Comparison

FPV Scanner vs WeldSet

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

FPV Scanner

Features
Read full description

FPV Scanner pairs with the FPV Scanner Module over Bluetooth® to scan the 5.8 GHz FPV spectrum. Choose your FPV equipment (DJI, Walksnail, HDZero, Analog, etc) and watch real time scanning of 5.8 Ghz frequencies, with your channels overlaid. Advanced analytics tell you if a channel is triggered by FPV equipment, so you can see which channels are being used (with historical timeline), and which are open. Label channels with pilot names so you know what your friends are using. Optionally have your device notify you as channels are triggered and available. The module keeps track of the history data, so you can turn on and off the phone or app and still see the last 10 minutes of activity. Key features - Real-time 5.8 GHz scan with per-channel RSSI bars - 10 minute channel history to catch brief activity spikes - Channel activity alerts (optional notifications) - Module management with quick reconnect - OTA firmware updates via your Wi-Fi credentials Requirements - FPV.Scanner.Module hardware: bit.ly/FPVScanner - Bluetooth® enabled on your iPhone/iPad

About

WeldSet

Features
Read full description

WeldSet is a welding settings calculator that works with any brand of machine. Pick the process, metal and thickness and a live setpoint dial settles on your starting amps, with wire feed, voltage, travel speed, heat input, gas and polarity beside it. Tune it on your own machine, then save what actually worked. WHAT MAKES WELDSET DIFFERENT • Any brand, any machine. The numbers are machine-agnostic starting points, not a guide to one manufacturer's welder. • Hands-free with Siri. Say "WeldSet welding settings", pick a process, metal and thickness, and Siri speaks the starting amps without opening the app. • A live setpoint dial. The result is a gauge with the recommended range banded in, and the needle moves as you change the thickness. • A job book for your own machines. Name the machine, dial the amps to what worked, log the volts and wire feed it actually ran (MIG and Flux-core), add a note, and load it back into the dial next time. With the unlock, keep a bead photo with each job. • A settings card. Turn any result into an image to AirDrop or text to the crew. EVERY PROCESS, EVERY METAL MIG, TIG, Stick and Flux-core on mild steel, stainless, aluminum and chrome-moly. Thickness in inches, millimeters or sheet gauge. WHAT YOU GET • Starting amperage with a sensible range • Wire feed speed, voltage, travel speed and heat input (MIG and self-shielded Flux-core), plus gas and polarity • Tungsten, filler rod, gas and polarity (TIG) • Electrode size, rod type and polarity (Stick) • A foreman's tip for the thickness you're on BUILT FOR THE SHOP • Works fully offline: no account, no signup, no signal needed • Free: MIG on mild steel, the dial, the settings card and 3 saved jobs HONEST BY DESIGN Every number is a starting point, not gospel. Verify on your machine and follow your WPS and shop safety. Values are based on published manufacturer and AWS practice. ONE-TIME UNLOCK, NO SUBSCRIPTION A one-time unlock adds TIG, Stick, Flux-core, stainless, aluminum and chrome-moly, unlimited saved jobs and bead photos. The price shows before you buy. Terms of Use (EULA): https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy: https://weldset.aiappnation.com/privacy

Screenshots

FPV Scanner4 screens
WeldSet4 screens

Verdict

The call

The clearest difference is in-app purchases: FPV Scanner at none against WeldSet's 1. WeldSet's advantage is update cadence (every 2 weeks vs every 7 months). On price, ads, device support and iOS requirement there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. WeldSet sells 1 one-off in-app purchase. FPV Scanner asks for nothing beyond the download.

UpkeepUpdate frequency

FPV Scanner ships an update every 7 months, WeldSet every 2 weeks. The most recent releases landed on November 17, 2026 and November 5, 2026 respectively.

Scorecard2 real differences · 4 level
FPV Scanner versus WeldSet: the parameters behind the verdict, then further details
ParameterFPV ScannerWeldSet
PriceFreeFree
Update frequencyEvery 7 monthsEvery 2 weeks — better
AdsNoNo
In-app purchasesNo — betterYes
DevicesiPhone, iPad — betteriPhone
Requires iOS16.0 — better17.0
Further details — not scored
Size54 MB4 MB
Age rating4+4+
DeveloperRichard AmissPLAYRIOT LLC

In-app purchases

None

FPV Scanner

No in-app purchases

1 purchases

WeldSet

One-time1
  • WeldSet Unlock$14.99

Questions

Is FPV Scanner free?
FPV Scanner is free to download, with no in-app purchases.
Is WeldSet free?
WeldSet is free to download, with in-app purchases available.
Do FPV Scanner or WeldSet have ads?
Neither FPV Scanner nor WeldSet shows ads.
Which is updated more often, FPV Scanner or WeldSet?
FPV Scanner ships an update every 7 months, and WeldSet every 2 weeks. Most recently, FPV Scanner was updated on November 17, 2026 and WeldSet on November 5, 2026.

Other comparisons