Discord4 vs REAMP
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
Discord4
This stereo pitch-shifting delay app offers three distinct algorithms for vintage, clean, or experimental granular effects. It features tempo-synced delays, a reverb in the feedback loop, and flexible LFO modulation for extensive sound design. Control pitch shifts with MIDI and fine-tune effects with buffer size adjustments.
- Three pitch-shifting algorithms (Vintage, Clean, Granular)
- Tempo-synced and free-running delays
- Reverb in feedback loop for shimmer effects
- Flexible LFO modulation
- MIDI note control for pitch shifting
- True stereo operation with panorama controls
- Resizable vector-based GUI
Read full descriptionHide full description
Discord4 is the Audio Damage stereo pitch shifter, in its fourth generation. Each channel has its own pitch shifter, delay, bandpass filter, and feedback, and every repeat runs back through the shifter, so the same effect can double a vocal, stack fifths into an arpeggio, or send echoes spiraling up or down. Three engines set the character. Vintage is modeled on the H910 and H949 and has their grainy, glitchy character. Modern is cleaner and more transparent. Both have a buffer control from 32 to 2048 samples that changes the character of the shift. Granular cuts the signal into grains from 15 to 100 ms long, with an interval control and a Chaos knob that scrambles them, for anything from soft clouds to complete destruction. Detune the two sides a few cents in opposite directions over a short delay for a wide doubler. Set one side a fifth up, sync the delays, and raise the feedback so each repeat climbs another step. Keep the reverb in the loop for shimmer, then hit Freeze to hold a pad under the part. Turn on MIDI Shift to play harmonies from a keyboard, or ride the pitch wheel for bends. • Three pitch-shift engines: Vintage, Modern, and Granular • True stereo: each side has its own shifter, delay, filter, feedback, and pan, or link them so the right follows the left • Up to three octaves up or down, set by the cent or locked to semitones • Delays up to two seconds per side, free-running or tempo-synced, with feedback and cross-feedback • A bandpass filter in each feedback path, set from an XY pad • A stereo reverb inside the loop, with Freeze to hold the tail indefinitely • Saturation in the loop to keep runaway feedback in check • Two flexible LFOs for pitch, delay time, and filter frequency, shaped by Wave, Skew, and Warp, free from 0.01 to 14 Hz or synced to tempo • MIDI Shift: play the shift amount from a keyboard, with pitch bend, in hosts that send MIDI to effects • A preset browser with folders and favorites, and 50 factory presets from everyday doubling to the thoroughly strange Discord4 runs as an AUv3 plugin inside any compatible iOS host, including AUM, Cubasis, Drambo, and apeMatrix, and as a standalone app with background audio for live input. It is also available for macOS, Windows, and Linux as a desktop plugin. Requires iOS 16 or later. An AUv3 host app is recommended. No subscriptions. No accounts. No nonsense. Buy it once, own it forever.
REAMP
This audio effect processor simulates the sonic characteristics of various analog gear, offering seven distinct models. It's designed for high CPU efficiency and low latency, allowing for subtle or pronounced saturation across different audio sources and genres.
- Seven analog gear models
- Spectral saturation
- Low latency processing
- Dry/Wet mix control
- Factory presets
- Optional 8x oversampling
Read full descriptionHide full description
This effect is a complex spectral saturation processor simulating a set of different analog gear in a new and unique way. Benefits of this algorithm is that it is highly CPU efficient and adds (almost) no latency. The 7 models available are based on real analog gear individually measured in two dimensions; gain responses (-inf dB to +6 dB) at the frequency spectrum 20Hz to 20kHz. This data is used to transform input audio to output audio. Models: Cassette Deck A consumer cassette deck produced in the mid 80’s. This profile adds some nice grit in the lower mids and rolls off the higher spectrum in a very pleasant way. 1/4” Tape Reel A high quality tape reel machine was used for this profile. Set to one channel mode, there was plenty of dynamic bandwidth to capture on this one. Adds some subtle tape saturation that oozes mid 70’s. Preamp Tube Clean / Preamp Tube Drive These two profiles are captured from a high end tube microphone preamp with two different input gain levels (normal gain on the Clean version and a boosted level on the Drive version). Used on only one channel, this profile is very subtle, but the impact adds up when several channels are used simultaneously. Guitar Tube Clean / Guitar Tube Drive The guitar amp used is a well known pro amp used by several pro guitar players, and Just like the Preamp Tube profiles, these are recorded with two different input gain levels. Tube Bass Amp One of the developers friends dad had an old bass amplifier that we borrowed and profiled. Tip: Run a Fender Jazz bass through it and your neo soul licks will sound just like they’re supposed to. Usage: Since there are several models available, this one can be used on almost any type of audio in any genre. The output can span from lo-fi to high-end hifi. One approach is to put it on several tracks with a more subtle setting which makes the essence of the gear simulated add upp. Another is to put it on the mix, or a bus. Since we’re in the digital domain there can be some added aliasing when distorting the signal too much, resulting in an unpleasant high frequency boost. To prevent this, set the HARMONICS switch to SOME or FEW. Feature list • Seven handpicked profiles based on gear we love available. • Spectral drive (four bands) • Dry / Wet mix • Plenty of factory presets • Ultra low latency • Optional 8x oversampling Full documentation available inside the app or at https://klevgrand.se/downloads/reamp-docs/ REAMP works both as a standalone app and as an AUv3 plugin.
Screenshots
Verdict
The clearest difference is price: Discord4 at $3.99 against REAMP's $19.99. REAMP's advantage is review sentiment (100% vs 61%) and rating (5.0 vs 4.7). On ratings volume, update cadence, ads and in-app purchases there is nothing between them.
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Discord4 costs $3.99 and REAMP $19.99 up front. Neither carries in-app purchases, so what you see is what you pay.
REAMP holds the better App Store score, 5.0 against 4.7. Both are backed by a comparable volume of ratings — 31 and 18 respectively. Written reviews point the same way: 61% of Discord4's written reviews are positive against 100% of REAMP's.
Discord4 ships an update every 14 months, REAMP every 9 months. Both last shipped on November 16, 2026.
| Parameter | Discord4 | REAMP |
|---|---|---|
| Price | $3.99 — better | $19.99 |
| Rating | 4.7 (31 ratings) | 5.0 (18 ratings) — better |
| Positive reviews | 61.1% of reviews | 100.0% of reviews — better |
| Number of ratings | 31 — better | 18 |
| Update frequency | Every 14 months | Every 9 months — better |
| Ads | No | No |
| In-app purchases | No | No |
| Monetization | Paid | Paid |
| Devices | iPhone, iPad — better | iPad |
| Requires iOS | 16.0 | 13.0 — better |
| Further details — not scored | ||
| Size | 29 MB | 30 MB |
| Age rating | 4+ | 4+ |
| Developer | Audio Damage, Inc. | Klevgrand Produkter AB |
Customer experience
Discord4
REAMP
In-app purchases
Discord4
No in-app purchases
REAMP
No in-app purchases







