Remote Legacy vs Remote Camera Control via Air

Filmic Remote v3 is now called Remote Legacy. Filmic Remote v4 is now integrated directly into Filmic Pro v7.5. Remote Legacy is designed for use with Filmic Pro v7.4.2 and earlier (including Filmic Legacy). It offers wireless control and monitoring of your Filmic Pro experience. Filmic Remote puts your spare iOS devices into the production process. Remote v3 offers three modes of capability: Control, Monitor and Director. Control mode provides the familiar Filmic Pro interface for complete remote camera control over hard to reach camera placements such as sliders, jib arms, car mounts, microphone stand or other compelling live event camera placements. Set up your Filmic Pro device and then control all settings and recordings from the Remote: - Start/Stop record functions. - Focus/exposure reticle placement and locking. - Dual arc slider manual controls for focus and exposure. - Pull-to-point focus and exposure pulls. - Create and load Filmic Pro presets from Filmic Remote. Monitor mode gives you cinema production capability for a fraction of the cost, offering a four-up display with the following powerful analytics: - Video preview: Reference video for use with analytics screens. - Waveform monitor: Visually identifies signal brightness segmented from left to right across a video feed. Used in conjunction with the video preview it can provide a quick snapshot of brightness in your video. - Vectorscope: Displays color saturation, by channel, across the entire image. - Histograms: RGB composite, Luminance, Zone and RGB channel. Director mode provides a clean video preview. This is perfect for providing a director, producer or crew with a device to monitor the production remotely. You can switch between modes on the fly to check analytics and composition. Remote can also be set up in ‘preview-only’ mode allowing a camera operator to perform all controls from the device running Filmic Pro and allowing the Remote to be used solely for monitoring. Create your mobile studio today with Filmic Remote! Notes: - The use of Filmic Remote on one iOS device requires the simultaneous use of Filmic Pro on an additional device. Both devices must be running iOS 13 or later. - Filmic Remote connects to Filmic Pro using Wi-Fi either on an established network or using a peer-to-peer network (for using in areas where a Wi-Fi network is not present). - Filmic Remote can connect to any iPhone or iPad running Filmic Pro and is not cross platform.

The app for remote control of an iPhone/iPad camera using another iPhone/iPad. The two devices use peer-to-peer Wi-Fi, which allows the devices to communicate directly, even if they are not on the same Wi-Fi infrastructure network. This technology is used by AirPlay, AirDrop, etc. In other words, Internet access or a Wi-Fi router is NOT needed. The maximum distance at which a connection can be maintained between two devices is about 20 foot. The app has the following features: • Control the iPhone/iPad camera using another iPhone/iPad. • Show the camera preview image on another iPhone/iPad. • You can enable the use of the device's camera when the same device acts as a screen. Disabled by default. • Manual camera settings, including frame rate settings. • Save camera settings to a list of settings for different situations. Read more about this below. • Lock camera settings with one button. • Select video format from 144p to 4K. • Pause during video recording. • Capturing photos in video recording mode. With the dimensions of the selected video format. • Save photos in HEIC, JPEG, TIFF, PNG, Apple ProRAW formats (if supported by the device). • Taking photos at 48 MP resolution. If the device has cameras that support this resolution. • Various grid options, including the ability to display your own PNG grid file. PNG file must have a transparent background. It is possible to select the thickness of the grid lines. The overlay grid image of the PNG file can be shifted. The PNG file image shifting feature is made for adaptation to the Video Telescope Collimation proposed by Dr. Leon Palmer (https://rigelsys.com/video collimation.html). • A series of photos with a custom time interval between photos and the number of photos in a series. • Overlay photos for subsequent combination of different photos or videos. To overlay a PNG file grid, you need to use a different function in the grid settings. • Averaging a series of frames to remove moving objects. • Slow motion video. • Time-lapse video. • Cinematic video stabilization. • Mirror image flipping on the device acting as a screen. • Timer. • Selecting a location to save photos and videos (including an external drive). In the photo library of the "Photos" app. In the folder of this app or any other app that has a folder in the "Files" app. On an external drive connected to the iPhone/iPad, while the external drive can be encrypted. You can even record video to an external drive, but for this, the write speed to the external drive must be high enough. When saving to something other than the photo library of the "Photos" app, you can create and change subfolders for saving within the already selected location for saving photos and videos. Use the text input field "Subfolder for saving". Using the "/" symbol, you can write several nested folders. For example: "Subfolder/Subsubfolder/SubSubSubfolder/". The nesting level of folders is not limited. • Customize the file name when saving to something other than the photo library in the "Photos" app. Sequence number, date and time, prefix, suffix. • Control the camera "shutter" using the volume buttons or "shutter" remote control button (a selfie stick button, a bluetooth "shutter" remote control button). • Silent mode. • Selecting a camera if the device has several cameras. The frame rate of the device acting as a screen is also adjustable. By reducing the frame rate, you can reduce energy consumption and, therefore, battery life. This is especially important if you are using a very old iPhone/iPad with a weak battery as a screen. The app can be used without a second device, for taking photos and videos with manual camera settings. In the app settings, you can configure the app to launch as a camera, without having to select. The app can work on iOS 12 and newer. This makes it possible to use old iPhones starting with the iPhone 5S and newer as a screen. IMPORTANT!!! SEE THE "HELP" SECTION IN THE APP!