DO NOT LOAD
This version sucks! It cannot find my devices and trying to login keeps giving Error message. Now all my devices are going to have to be replaced!! Where is the old app?
Playbulb zarovka
Not work ios 18.2.1
Needs update
Needs an update to be fully compatible with new screen sizes/resolutions.
Otřesný support.
Opravdu musí být udělány 3 verze jedné aplikace z nichž první fungovala asi nejlépe? Jen ji chtělo trochu doladit.
Vážně nemůžu tahem zvolit barvu světla jako v první verzi? Opravdu musím stupidně ťukat sem a tam jak blbec?
Nelze nastavit, aby se světlo opakovaně rozsvěcelo spolu s budíkem? Synchronizace? Tenhle pojem vývojářům asi nic neříká.
Absence tmavého motivu v roce 2021 jen podtrhuje neochotu cokoliv zlepšovat.
Věřím že i studenti na škole by za pouhý měsíc zvládli aplikaci vyladit mnohem lépe.
Vážně nemůžu tahem zvolit barvu světla jako v první verzi? Opravdu musím stupidně ťukat sem a tam jak blbec?
Nelze nastavit, aby se světlo opakovaně rozsvěcelo spolu s budíkem? Synchronizace? Tenhle pojem vývojářům asi nic neříká.
Absence tmavého motivu v roce 2021 jen podtrhuje neochotu cokoliv zlepšovat.
Věřím že i studenti na škole by za pouhý měsíc zvládli aplikaci vyladit mnohem lépe.
Show more
Are you serious?
This is in the speaker section of electronic stores and it HAS NO SPEAKER?! It’s a freaking LAMP and nothing more. Seriously mismanaged branding. Advertising makes it look like a speaker and then you get home with it and tada you have a way over complicated lamp and a buggy app. $50 down the drain.
Very bad app!!!🐽🤦🏻♂️
Bad design!!
slow speed!!
low options!!
delay in update!!!
very bad app
slow speed!!
low options!!
delay in update!!!
very bad app
Ужасно
При запуске приложения группы ламп не находятся автоматически. Приходится подключать сначала каждую по одной, только после этого можно открыть группу. В таймере не работает переключатель с цветного света на обычный белый. В таймере невозможно выбрать яркость свечения, как в предыдущей версии. В приложении много ошибок и недоработок. Служба поддержки не отвечает на запросы.
Show more
Мда
Перестала подключаться к лампе
apple watch
please add apple watch support
thanks
thanks
Tech Support
You are SOL if you ever need help from them. Ever since this “new” app came out I am unable to connect my devices and use the options such as repeat and timer in the app.
HUGE Improvement
This app works a TON better than the 1.0 version. It seems to be hidden among search results which probably explains the confusion. There is a noticeable decrease in the delay between when to tap the display and when the light turns on. The app also looks a bit more aesthetically pleasing. Though there are still plenty of adjustments to be made, you guys are on the right track.
Show more
Full of potential. Full of problems.
I have 4 playbulb rainbows. This app allows me to control some aspect of them, but there is still a long path to become a good app in my honest opinion. Here are a few good that would greatly improve the experience:
- Better color picker. Currently you can’t choose the saturation. You can change the hue and lightness, but the color saturation won’t allow you to choose a bright purple, in example.
- Timed event color picker is even worse, only hue available. Just terrible.
- When using just “white” the bulb is much brighter. Not sure if there is a separated led, but it would be wonderful if we could achieve a brighter result using color (or a combination with the white led)
- Setting timed event is just a mess in general. Interface keeps resetting, can’t use effects, it isn’t clear how to just set the lights to a given configuration and keep them that way when a certain time is reached (and that should be the most basic and clear feature of this option)
- The app need to reconnect to each light manually every time you open it. Common...
- Fade to turn off/on as for sleep and wake timers would be great!
- Opening an API for programmers could lead to great community software for your users! If this can be accessed by something like NodeJS, we would see great implementations for sure. Other companies are giving all sorts of APIs for their smart products.
- Candle effect is really broken. Orange blinks green.
- Some low light with color configuration makes the bulb “flicker to and from black” in a very annoying fashion.
With all that said, thank you for the support and I hope you get my opinion as a good criticism because I really want to keep buying mipow products and the biggest concern now is the app quality!
Thank you
- Better color picker. Currently you can’t choose the saturation. You can change the hue and lightness, but the color saturation won’t allow you to choose a bright purple, in example.
- Timed event color picker is even worse, only hue available. Just terrible.
- When using just “white” the bulb is much brighter. Not sure if there is a separated led, but it would be wonderful if we could achieve a brighter result using color (or a combination with the white led)
- Setting timed event is just a mess in general. Interface keeps resetting, can’t use effects, it isn’t clear how to just set the lights to a given configuration and keep them that way when a certain time is reached (and that should be the most basic and clear feature of this option)
- The app need to reconnect to each light manually every time you open it. Common...
- Fade to turn off/on as for sleep and wake timers would be great!
- Opening an API for programmers could lead to great community software for your users! If this can be accessed by something like NodeJS, we would see great implementations for sure. Other companies are giving all sorts of APIs for their smart products.
- Candle effect is really broken. Orange blinks green.
- Some low light with color configuration makes the bulb “flicker to and from black” in a very annoying fashion.
With all that said, thank you for the support and I hope you get my opinion as a good criticism because I really want to keep buying mipow products and the biggest concern now is the app quality!
Thank you
Show more
Won’t connect my devices
I tried to connect my MiPow Playbulb Comet to my app and it simply cannot find it or connect to it. Previously, I was using the PLAYBULB X app to control the Comet, however, because the app says that it isn’t supported anymore every time I try to access it, I can’t even use the original app to control my Playbulb Comet. Thanks a lot MiPow
Show more
