Leave a Review Screamin' Eagle Street Tuner
Won’t Par
I just installed CA Stage 1 at dealer. Dealer’s iPhone pars fine. My iPhone a iPhone SE iOS 17.2 will not par. Is the CA pro street tuner not able to par with the iPhone SE ??FxrdanCa
Developer Response
You need to manually unpair the Street Tuner if you aren't the original person to pair to the device. It's done that way for security reasons to ensure only you can access the tuner when turned on. Watch the below video/or click the Support Resource Page below, there should be a tech tip for unpairing the BCI, https://www.youtube.com/watch?v=fl9YmDYnRS0&t=9s OR https://serviceinfo.harley-davidson.com/sip/content/document/view?id=1857128383861709181Only screaming eagle parts
A side from the app freezing or not connecting half the times, it only shows screaming eagle after market parts. Does that matter ? Because my exhaust is a bassani and air cleaner is a screaming eagle. Also mpg went down after tune. But of course it was my only option because bike is a under warranty. Getting rid of this garbage as soon as warranty is over. A warranty that is never honored by Harley anyways!! What a waste. Will update to a 3 or 4 stars if it actually works with any brand aftermarket.Show lessEddiekariem
Bluetooth won’t stay connected
Bluetooth won’t stay connected. And it won’t let me see my recordings. And the app won’t let me report a problem it just sends me to the hd website. It’s junk!paul540
Developer Response
Hi Paul. When using the Smart Tune recording mode, disconnecting from other Bluetooth connections is important to ensure a strong signal. Otherwise, your bike may be turning to connect to Bluetooth which can cause an interruption in Smart Tuning. Also, it's important that the Smart Tune process is finished otherwise your bike may still be in recording mode. You can reload the base calibration again to ensure the Smart Tune is closed out.Bluetooth tuner CA model
Wish id have known it would only come with 2 calibrations for the ca model and that they’re both only for stage 2 also that the CA model wouldnt have the auto tune feature or data record and that (hopefully when it comes in) you need the cable to download a stage 1 tune or to even record a ride for auto tune, hopefully this gets fixed cause i dont think the pro street and the auto-tuner are available for 22 and newer cause of the “proprietary” connection port
After reading conners review i got it to do a stage 1 tune im hoping that the autotune feature works when i go for a ride in the morning, assuming the bike has to be on for that, the stage 1 calibration popped up after deleting all the history from my Bluetooth connectionsShow lessEl$u$h1
Developer Response
The California version of the Street Tuner does not allow for Smart Tune. The Smart Tune feature is only available to 49-State models. As of 11/17/2023, we have select '21-'22 Screamin' Eagle Stage 1 & 2 calibrations available. Please see your local California dealership for the specifics! Thank you!Screaming eagle street tuner
I absolutely love this tuner! Plug it in on the left side by the main fuse and download the app for Apple and do the steps of loading the tune (2022 Cvo Roadglide limited) stage 1 basically and took like 4 mins to load and that's it. You can unplug the tuner then if you don't want to change the tune anymore cause people will steal these tuners and I've seen great throttle response, more top end in 4th 5th and 6th gears. Worth every penny. Thanks Harley for another great product!!Show lessTimWin1977
Developer Response
Thanks! We appreciate your review and positive feedback!No problems
Surprised at these reviews, i havent had any trouble, im currently re recording my rides after making a couple mods and everything works as it should. Bike is running good, it didnt turn it into a race bike but its pretty smooth after stage 1. Had no trouble with this app or tuner, i love all the data and sensors and features.Show lessCraw405
Developer Response
Thank you for the review. We are glad you are enjoying the Street Tuner and Mobile App.It’s okay
So far the screaming eagle pro street tuner and smart tune pro has worked ok once I figured out that I had to turn the Lock Screen off on my phone and disconnect my phones Bluetooth pairing from my radio on the motorcycle. There wasn’t any guidance or help from my dealership but from read the instructions and trial and error I’m starting to figure it out. The only thing I will say is that I keep getting ecm software codes along with abs codes that I believe are come from the tuner because I had no codes before the dealer installed the tuner and smart tune pro modules, bike only has 1500 miles on it. I don’t know what’s going on with the codes I will continue to monitor that, but so far the tuners have been ok.Show lessConner's harley
