CL StageMix vs M

StageMix is an application for the Apple iPad that provides remote control of Yamaha CL digital mixing console functions via a simple, intuitive graphical interface from anywhere within wireless range. The software has been specifically designed to allow engineers to adjust monitor mixes from the performers’ positions on stage, directly controlling mix parameters via the iPad rather than having to rely on verbal directions to a second engineer. The result is better mixes in less time; a huge advantage during high-pressure pre-show setup. Although StageMix is focused on the requirements for adjusting monitor mixes on stage, its range of features is continually expanding, allowing it to be used for a wider variety of remote control functions.

M-480 Remote is an application for remotely controlling the Roland M-480 V-Mixer live mixing console. ● This application makes it possible to adjust mixing parameters from a variety of listening points on stage or around the room, away from the M-480 positioned at a fixed location. ● Combined with the easy operation afforded by the iPad's large screen and Multi-Touch interface, this application makes it easy to remotely view and adjust settings. ● It is also equally useful as a sub-display and controller when placed beside the M-480 V-Mixer. Controllable parameters: [Channel] - Preamp Gain - Pan - Solo - Mute - Fader - Sends on Fader - 4-Band Parametric EQ and HPF - EQ Copy/Paste/Undo [Bus] - Pan - Solo - Mute - Fader - 4-Band Parametric EQ - EQ Copy/Paste/Undo [Other] - 31 Band Graphic EQ or 8 Band Parametric EQ - GEQ or PEQ Copy/Paste/Undo - Solo Clear - Scene Recall/Store/Clear Viewable-only parameters: [Channel] - Phantom Power Status - Pad Status - Gain Reduction on Gate - Gain Reduction on Compressor - Name and Color - Meter [Bus] - Gain Reduction on Gate - Gain Reduction on Compressor - Name and Color - Meter [Other] - Scene Lock/Filter/Fade Status - Meter Overview Important notes: * Use with the most recent firmware version of the M-480. * A wireless USB adapter (Roland WNA1100-RL) is required. * A wireless LAN router (Wi-Fi router, etc.) is recommended but if not available, connection can be made directly to the wireless USB adapter in ad-hoc mode. * Because the wireless USB adapter occupies the M-480's USB port, functions that use a USB flash key (such as recording, playback, and backing up settings) are not possible while the wireless USB adapter is connected. * A single iPad can be connected at one time. This application cannot be used concurrently with the M-480 RCS PC/Mac remote application software.