Comparison

Handi vs CairnOS

Price, ratings, monetisation and update history for both apps, side by side — with what reviewers say about each.

Head to head
About

Handi

This app serves as a comprehensive tool for amateur radio operators, enabling them to connect their radios to mobile devices. It facilitates radio programming, messaging, mapping, and packet-radio communications, including APRS and Winlink email.

Highlights
  • Radio channel management
  • APRS messaging
  • Winlink email
  • Packet terminal communication
  • Interactive APRS map
  • File exchange over packet radio
Features
Read full description

HTCommander is a comprehensive companion for amateur radio operators using EchoLink or supported Bluetooth-enabled transceivers. Connect your radio to your iPhone or iPad and manage programming, messaging, mapping, and packet-radio communications from one application. KEY FEATURES - Configure, organize, import, and export radio channels - Send and receive APRS messages - Inspect packet details and select APRS routing paths - Request weather reports and use supported APRS services - Display APRS stations and position reports on an interactive map - Compose, send, and receive Winlink email with attachments - Communicate through the packet terminal - Operate a built-in bulletin board system - Capture and decode received packets - Manage APRS, Winlink, and terminal contacts - Use supported radio GPS information - Exchange files over compatible packet-radio links SUPPORTED RADIOS HTCommander supports selected models from BTECH, Radioddity, Vero, and Radtel, including the UV-Pro, UV-50Pro, GA-5WB, DB50-B Mini, VR-N75, VR-N76, VR-N7500, VR-N7600, and RT-660. An amateur radio license is required to transmit. Operators are responsible for following local regulations, band plans, and licensing requirements.

About

CairnOS

Communicate off-grid using a mesh network of LoRa radios. Send messages, join channels, and track message paths without cell service or internet. Monitor radio status, network activity, and environmental data.

Highlights
  • Off-grid LoRa mesh messaging
  • Direct messages and channels
  • Message delivery status and retries
  • On-device message translation
  • Radio dashboard and settings
  • Node and repeater management
  • Spectrum analysis and charting
Features
Read full description

CAIRN is a companion app for MeshCore LoRa mesh radios. Pair your radio over Bluetooth or WiFi and send messages through a community-built network of radios and repeaters, with no cell service, no internet and no account. MESSAGING - Direct messages, channels and room servers in one inbox, with filters and favorites on top - Public, private and hashtag channels; share or join a channel by QR code - Delivery status, with retry for failed sends - Emoji reactions, @mentions, forwarding, search and text selection - Every hop of a message's path, on a list and a map - On-device translation of incoming messages - Chats kept on a Cairn touch radio come over to the app when you pair - Block contacts or channel senders, filter keywords and mute conversations - Sign and verify messages with your radio's identity - Optional link previews, with a warning for known malware links DASHBOARD - Battery, chats, nodes nearby, GPS, radio and network at a glance; tap a card for its settings - Your channel live on the Traffic card, in the chart style you pick, with the latest packet under it - Every tool behind one Tools button: Scan & Traffic, Send Advert, Trace Path and more - Sunrise, sunset, uptime and the radio's temperature sensor SETTINGS - One Settings page behind the gear, with search and your radio at the top - Radio presets by region, or set frequency, bandwidth, spreading factor, coding rate and TX power yourself - Front-End LNA and Boosted RX Gain on radios that have them - Firmware updates for nRF52 Cairn radios over Bluetooth, with a log if anything stops NODES & REPEATERS - Saved and heard nodes, with favorites on top, search, sort, filters and a card or list layout - A page for every node, with a map, readings and quick actions - Log in to your repeaters and room servers for status, telemetry, neighbors and an SNR map, and change their settings or use the remote CLI - Send commands to your own companion radios over the mesh (MeshCore 1.18 firmware) - Repeaters and room servers keep time: their clock is set from the phone after an admin login - Telemetry history charts, contact groups, QR sharing and a manual path editor SPECTRUM - Live noise floor, packet traffic, signal margin and airtime on your frequency, moving at the screen's pace - Five chart styles: Modern, Radio Screen, Analyzer, Waterfall and Line Chart, the same on every radio - Full screen like a radio's front panel, readouts along the top and bottom, a swipe between styles - Tap any plot for a marker with that moment's level, height over the floor and age - With a Cairn radio: its own channel history, with trace, heat map and 24-hour noise floor MAPS & GPS - Mesh map with standard, satellite and topographic layers, and offline regions - Live traffic layer that draws each packet across the map - Radio and phone GPS side by side, with a compass and a HUD that points to any node TOOLS - Scan & Traffic: each scan lists the nodes your radio hears directly, with Check Link for repeaters, while the map draws packets moving through the mesh - Nodes on Map: pin the scan's nodes, every node you've heard, your contacts or all of them; tap a pin for its page - Wardrive: repeat scans on the move and map where each node was heard - Network Health, Trace Path, Line of Sight with terrain and Fresnel zone, the RX Log and a CLI terminal IN THE CAR & AROUND iOS - CarPlay: Dashboard, Nodes and Chats, with GPS, Spectrum and Scan for Nodes; hear and answer messages with Siri - Siri and Shortcuts: check radio status, send a message or send an advert - Live Activity and Dynamic Island with connection, battery and unread count - An alert if Cairn may have stopped receiving in the background - Multiple windows on iPad MAKE IT YOURS - A color, gradient or photo background with glass cards over it - A photo or a color for any node - Backup and restore, plus CSV and GPX export