Developer Response
Hello Conner. After loading your final custom calibration, we do recommend that you clear any historic codes. This should be outlined in the tuner steps at the end. Also, we hope to have a in-depth video tutorial on how to use the Street Tuner soon.Terrible terrible purchase, I didn’t want to make
This is my second screaming eagle tuner, and just like the previous model, this is an absolute let down. If we’re being honest I didn’t want this tuner in the first place though. I purchased a 23 RG Limited and had the dealer through on slip-ons, and an air cleaner, after which the dealer told me they don’t do tunes anymore they just sell you the new SE tuner as well. Told them to just make sure they at least use this tuner when they’re done putting the parts on, because I really didn’t want to mess with another SE tuner. In an attempt to reassure me (of how great this tuner is) they told me that this tuner also auto tunes, once installed, so you shouldn’t have to touch it after the initial install. ANYWAY, after a few weeks, the bike just didn’t feel like it was really preforming as well as I expected and felt like it was running a little hot. Decide to give the tuner a shot, immediately regretted it. First, the tuner wasn’t even installed, so I have no idea how it would auto-tune. Once installed, I Tried to use the record option, to see what the issue was and it wouldn’t let me scroll down to select begin recording, tried to go back and reselect the stage one preprogrammed tune and same issue, won’t let me scroll once I’ve clicked on the tab for tuning. The texts are all overlapping, the various tabs do not work, just complete junk…. If you’re still reading save yourself some time, money, and a lot of aggravation and just get an aftermarket tuner.Show lessNotaFanSE
Developer Response
Hello. Smart Tune is a function within the Pro Street Tuner, however, it's not an automatic process as you describe it. There might be some confusion there. We also offer a Automatic Tuning (Wideband) Module, but, that is not this product. Please see your local dealership in regards to their installation of the Street Tuner on your vehicle. It sounds like your phone settings are causing an issue with the app. We have seen this before with phone settings. I'd recommend resizing your phone icon/screen back to the normal factory-phone settings in order for it to read correctly.DONT WSTE YOUR MONEY OR TIME…
Absolute crap don’t waste your time nor your money on this junk for an app..freezes up locks up will not save a recording for smart tune and shuts completely down in the middle of recording for a tune….downloaded it and uninstalled it FOUR TIMES as per the dealerships instructions because there is not a single fix for any of the problems …I bought the blue tooth tuner wasn’t told ya needed both tuners to get any wide band configurations absolutely no tune options for anything other than screaming chicken applications that goes for the wide band as well ….so for 1200 dollars I have to tuners that I cannot properly configure a tune to and an app that is just as worthless…just should have spent 1000 bought another thundermax tuner and would have been done …thanks for nothing and truly proving that I have had my expectations set way to high…won’t happen again count on that.Show lessANGRY Yardgnome
Developer Response
Hello. If you are experiencing issues with the Smart Tune, I'd recommend you check your phone settings to ensure the phone does not lock during the Smart Tune recording sessions. In addition, you are using Bluetooth, ensure a robust connection without any other Bluetooth connections running (i.e. disconnect from your Radio, etc.) during the Smart Tune recording session(s). The Pro Street Tuner will tune with the factory narrow band O2 sensors. The Wideband O2 sensors can be purchased with the (sold separately) Smart Tune Pro Automatic Tuning module. This is not needed for basic Stage I & II setups but recommended for Stage III & IV builds. If you need assistance with tuning, please see your local dealership. Thanks.Bluetooth won’t stay connected
I got this at sturgis. I should’ve read the reviews. It won’t stay connected and lost my original tune so my bike has been running like crap. Going to take it to my dealer soon as I get home in 3 days. Just hope this 500$ P.O.S. Doesn’t destroy my 32k bike.Developer Response
Hi Paul. When using the Smart Tune recording mode, disconnecting from other Bluetooth connections is important to ensure a strong signal. Otherwise, your bike may be turning to connect to Bluetooth which can cause an interruption in Smart Tuning. Also, it's important that the Smart Tune process is finished otherwise your bike may still be in recording mode. You can reload the base calibration again to ensure the Smart Tune is closed out.
