RadioactivityCounter vs Magnetic Detector, Stud Finder
Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.
RadioactivityCounter
Transform your phone into a functional radioactivity counter. Measure gamma and some beta radiation using your device's camera sensor after calibration. Useful for personal use and experimentation with radiation sources.
- Real radioactivity counter functionality
- Converts phone into Geiger Müller Counter
- Measures gamma and some beta radiation
- Requires calibration for accuracy
- Expert setup for precise measurements
- Supports various iPhone and iPad models
Read full descriptionHide full description
RadioactivityCounter This application is a real working radioactivity counter without any extra hardware needed ! It will turn your phone into a Geiger Müller Counter to measure radioactivity after proper calibration. ** Attention after upgrading iOS to a higher iOS do the calibrate again, as camera data properties might have changed ** Disclaimer: The type of radiation picked up by the camera can be dangerous/detrimental to the user's health as well as cause damage to the device. Important note: The camera sensor can measure gamma radiation (CS137 for example) and some beta radiation (depends on the energy if the beta rays can pass through the plastic parts - for example H3 or K14 are weak sources). It cannot measure alpha rays (PO210) For AM241 though its primary a Alpha source also some gamma radiation is emitted and might be detectable for a longer measurement. Please check our homepages for examples and hints on how to measure. We did calibrations with several iPod2*, IPhone 3GS*, iPhone 4*, iPhone 4S, iPhone5, iPhone 5S iPhone 6, 6s and iPad 2, iPad 3* devices at the Helmholtz Research Centre, Munich. we used a CS137 test source from 10 µGy/h till 1 Sv/h for each of the phones we had. The values are stored for a rough start on the application (all devices differ a little bit). For precise professional measurement the devices must be adjusted to the sensor which is possible with the expert setup. For personal use the defaults should be sufficient (please give us feedback). * = Attention some phone might not be compatible due the new version of iOS or missing features (gps precision using sim cards)- please try to use an older rev of the App which should be available according to my settings (1.3).
Magnetic Detector, Stud Finder
Transform your iPhone into a powerful magnetic field and metal detector. Easily scan walls for hidden metal objects, measure EMF activity in real-time, and visualize magnetic field changes. Ideal for DIY projects, education, and exploring your surroundings.
- Real-time magnetic field and EMF measurements
- Magnetic metal detection
- Interactive gauge display
- Audible warning for high fields
- Three-axis magnetic field readings
- 3D magnetic field visualization
- Room scanning for hotspots
Read full descriptionHide full description
Turn your iPhone into a powerful Magnetic Detector and Metal Detector. Detect nearby magnetic fields, find hidden metal screws and nails, scan walls for magnetic objects, and measure EMF magnetic field activity in real time using your device's built-in magnetometer. Whether you're searching for metal fasteners behind walls, exploring magnetic sources, or measuring magnetic field strength, Magnetic Detector makes it easy to visualize changes in your surroundings. Magnetic Detector is handy for comparing readings around appliances, walls, and everyday objects. When used as a Metal Detector, it can help you spot nearby iron or steel items by showing changes in the magnetic field. FIND HIDDEN METAL OBJECTS Use your iPhone as a magnetic metal detector to help locate ferromagnetic objects such as iron and steel screws, nails, certain pipes, metal fittings, and other magnetic materials. Move your device slowly along walls or plasterboard to detect magnetic disturbances. Metal fasteners may help indicate the location of hidden wall studs. DETECT & MEASURE MAGNETIC FIELDS Transform your device into a real-time EMF magnetic field meter. Monitor magnetic field intensity with an intuitive digital gauge and observe how measurements change as you approach magnetic objects. The app displays magnetic field strength in: - μT (microtesla) - mG (milligauss) Earth's magnetic field is typically 25–65 μT. 1 μT equals 10 mG. POWERFUL DETECTION FEATURES - Real-time magnetic field and EMF magnetic field measurements. - Magnetic metal detection using your device's built-in magnetometer. - Interactive gauge displaying magnetic field intensity. - Audible warning when the magnetic field exceeds the configured threshold. - Automatic recording of measurements and timestamps. - Three-axis magnetic field readings (Bx, By, Bz). - 3D visualization of magnetic field measurements. - Room scanning to explore magnetic hotspots. - Support for microtesla and milligauss measurements. USE