the whole job takes before you start the first one. NEVER LOSE IT AGAIN (Pro) - List what goes in each bin, then search everything you own from anywhere in the app. - Photograph a drawer, so you can see what's in it rather than just read about it. - Rooms, furniture, spaces: a drawer files under the workbench it's in, and that workbench under the garage. FREE VERSION The free version keeps one room with one drawer in it, and is ad supported. Measuring, plate fitting and bin layout are all there. DrawerCraft Pro is one purchase, not a subscription. It unlocks unlimited rooms and drawers, bin contents and search, print run planning, custom bin shapes, every accent color, light and dark themes, and it removes the ads. PLEASE NOTE DrawerCraft plans layouts. It does not generate STL files. Print your bins and baseplates from any of the many free Gridfinity models already out there; the plan tells you which sizes to print and how many of each. Gridfinity is an open standard created by Zack Freedman. DrawerCraft is an independent app and is not affiliated with him or with any bin vendor.