SF50 TOLD

SF50 TOLD

Vision Jet takeoff and landing

4 ratings
4 reviews
Free

Details

Released
February 9, 2021
Updated
November 7, 2026

Features

SF50 TOLD video #1 for iPhone
SF50 TOLD screenshot #2 for iPhone
SF50 TOLD screenshot #3 for iPhone
SF50 TOLD screenshot #4 for iPhone
SF50 TOLD screenshot #5 for iPhone
SF50 TOLD screenshot #6 for iPhone
SF50 TOLD screenshot #7 for iPhone
SF50 TOLD screenshot #8 for iPhone
SF50 TOLD screenshot #9 for iPhone
iphone
iphoneDuo
ipad
🖼️Get Icon
Icons↘︎

About

This application assists Cirrus SF50 Vision pilots in calculating takeoff and landing performance. It allows users to input weights and weather conditions to determine required runway length, supporting various configurations and runway types.

✓Takeoff and landing performance calculations
✓Automatic and manual weather entry
✓Custom safety factors
✓Non-normal configuration support
✓Runway contamination support
✓Data interpolated from Airplane Flight Manual
Show original description

What's New in SF50 TOLD

4.0.1

November 7, 2026

• Winds aloft come from the Open-Meteo forecast model everywhere. The National Weather Service stopped publishing its winds aloft forecasts on November 3, and since then the climb and terrain profiles have had no winds aloft. • Takeoff and landing distances are read from the AFM tables at pressure altitude, worked out from the field elevation and your altimeter setting, rather than at field elevation. With a low altimeter setting the distances are longer than before, and with a high one shorter. Without an altimeter setting, the field elevation is used and the performance screens say so; takeoff and landing reports show the standard 29.92 inHg, which is the same thing. • The climb and terrain profiles start the climb at 50 feet above the field, where the AFM’s takeoff distance ends, rather than at 35 feet. • The climb gradient needed to clear a NOTAMed obstacle is worked out from the point where the takeoff reaches 50 feet, over the runway remaining plus the obstacle’s distance beyond the departure end. Takeoff reports had left the runway length out, and asked for far more climb than an obstacle needs. • Takeoff and landing reports now stop the maximum weight search at the AFM’s tailwind, crosswind, airport elevation and temperature limits. A runway where one is exceeded shows N/A as its maximum weight, with WND, ELEV or TEMP as the limit, rather than a weight the search never checked. A maximum weight that rests on conditions colder or hotter than the AFM tables cover is marked offscale, as the distances beside it are. • Takeoff and landing reports count a distance read from the nearest edge of the AFM tables as the AFM’s figure when they check it against the runway, so a clamped distance that does not fit limits the weight. • New notes appear on the takeoff screen when an obstacle stands within the takeoff distance, which no climb can clear, and when the temperature is outside the AFM’s limits. The climb gradient note appears only when the climb falls short of what an obstacle requires, and a note says when the pressure altitude was taken from the field elevation. • When an airport’s identifier changes in an airport data update, your favorites, recents and selected airports follow it. About lists every source the airport data comes from, and for airports drawn from openflightmaps, the runway picker offers to report a data error to them. • On iPad and on iPhone Duo’s inner display, Takeoff and Landing show your inputs and the results side by side, so you can see what a change does to the numbers without scrolling.

More

User reviews

Quick, efficient & accurate

Great tool to have. I use it daily as an instructor.

Can’t load weather in latest version

See title. Also, be great if instead of adding pax seats to useful weight, add checkboxes for seats 3-5 and 6-7 in the settings screen. This configuration stays the same in most cases, so the only real variable is pax weights and baggage

Inaccurate Results

I like the simplicity and efficiency of the app but I’m getting different results vs. the AFM for a G2+

For example at 1000’ density, NO WIND, 10c and 6,000 takeoff weight, the app is showing 1,827’ ground roll while the AFM shows 1,955. Distance to 50’ is 2,882’ in the AFM but the app is showing 2,677’
Show more

G2 support?

Will you add G2 support?

Response from developer

G2 and G1 performance is identical so the app works for both. Version 1.4 has just been released with G2+ performance data.

Developer apps

FAQ

What is SF50 TOLD?

SF50 TOLD is a utility application designed to help Cirrus SF50 Vision pilots calculate their takeoff and landing performance. It uses data from the SF50 Airplane Flight Manual to provide runway length requirements based on entered weights and conditions.

Is SF50 TOLD free to use?

Yes, SF50 TOLD is available for free. There are no in-app purchases or advertisements within the application.

What devices does SF50 TOLD support?

SF50 TOLD is supported on both iPhone and iPad devices, making it accessible to a wide range of Apple users.

How accurate is the data in SF50 TOLD?

The app interpolates data from the official SF50 G1 or G2+ Airplane Flight Manual. However, it is crucial for pilots to verify that the performance data used is accurate for current conditions, as the app is not an official FAA or Cirrus Aircraft approved source.

Does SF50 TOLD have ads?

No, SF50 TOLD does not contain any advertisements. The app is completely ad-free.

When was SF50 TOLD last updated?

The latest version of SF50 TOLD was updated on November 1, 2026. This indicates recent development and potential for continued support.

What is the age rating for SF50 TOLD?

SF50 TOLD has an age rating of 4+, meaning it is suitable for users of all ages and does not contain mature content.

Can SF50 TOLD handle different runway conditions?

Yes, SF50 TOLD supports runway contamination and various non-normal configurations, such as FLAPS 50 ICE or FLAPS 0, providing flexibility for different operational scenarios.