半成品
Nano flat+連結app使用不便，時間亮度無法刪改
排程無法重啟
關閉後，待到隔日，開啟時間，排程不會自動再開啟
垃圾燈
大家千萬不要花冤枉錢
去買ADA更好用
這個產品連線完全用不了 爛死了
去買ADA更好用
這個產品連線完全用不了 爛死了
常常打不開
APP連線很不穩，如果都要手動去開，那麼多花錢升級智慧版是買心酸嗎？
Used to work perfectly
I came to the App Store in hopes of seeing that I needed to update my app, since there aren’t any updates maybe a review will help get this sorted? I’ve been controlling my Flat Nano+ for a few years with this app without issue. However I’m trying to adjust the schedule for it and it kicks me back to the Home Screen/device list every time I try to change something.
Show more
Easy to use
I don’t think the 2 star rating is fair at all. This is a very simple app that is easy to use. The only downside is the way you have to delete each timer from the latest to the first, which makes sense from a development standpoint because the next timer in sequence automatically sets the start time. There is a pairing walk through too, so setting up is easy. I don’t know what the fuss is about.
Show more
設置不好用
調整時間很困難，必須所以時間段都刪除。app一直不升級改進⋯
Are you serious
This is a horrible app, my lights doesn’t even want to connect with this stupid app
Simple app; does the job
TL;DR: The app is simple. The lights are simple. Read the instructions or watch the videos on first setup. // When you first boot up the app to connect a device, it runs through the intro to show you (with pictures) how to add new devices. If you skip past that, you can access the instructions again in the app’s menu, which is under the three lines on the top left. If you miss the bluetooth light and don’t know how to get it back, they even have instructional videos on their website or on YT that show you how to unplug the light, then plug it back in. They have videos that go into more detail for each of the different types of lamps. The language of the site is in Chinese, but the browser should have the option to translate it to whatever language you need. Otherwise, YT has videos listed if you look up ‘ONF’ or ‘ONF lights’ or something. I don’t know. It was easy to setup, so I didn’t need to go that far into it.
Show more
There are definitely some improvements that could be made
The app works, and for me, I use the “Daylight circle” so it’s a set it and forget it kind of thing. For that purpose it definitely gets the job done. However it’s not the easiest.
My main complaints are:
1) When you are adding your day light circle settings (ex. 50% brightness from 8am - 10 am) each subsequent setting is dependent on the end time of the one right before it. So if you have 3 settings (8-10, 10-12, 12-2) and you want to change the first setting go end at 11 instead of 10, you have to delete all of the later-in-the-day settings before it will let you adjust the earlier one.
2) When you make your daylight circle, you are limited to 6 different settings that it will cycle through for the day. That’s honestly enough, but it doesn’t indicate that until after you have added the 6th. This is super annoying considering my first issue (above) because you can only edit the timing of the latest-in-the-day setting. So when you find out that the 6th one you added is the last one you can add, and that schedule doesn’t cover the full day, you have to delete everything and start over.
3) My final issue is specific to the “Blue White Flat One +” but the color temperature graph is backwards on the Daylight Cycle chart. So full white with no blue on the actual light shows as dark blue on the graph (and vise versa). It doesn’t have that problem with the “Yellow White” version of the light.
So overall, because I rarely have to use the app, and once you understand its quirks it does serve its purpose (even if it’s a little frustrating) I’m giving it 3/5 start. Mostly because the light itself is really nice
My main complaints are:
1) When you are adding your day light circle settings (ex. 50% brightness from 8am - 10 am) each subsequent setting is dependent on the end time of the one right before it. So if you have 3 settings (8-10, 10-12, 12-2) and you want to change the first setting go end at 11 instead of 10, you have to delete all of the later-in-the-day settings before it will let you adjust the earlier one.
2) When you make your daylight circle, you are limited to 6 different settings that it will cycle through for the day. That’s honestly enough, but it doesn’t indicate that until after you have added the 6th. This is super annoying considering my first issue (above) because you can only edit the timing of the latest-in-the-day setting. So when you find out that the 6th one you added is the last one you can add, and that schedule doesn’t cover the full day, you have to delete everything and start over.
3) My final issue is specific to the “Blue White Flat One +” but the color temperature graph is backwards on the Daylight Cycle chart. So full white with no blue on the actual light shows as dark blue on the graph (and vise versa). It doesn’t have that problem with the “Yellow White” version of the light.
So overall, because I rarely have to use the app, and once you understand its quirks it does serve its purpose (even if it’s a little frustrating) I’m giving it 3/5 start. Mostly because the light itself is really nice
Show more
Limited information
I purchased an ONF Misto (not Misto+) and downloaded the ONF Link app after clicking on the provided QR code and following the directions to do so — but the app does not work with Misto because the simple Misto does not have Bluetooth.
Tệ
Quá tệ. App ko hỗ trợ kết nối. Thường xuyên treo lag
Always dropping connection
It would be fine, a very simple app, but fine. However, it took me about 10 attempts to set it up because it kept dropping the connection - I was less than 1m away. For a £120 led light you don’t expect these kinds of basic issues, my HD Prime works seamlessly compared to this. Please sort it out devs!
Show more
Horrible
The app is almost unuseae. The only way the Bluetooth stays connected is if I’m physically engaging with the app with it open on my screen. If I close the app because I have to leave the house, the automated settings no longer function. Total garbage.
有進步空間
建議調色溫不要放在最下面，會一直滑到手機最下面的線
Doesn’t make any sense for Bluetooth
Have already tried this app to connect with the device by 4 smartphone/pads, only two of them worked (even worse, only works on former OS versions). Can’t get any help from support center either.
app只是ui设计的好看，用户体验确实极差
跟onf的水草灯类似，都是浮于表面，外表 工业设计可能还行，但是灯源显色 什么真的很差劲，还有就是这个app用户体验，到底是时间控制还是当即显示状态，居然是通过最后一次停留的tab标签页 来控制，用了这么多app，这种交互逻辑第一次遇见。还有就是时段控制，居然必须从最后一个时段修改才能改上面的时段
日光循環調整很難操控
只要設定好了，就只能調整最後的結束時間，開始時間跟中間的時段如要調整都不行，拜託請調整一下
Complete trash
I’m so disappointed how bad this app is. I really like how the light grows my plants; however like other posts, this app is complete garbage and needs a complete overhaul.
Timer pretty much useless
The timer simply does not work, unless you open the app and tap on it. Might as well do it manually. Seems like this app is not getting updated… wish I would have read the reviews and gotten a flat nano without app feature.
