Bend Aid vs Electrician's Sidekick
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Bend Aid
This app uses precise mathematical formulas to calculate conduit and pipe bends, eliminating guesswork. It determines the optimal bend angles and lengths needed for various pipe types, helping professionals work more efficiently and save time and money.
- Accurate mathematical formulas for bending
- Eliminates guesswork in pipe bending
- Calculates smallest possible bend angle
- Solves centerline for any pipe size
- Supports over 20 different bend types
- Provides detailed bend placement and length
Read full descriptionHide full description
Bend conduit right the first time. Bend Aid is a professional conduit bending solver that uses the correct mathematical formulas for the shapes conduit is actually bent into — not the cosecant shortcut, not charts, not correction factors. An offset is not a right triangle. A right triangle has three straight lines; an offset has two bends and a straight section, and gain happens in every bend. The cosecant method has been used for almost 100 years as a "trick of the trade" because the correct math is too complicated to do by hand — it's "close enough most of the time," until a large bend radius or bend angle forces you to fix the bend. It's not your fault you were taught tricks. Bend Aid does the correct math for you. HOW IT WORKS Measure where the conduit has to fit, enter your dimensions, and use the answers to lay out the bend. Measure any two of the four right-triangle values and Bend Aid solves the rest — including the bend angle, which is not the same as the measured angle. Bend Aid solves the whole offset, from the start of the first bend to the finish of the second, and finds the smallest bend angle that fits between obstructions or supports — making wire pulling easier, reducing strain on conductors, and saving fittings, nipples, and material. WHAT BEND AID SOLVES • Offsets — including rack and concentric offsets • Saddles — 3-point and 4-point, with rack and concentric variations • Kicks — simple kicks, rack and concentric kicks, kicks to horizontal or vertical • Nineties — single 90s, back-to-back, rack, and concentric bends • Right triangles — enter any two values, get the rest • Find Bend Radius — measure your bender's true centerline radius • Chart Bender — solve bends using your bender's chart values EVERY ANSWER YOU NEED Bend Aid gives you all the numbers the old methods can't: where every bend mark goes, the total finished length, whether the conduit will still fit in the bender for the second bend, and the layout dimensions to cut and thread to length when needed. WORKS WITH ANY CONDUIT Bend Aid solves the centerline of the bends, so it works with any type and any size of conduit — EMT, rigid, IMC, PVC — and any bender, once you know its centerline radius. YOUR NUMBERS, YOUR FORMAT Enter and read answers in decimal inches, fractions to 1/16" or 1/32", or millimeters. Real-time validation catches entry errors before they reach the conduit. BUILT FOR THE TRADE If your job is skilled labor, you know tools are how the work gets done. Benders, tape measures, levels, and pencils are tools — Bend Aid is the tool that ties them together. Stop guessing, stop practice-bending, stop wasting time and material. Measure, enter, bend.
Electrician's Sidekick
This free tool consolidates essential electrical calculations and reference guides into a single app. It offers precise tools for conduit bending, wire sizing, voltage drop, and conduit fill, designed to enhance fieldwork efficiency and accuracy for professionals. The app functions offline, ensuring constant access to critical information.
- Conduit bending calculator
- Wire sizing and voltage drop calculator
- Conduit fill calculator
- Construction calculator (feet/inches)
- Electrical wiring color charts
- Digital clinometer (level)
Read full descriptionHide full description
Tired of juggling multiple calculators and reference guides on the job? The Electrician's Sidekick app from IDEAL Electrical is a free tool that combines the functions of many electrical calculators into one convenient app. Instantly calculate rolling offsets and bends with the precise conduit bending calculator and integrated level. Determine accurate wire sizing, voltage drop, and conduit fill to meet compliance standards. Designed by pros for pros, this app maximizes your fieldwork efficiency and accuracy from layout to final connection. The calculators continue to function even without internet connectivity, ensuring you always have access to the information you need. Key features include: Connector Selector – input the wire combination and connector style to receive recommendations for the right connector for the job. Smart Meter Connectivity - Connect compatible IDEAL smart test instruments to automatically capture measurements, monitor readings in real time, and document results directly from your mobile device. Wire Sizing & Voltage Drop Calculator – input wire size, voltage, amperage, and length to determine volts and drop percentage. Conduit Bending Calculator – select the type of conduit and desired bend (offset, saddle bend, or rolling offset), then input the angle, offset distance, and clearance. The dynamic display quickly shows the bend required, shrink, and other important information. Conduit Fill Calculator – input the conduit type and the number/size of conductors to calculate the minimum conduit size required for a certain percentage of fill. Construction Calculator – this specialized calculator permits electricians to add and multiply feet and inches and get the answer back in feet and inches. Electrical Wiring Color Charts – provides the wiring code for the various phases in a panel for both 120/280V and 277/480V systems. Clinometer – transform your phone into a digital level with zero/reset options. When placed on a flat surface, it automatically becomes a bubble level. Simplify every job with this all-in-one electrician's companion. Join the thousands of other electricians using the free Electrician’s Sidekick app from IDEAL Electrical. DATA COMM - T568A/T568B Wiring Reference and conduit fill calculator for data cables. Box Fill Calculator - Calculate NEC® box fill requirements in seconds. Account for conductors, devices, grounding conductors, cable clamps, fixture studs, and plaster rings while instantly verifying box capacity and available volume.
Screenshots
Verdict
The clearest difference is price: Electrician's Sidekick at Free against Bend Aid's $3.99. Electrician's Sidekick also leads on update cadence (every 4 months vs every 12 months) and ratings volume (18 vs 1). Bend Aid's advantage is rating (5.0 vs 3.6) and review sentiment (50% vs 33%). On ads, in-app purchases, device support and iOS requirement there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Electrician's Sidekick is free to download; Bend Aid costs $3.99 up front. Neither carries in-app purchases, so what you see is what you pay.
Bend Aid holds the better App Store score, 5.0 against 3.6. That said, the two scores are not equally well evidenced: Electrician's Sidekick has 18 ratings behind it against 1, so its average is the more settled of the two. Written reviews point the same way: 50% of Bend Aid's written reviews are positive against 33% of Electrician's Sidekick's.
Bend Aid ships an update every 12 months, Electrician's Sidekick every 4 months. The most recent releases landed on November 2, 2026 and November 16, 2026 respectively.
| Parameter | Bend Aid | Electrician's Sidekick |
|---|---|---|
| Price | $3.99 | Free — better |
| Rating | 5.0 (1 ratings) — better | 3.6 (18 ratings) |
| Positive reviews | 50.0% of reviews — better | 33.3% of reviews |
| Number of ratings | 1 | 18 — better |
| Update frequency | Every 12 months | Every 4 months — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Free — better |
| Best chart rank | #198 — better | — |
| Devices | iPhone, iPad, Mac — better | iPhone, iPad |
| Requires iOS | 17.6 | 16.0 — better |
| Further details — not scored | ||
| Size | 28 MB | 53 MB |
| Age rating | 17+ | 4+ |
| Developer | P Stroney | IDEAL INDUSTRIES, INC |
Customer experience
Bend Aid
Electrician's Sidekick
In-app purchases
Bend Aid
No in-app purchases
Electrician's Sidekick
No in-app purchases
Questions
Is Bend Aid free?
Is Electrician's Sidekick free?
Which has better reviews, Bend Aid or Electrician's Sidekick?
Do Bend Aid or Electrician's Sidekick have ads?
Which is updated more often, Bend Aid or Electrician's Sidekick?
Other comparisons















