DiGiCo S vs SQ+ MixPad

Set yourself free with the DiGiCo S-Series app. It has been designed to be compatible with DiGiCo's S21 and S31 The DiGiCo S App requires V1.4+ of S-Series console software and the iPad connection must be configured on the console. It is not compatible with earlier versions of S-Series software The DiGiCo S app is the perfect way to control your DiGiCo S-Series console straight from your Apple iPad. It allows remote, wireless control of any DiGiCo S-Series mixing console, both S21 and S31, wherever you are. The DiGiCo S App permanently displays an overview of the console layout, so you can select any available console bank and have the same user-friendly operation you’re already familiar with, but without being tied to your console. What you can control: Channel Setup - +48V, polarity, analogue gain, digital trim, channel delay, insert points on/off, meters Mix – channel label, pan, mute, solo, fader level, meters EQ – 4 band EQ plus HPF/LPF Dynamics – all dynamics parameters for all console dynamics modes Auxes – auxiliary send levels, on/off, auxiliary pans Buss Routing – assignment of channels to busses Snapshots – insert new, recall, update, delete Matrix – sends, on/off Graphic EQ – 32 faders and on/off for each unit, flatten all bands Save Session There is also an overview mode for selecting the Bank that you wish to control. Tap the arrow down symbol in the top right corner of the main view Connection details can be saved for different devices Aux Select buttons can (optionally) activate the Solo function for the relevant Aux Channels. Tap the Aux Menu button a second time to activate/deactivate this function.

SQ+MixPad allows control of an SQ+ console over a wired or wireless network. It can be used simultaneously and independently of the SQ+ surface/hardware controls, so it can provide supplementary local control as well as giving the engineer the freedom to move around and mix from different listening positions. Three devices running SQ+MixPad can be connected and used at the same time as using the SQ+ itself, giving four separate points for control of all mixes. V2.0.3 - This version works with SQ5+, SQ6+ or SQ7+ consoles running firmware V2.0.x Please note: It is NOT compatible with SQ-5, SQ-6, SQ-7 or SQ-Rack mixers. It provides the following: Level and Routing Control - Send levels, panning, assignments, pre/post settings and mutes from all channels to all mixes and from mixes to outputs Send and Return levels for FX and RackUltra FX Routing screen with overview and full control DCA and Mute Group control, including assignments Processing Control - Input channel Preamp/DEEP Preamp Model/HPF/Gate/Insert/PEQ/Compressor Mix channel Ext In/Insert/GEQ/PEQ/Compressor DEEP expanders, compressors and GEQ’s FX Parameters and FX Return PEQ RackUltra FX Parameters and return channel PEQ’s Access to all Libraries Patching – Full patching matrix for all Inputs/Outputs and Tie Lines Access to Patch Library ‘1-to-1’ diagonal block patching Offline Mode – Edit and manage Shows, Scenes and Libraries without a connection to the mixer Transfer entire shows between MixPad and an SQ+ Share/store shows to cloud or email (when available on the device) Other features include – Scene/Cue Management Global filters, scene filters and channel safe control Works with unit User Permissions Copy/Paste and Reset functionality Ganging setup AMM control and setup SQ Drive Control Full control of Signal Generator and assignments 6 custom layers with the ability to copy or use/follow desk layers All input/output/processing metering Meters and Channel RTA view and control Mixer Config PAFL setup and selection Channel naming/colour SoftKey and MIDI strips setup and use Follow mixer Channel/Mix Select option