ScaffDocs

UP AND OVER • No way through the house? 3D designer › Up and over: the front, a 4-board bridge over the roof on 450 beams, then the back. • One continuous beam each side, on both standards at each end, boxed; legs on boards across the roof. Flat roofs too. • A platform round the chimney, handrails over the party walls when the spec asks, rope and wheel. • Show it stage by stage: the front, the bridge, the back, the partial strike. DRAWN, LISTED AND PRICED • The TG20 drawing gets a sheet for the bridge: plan, section through it, build order and TG20 check. • The load list adds the extra lifts, the bridge, its legs and the chimney platform. • Price It adds the rear elevation and an Up and over line. A SIMPLER 3D DESIGNER • Pick what you're building, then four steps with Next: Building, Scaffold, Extras, Site. Classic panel at the bottom brings back the old list. TEMPORARY ROOFS • Monopitch or duo-pitch on 450, 750 or 780 beams, a ridge cap, a gutter, Monarflex up to the sheets all round. On the drawing, the load list and Price It. FOR THE OFFICE AND THE SITE • Office logins: a username and password for each person in the office, no email needed. Team logins › Add office login, or tick Office when making a login. • Daily site diary: start and finish time, the works, the scaffold, who was on site and photos, signed. • PUWER register: inspect your tools onto one sheet, or one sheet per tool; a No takes it out of use. • Site photos on the RAMS, on their own page.