Screenshots

Handi4 screens
CairnOS4 screens

Verdict

The call

Handi and CairnOS both sit at 5.0 stars, but that hides the real split: 100% of CairnOS's written reviews are positive against 67% of Handi's. Handi's advantage is update cadence (every 2 days vs every 5 days) and device support (4 vs 2). On price, rating, ratings volume and ads there is nothing between them.

Scored on Price · Rating · Positive reviews · Number of ratings · Update frequency · Ads · In-app purchases · Monetization · Best chart rank · Devices · Requires iOS

CostPrice · In-app purchases · Ads · Monetization

Both are free to download. Neither carries in-app purchases, so what you see is what you pay.

ReceptionRating · Positive reviews · Number of ratings

On the App Store both sit at effectively the same score — 5.0 for Handi against 5.0 for CairnOS. Both are backed by a comparable volume of ratings — 5 and 2 respectively. Written reviews are what separate them: 67% of Handi's written reviews are positive against 100% of CairnOS's.

UpkeepUpdate frequency

Handi ships an update every 2 days, CairnOS every 5 days. The most recent releases landed on November 13, 2026 and November 16, 2026 respectively.

Scorecard4 real differences · 6 level
Handi versus CairnOS: the parameters behind the verdict, then further details
ParameterHandiCairnOS
PriceFreeFree
Rating5.0 (5 ratings)5.0 (2 ratings)
Positive reviews66.7% of reviews100.0% of reviews — better
Number of ratings5 — better2
Update frequencyEvery 2 days — betterEvery 5 days
AdsNoNo
In-app purchasesNoNo
MonetizationFreeFree
DevicesiPhone, iPad, iPod, Mac — betteriPhone, iPad
Requires iOS15.0 — better18.0
Further details — not scored
Size64 MB60 MB
Age rating4+4+
DeveloperYlian Saint-HilaireChristopher Van Hoose

Customer experience

Handi

All ratings5 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews3 reviews
Positive66.7%
Neutral0.0%
Negative33.3%

CairnOS

All ratings1 ratings
Positive100.0%
Neutral0.0%
Negative0.0%
Written reviews2 reviews
Positive100.0%
Neutral0.0%
Negative0.0%

In-app purchases

None

Handi

No in-app purchases

None

CairnOS

No in-app purchases

Questions

Is Handi free?
Handi is free to download, with no in-app purchases.
Is CairnOS free?
CairnOS is free to download, with no in-app purchases.
Which has better reviews, Handi or CairnOS?
Handi and CairnOS are both rated 5.0 out of 5 on the App Store, from 5 and 2 ratings respectively.
Do Handi or CairnOS have ads?
Neither Handi nor CairnOS shows ads.
Which is updated more often, Handi or CairnOS?
Handi ships an update every 2 days, and CairnOS every 5 days. Most recently, Handi was updated on November 13, 2026 and CairnOS on November 16, 2026.

Other comparisons