Link Up configurator vs Wakespeed

The LinkUp Configurator is your veratron companion App to wirelessly configure your LinkUp gateway device in a snap. UPGRADE YOUR ANALOGUE SENSORS TO NMEA 2000® The veratron LinkUp gateways bring your analogue sensors to the NMEA 2000® network era. All your boat’s data are now digitally available to be displayed on any NMEA 2000® enabled device. Available in 5 variants to serve different scenario: - Generic resistive (level sensors, temperature sensors, pressure sensors, …) - Pyrometer - Intelligent Battery Sensor (IBS) - Combined Temp/Press sensor - J1939 All NMEA 2000® certified! PLUG-AND-PLAY INSTALLATION The standard Micro-C M12 connector perfectly interfaces with the NMEA 2000® network without the need of additional adapters. No dedicated power supply is required, the LinkUp gateway gets its power directly from the NMEA 2000® network! The embedded LED notifies you the status of the device and its configuration at any time, reducing commissioning and troubleshooting time. WIRELESS CONFIGURATION The configuration of the LinkUp devices has never been so easy. Launch the App and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the LinkUp to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless! Discover more on www.veratron.com

The Wakespeed App allows for simple and reliable configuration, updating, monitoring, and diagnostics of your Wakespeed Offshore WS500 and WS500 Pro Advanced Regulator. Create configurations using Wakespeed's 100's of built in of pre-defined, manufacturer recommended configuration parameters for batteries, alternators, and BMS's; select the brand and models you are using from three easy-to navigate screens to create a customized configuration for your regulator -- just pick-n-go. 'Expert Mode' allows the configuration to be further refined and customized, including adjusting the Charge Profile and accessing some of the more advanced options and capabilities. Once you have created your configuration it may be saved for later retrieval, shared with others via the built in 'share' tools (Email, messaging, etc), or sent to your WS500 / WS500 Pro Alternator Regulator. Connect your iPhone or iPad to your WS500 Pro using Bluetooth to configure, monitor, update, or take logs. With your WS500 regulator 'share' your configuration with a Windows based PC and use the Wakespeed "Universal Configuration Utility" (downloadable at http://www.wakespeed.com/technical ) and a USB cable. Alternatively you can share the configuration to an Android based phone for direct transfer using an OTG adapter. Configuration and updating can even be done before the WS500 / WS500-Pro is installed by powering it through the USB port. Key features include: · Configure, Update, Monitor your WS500 Pro using Bluetooth directly from yoru iPhone or iPad. · Simple 'pick from the list' of 100's of pre-defined Alternators, Batteries, and BMS's to create a reliable and optimized configuration for your install · Save and retrieve configurations for later use. · Share configurations with others using built-in share tools · Import configurations which have been shared with you for use, modification, and/or sending to your regulator. · Share the configuration for later transfer using a Windows based transfer tool. · Advanced 'Expert Mode' allows for modification of pre-defined values, as well as access to advanced features. For more information on this application, supporting tools, as well as the WS500 Advanced Alternator Regulator, visit http://www.wakespeed.com  Email: support@wakespeed.com if you have any questions or need technical support.