Water Eject Speaker Clean vs Speaker Cleaner & Eject Water

Water in your iPhone speaker? If the sound is muffled, Water Eject plays a 15-second low-frequency sound sweep to help push water from the main speaker grille. How it works 1. Turn your volume all the way up. 2. Hold your iPhone with the main speaker facing down. 3. Place a paper towel underneath. 4. Tap Eject Water. The app plays a 200 Hz to 120 Hz sound sweep for 15 seconds. The speaker membrane vibrates during the sweep, helping push water droplets out through the grille. When the session ends, listen to your speaker. If it still sounds muffled, you can run the session again. Designed to run when it matters Water Eject will not start when headphones or an external audio output is connected. It also warns you when the volume is too low for the sweep. If an audio interruption occurs, such as a phone call, the session stops. What it does not do Water Eject cannot detect whether water is present and cannot measure whether the process worked. Your own ears are the only way to tell if the speaker sounds clearer. It helps push water from the main speaker. It does not clean the earpiece, charging port, or microphone. It is not waterproofing, a moisture sensor, or a repair. If your iPhone has sustained water damage or the speaker remains affected, seek appropriate service. One purchase. No subscription. Water Eject is a one-time purchase. There is no subscription, no advertising, and no account required. Open it when you need it, run the 15-second sweep, and check the sound. Terms of Use: https://barissemerci.github.io/water-eject/terms/

Water, dust, and everyday pocket lint can leave your iPhone's speaker sounding muffled or quiet. Speaker Cleaner & Eject Water uses sound, vibration, and simple test tools to help you look after your speaker — all in one app. WATER EJECT & DUST CLEANING • Water Eject – uses a low-frequency sound pattern (around 165 Hz) that may help expel trapped water from your speaker • Dust Cleaning – uses a higher-frequency sound pattern to help loosen dust, lint, and debris from the speaker grille • Auto Clean – automatically runs through multiple cleaning frequency ranges • Vibration Cleaning – uses your iPhone's Taptic Engine to help dislodge stuck particles • 7 Day Cleaner – follow a 7-day routine using Water Eject, Dust Cleaning, and Auto Clean TONE GENERATOR & SOUND TOOLS • Tone Generator – generate adjustable tones from 20 Hz to 20 kHz • Noise Meter – uses your microphone to give an approximate decibel (dB) reading; not a calibrated or professional sound level meter • Speaker Test – play test tones to check your speaker's output • Left Right Test – play test tones through the left, right, and both channels HOW IT WORKS Place your phone speaker-side down, turn up the volume, and start a cleaning or test cycle. PRIVACY • Cleaning and audio processing run entirely on your device • The Noise Meter uses your microphone only while actively measuring sound — nothing is recorded or stored • No account or sign-in required LEGAL Privacy Policy: https://eebconsultancy.github.io/speaker-cleaner-legal/privacy.html Terms of Use: https://eebconsultancy.github.io/speaker-cleaner-legal/terms.html