Pipe Fitting vs ECOXGEAR

Pipe Fitting is a pipe fitting calculator for offsets, rolling offsets and elbow cuts. Enter the offset and the fitting angle, and it gives you the travel, the take-out of each elbow and the length to cut, with the welder's gap already allowed for. Example: a 12" offset with two 2" long-radius 45° elbows and a 1/16" gap. The travel is 16.97", each elbow takes out 1.24", and you cut the pipe at 14.36". • Basic offset: any two of run, offset and angle give the travel and the cut length, with or without gaps. • Rolling offset calculator: offset, roll and run (or the angle) give the travel and the cut length. • Parallel offsets: the cutback for pipes running side by side. • Back-to-back elbows: X° + Y° and 90° + X° fittings from a center-to-center distance, with the angle to cut. • Elbow miter cut: cut any angle from a standard 90 and mark it, with the outside (heel), inside (throat) and centerline arcs and the chords. • Take-outs for short-radius, long-radius and 3R elbows, from 1/8" to 48" NPS and DN6 to DN1200. • Triangle solver: any three sides or angles give the rest, plus perimeter and area. • Feet, inches and fractions down to 1/16", or meters, centimeters and millimeters: pick the unit on the keypad. • Results update as you type, and each calculator keeps your last numbers. • Siri: say "Rolling offset with Pipe Fitting" to open it hands-free. • On iPhone and iPad. HOW TO CALCULATE A ROLLING OFFSET True offset = √(offset² + roll²), and travel = √(offset² + roll² + run²). With 45° fittings the run equals the true offset, so the travel is the true offset × 1.414, the 45° offset multiplier. For a 12" offset with an 8" roll: true offset 14.42", travel 20.40". Take off two 1.24" elbows and two 1/16" gaps, and the cut is 17.79". Pipe Fitting does every step for you. Built for pipefitters, steamfitters, pipe welders, plumbers and apprentices, in the shop or on the job site. All seven calculators are free to use with ads; Premium removes them. Made by xNeat, the team behind Calculator+ and Conduit Bending. Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

This ECOXGEAR app is a next generation app for use with E-Z-GO golf carts featuring a ‘Technology Package’. For other SoundExtreme products, like SE28, SE33, and 4 Zone Controller, please use SoundExtreme app. The ECOXGEAR app allows users to select LED lighting mode (brightness, color, pattern, and speed), create custom patterns, and advanced features such as: • Set Up Modes: Use the app to set up the LED light mode for each of the Zones on your LED device. • Create and save lighting scenes. The lighting scene is like the preset of a radio. You can program the LED of each device and area to a specific color and operation for quick access. For example, creating Christmas, July 4th, Halloween, nighttime, and party scenes for one click access later. • Set Up a Group: Create and set up a group of devices (multiple soundbars, or LED Controller). This will allow all the LED lights connected to different devices to be controlled by the ECOXGEAR app at the same time. • Change and customize the names of your devices and areas, such as 28” ECOXGEAR Soundbar, headlights, floorboard lights, etc. • Password protected, others cannot access and control your lighting system.