YOUR IPHONE AS A STUD FINDER Searching for hidden screws or nails in a wall? Magnetic Detector can help identify nearby ferromagnetic fasteners that may indicate the position of wooden studs or metal structures. IDEAL FOR DIY, EDUCATION & EXPLORATION Magnetic Detector can be useful for: - DIY enthusiasts and handymen exploring walls for magnetic fasteners. - Students conducting physics experiments and school projects. - Teachers demonstrating magnetic field behavior. - Engineers and technology enthusiasts studying magnetic measurements. - Anyone curious about magnetic activity around electronic devices, speakers, magnets, and other objects. HOW DOES IT WORK? The app uses the magnetometer integrated into your iPhone to measure nearby magnetic field strength. Ferromagnetic objects can produce or disturb local magnetic fields. As you move your device closer to these objects, the magnetic field readings may change, helping you identify potential magnetic sources. Tip: Shake your device to help recalibrate the magnetic sensor. Keep your phone away from magnetic accessories that could interfere with measurements. IMPORTANT INFORMATION Magnetic Detector is designed for personal, educational, and entertainment purposes. It is not a replacement for professional metal detectors, stud finders, electrical wire detectors, or safety equipment. Detection is primarily limited to nearby magnetic and ferromagnetic materials. The app cannot directly detect wooden studs, non-magnetic metals such as copper or aluminum, or reliably identify electrical wiring. Always verify wall conditions with appropriate professional tools before drilling. Accuracy depends on your device, distance, and magnetic interference. If you experience any issues or have suggestions, please contact us and include your device model and iOS version. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/
Screenshots
Verdict
The clearest difference is price: Magnetic Detector, Stud Finder at Free against RadioactivityCounter's $4.99. Magnetic Detector, Stud Finder also leads on rating (4.6 vs 3.1) and update cadence (every 2 months vs every 15 months). RadioactivityCounter's advantage is in-app purchases (none vs 4) and ads (none vs shown).
Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS
Magnetic Detector, Stud Finder is free to download; RadioactivityCounter costs $4.99 up front. Magnetic Detector, Stud Finder sells 4 in-app purchases, starting at $4.99 per 7 days. RadioactivityCounter asks for nothing beyond the download.
Magnetic Detector, Stud Finder holds the better App Store score, 4.6 against 3.1. That said, the two scores are not equally well evidenced: Magnetic Detector, Stud Finder has 446 ratings behind it against 10, so its average is the more settled of the two. Written reviews point the same way: 68% of RadioactivityCounter's written reviews are positive against 90% of Magnetic Detector, Stud Finder's.
RadioactivityCounter ships an update every 15 months, Magnetic Detector, Stud Finder every 2 months. The most recent releases landed on November 18, 2026 and November 19, 2026 respectively.
| Parameter | RadioactivityCounter | Magnetic Detector, Stud Finder |
|---|---|---|
| Price | $4.99 | Free — better |
| Rating | 3.1 (10 ratings) | 4.6 (446 ratings) — better |
| Positive reviews | 68.4% of reviews | 90.3% of reviews — better |
| Number of ratings | 10 | 446 — better |
| Update frequency | Every 15 months | Every 2 months — better |
| Ads | No — better | Yes |
| In-app purchases | No — better | Yes |
| Monetization | Paid | Free with in-app purchases — better |
| Devices | iPhone, iPod | iPhone, iPad, iPod, Apple Watch — better |
| Requires iOS | 8.0 — better | 15.6 |
| Further details — not scored | ||
| Size | 11 MB | 30 MB |
| Age rating | 4+ | 4+ |
| Developer | Dipl.-Ing. Rolf-Dieter Klein | Jose Bello |
Customer experience
RadioactivityCounter
Magnetic Detector, Stud Finder
Bugs and requests
RadioactivityCounter
Not enough reviews yet to summarise bugs or requests.
Magnetic Detector, Stud Finder
Reported bugs
2 issues- Readings sometimes inconsistent or stop at certain thresholds
- Compatibility issues with some devices
Requested features
3 requests- Add support for measuring electric fields
- Improve accuracy and sensitivity
- Provide more detailed readings and analysis
In-app purchases
RadioactivityCounter
No in-app purchases
Magnetic Detector, Stud Finder
- Weekly Full Access$4.997 Days
- Remove Ads - Magnetic Detector$2.99
- Unlock all - Premium & Warning Beep$4.99
- Lifetime Full Access$12.99
Questions
Is RadioactivityCounter free?
Is Magnetic Detector, Stud Finder free?
Which has better reviews, RadioactivityCounter or Magnetic Detector, Stud Finder?
Do RadioactivityCounter or Magnetic Detector, Stud Finder have ads?
Which is updated more often, RadioactivityCounter or Magnetic Detector, Stud Finder?
Other comparisons















